Abstract:In recent decades, numerous studies have indicated the substantial role semiconductors could play in photocatalytic processes for environmental applications. Materials that contain a semiconductor as a photocatalyst have a semi-permanent capacity for removing harmful gases from the ambient air. In this paper, the focus is on TiO2. Heterogeneous photocatalysis using TiO2 leads to the degradation of NO/NO2, benzene, toluene, and other priority air pollutants once in contact with the semiconductor surface. Preliminary evidence indicates that TiO2-containing construction materials and paints efficiently destroy the ozone precursors NO and NO2 by up to 80% and 30%, respectively. Therefore, the development of innovative coatings containing TiO2 as a photocatalyst was in the foreground of research activities. The aim of this was for coatings to be used as building and construction materials, mainly outdoors, e.g., on building façades on high-traffic roads for the degradation of priority air pollutants (NOx and volatile organic compounds) in the polluted urban atmosphere. Though there are advantages connected with the application of TiO2, due to its band gap of 3.2 eV, these are limited. TiO2 is effective only in the UV region (ca. 5%) of the solar spectrum with wavelengths λ < 380 nm. Hence, efforts are made here, as in many research studies, to dope TiO2 with transition metals to increase its activity using visible light, which will extend its application to indoor environments. In our studies, experiments were conducted with 0.1% (w/w) and 1% (w/w) Mn-TiO2 admixtures, and the ability of the modified photocatalysts to degrade NO by both solar and indoor illumination was evaluated. The surface chemistry at the air/catalyst interface, governed by the photoelectric characteristics of TiO2 and the formation of reactive oxygen species with co-occurring redox reactions, is reviewed in this paper. The factors affecting the application of TiO2 for the degradation of priority air pollutants as single compounds or mixtures are discussed. We investigated, particularly, the degradation of mixtures of priority compounds at typical concentrations in ambient air and confined spaces. This is a realistic approach, because pollutants are present as mixtures, rather than as individual compounds in ambient and indoor air. Moreover, organic polymers as paint constituents were found to be the primary source for carbonyl formation, e.g., formaldehyde, acetaldehyde, etc., during the heterogeneous photocatalytic processes conducted on TiO2-enriched coatings.

Unravelling the role of TiO 2 nanoparticles on the optical performance of dark colourants for coatings

Effect of TiO2 pigment gradation on the properties of thermal insulation coatings

Synthesis of Black TiOx Nanoparticles by Mg Reduction of TiO2 Nanocrystals and Their Application for Solar Water Evaporation

Application of Infrared Reflective Pigment in Architectural Coatings

Scalable Titanium Dioxide-Free Coatings for Self-Adaptive Passive Radiative Cooling and Heating

The Effect of Optical Properties on Photovoltaic Performance in Dye-Sensitized Tio2 Nanocrystalline Solar Cells

Scalable and waterborne titanium-dioxide-free thermochromic coatings for self-adaptive passive radiative cooling and heating

Extracting optical parameters of Cu-Mn-Fe spinel oxide nanoparticles for optimizing air-stable, high-efficiency solar selective coatings

Dye-Sensitized Commercial TiO2 for the Construction of Robust Nanocoatings with the Enhanced Transmittance and Visible-Light-Activated Photocatalytic Self-Cleaning Properties

Recent Advances in Black TiO2 Nanomaterials for Solar Energy Conversion

Photo-Induced Degradation of Priority Air Pollutants on TiO2-Based Coatings in Indoor and Outdoor Environments—A Mechanistic View of the Processes at the Air/Catalyst Interface

Study of the optical properties of TiO2 semiconductor nanoparticles synthesized using Salvia rosmarinus and its effect on photocatalytic activity

Agro-waste mediate to synthesize the Solar Light Active Titanium Dioxide Nanoparticles with enhanced efficacy of pollutant removal

A Comparative Study in the Design of TiO2 Assisted Photocatalytic Coatings Monitored by Controlling Hydrophilic Behavior and Rhodamine B Degradation

Visible-Light Active Sulfur-Doped Titania Nanoparticles Immobilized on a Silica Matrix: Synthesis, Characterization and Photocatalytic Degradation of Pollutants

Exploring Structural and Optical Properties of Iodine-Doped TiO2 Nanoparticles in Rhodamine-B Dye Degradation: Experimental and Theoretical Investigation

Titanium Dioxide: A Versatile Earth‐Abundant Optical Material for Photovoltaics

Tuning oxygen vacancy content in TiO2 nanoparticles to enhance the photocatalytic performance

Bandgap engineering of CuO/TiO 2 nanocomposites and their synergistic effect on the performance of dye-sensitized solar cells

Iron-Modified Nano-TiO2: Comprehensive Characterization for Enhanced Photocatalytic Properties

Characterization of Optical Response Properties for A Nanosized Tio2 with Visible-Light Response