Abstract:A nanocomposite (TiO 2 /NiFe 2 O 4 @MWCNTs) was synthesized through hydrothermal methods, combining NiFe 2 O 4 , TiO 2 , and MWCNTs. The material underwent characterization using various analytical methods, including XRD analysis, SEM, TEM, EDS, UV-vis spectroscopy, PL analysis, FT-IR, Raman spectroscopy, and BET analysis. The average size of a nanoparticle is 36 nm, as determined by transmission electron microscopy and the Scherrer formula. UV-visible examination reveals that the TiO 2 /NiFe 2 O 4 @MWCNTs nanocomposite has an energy band gap of 1.5 eV. The resultant nanocomposite has a specific surface area of 70.5 m 2 g −1 and a pore volume of 0.29 cc g −1 . These analyses demonstrated that the inclusion of MWCNTs effectively inhibited charge carrier recombination in both NiFe 2 O 4 and TiO 2 nanoparticles. The catalyst's efficiency was evaluated in a batch reactor under diverse conditions, including different nanocomposite dosages, CIP concentrations, and pH levels. The degradation of CIP was explored through photocatalytic experiments with varying nanocomposite dosages, revealing that a dosage of 0.5 g L −1 resulted in an 83.5% degradation efficiency (CIP: 40 mg L −1 , pH = 6, 120 min, 120 W m −2 ). Different CIP concentrations were also tested, showing that a concentration of 10 mg L −1 achieved a degradation performance of 93.5% (catalyst: 0.5 g L −1 , pH = 6, 120 min, 120 W m −2 ) and an efficiency of 97.2% at a pH of 10. The optimal conditions for CIP degradation were determined as 0.5 g L −1 of nanocatalyst, a CIP concentration of 10 mg L −1 , and a pH of 10. These optimal parameters were then applied to assess CIP degradation using NiFe 2 O 4 and NiFe 2 O 4 /MWCNTs as individual materials. Trapping analyses have established that H + and OH ̇, which are reactive radicals, are the main agents responsible for the breakdown of CIP. The highest agreement with the experimental data was obtained by applying a pseudo-first-order kinetic model, which had an R 2 value of 0.97 for a range of CIP concentrations. Notably, even after four consecutive uses, the photocatalysts maintained their original efficiency, experiencing a minimal decrease of less than 3.2% in CIP degradation. Due to its straightforward synthesis, excellent stability, and potential for recycling, TiO 2 /NiFe 2 O 4 @MWCNTs demonstrated promising performance in degrading CIP antibiotics, suggesting its suitability for removing and breaking down pharmaceutical organic contaminants in water systems.

Efficient electron transport between NiO/Fe 2 O 3 by loading amorphous carbon improves photocatalytic degradation property

Photocatalytic degradation of antibiotics by N-doped carbon nanoflakes-nickel ferrite composite derived from algal biomass

Synthesis of Fe-Modified g-C3N4 Nanorod Bunches for the Efficient Photocatalytic Degradation of Oxytetracycline

Visible light-driven cubic structured NiFe 2 O 4 @MWCNTs/TiO 2 ternary nanocomposite for photocatalytic degradation of ciprofloxacin

Degradation of Oxytetracycline Hydrochloride Using Photocatalysis in the Presence of Fe3O4/rGO/Co-doped ZnO/g-C3N4 Nanocomposite Particles: Experiment, Modeling, Optimization and Mechanistic Evaluation

Extended Interfacial Charge Transference in CoFe2O4/WO3 Nanocomposites for the Photocatalytic Degradation of Tetracycline Antibiotics

Photocatalytic Degradation of Oxytetracycline under Visible Light by Nanohybrids of CoFe Alloy Nanoparticles and Nitrogen-/Sulfur-codoped Mesoporous Carbon

Enabling highly concentrated tetracycline degradation with tailored FeCo nanocrystals in porous graphitic carbon fiber

An electron transfer tuning strategy for the efficient degradation of tetracycline hydrochloride by Fe-N co-doped carbon materials activated with peroxymonosulfate

Synergistic effect of iron and nitrogen on porous carbon to improve electron transfer efficiency resulting in the enhancement of tetracycline hydrochloride removal

Carbon nitride coupled with Fe-based MOFs as an efficient photoelectrocatalyst for boosted degradation of ciprofloxacin: Mechanism, pathway and fate

Performance of Iron-Doped Titanium Dioxide-Loaded Activated Carbon Composite Synthesized by Simplified Sol–Gel Method for Ciprofloxacin Degradation under Ultraviolet Light

Graphite carbon nitride coupled with high-dispersed iron (II) phthalocyanine for efficient oxytetracycline degradation under photo-Fenton process: Performance and mechanism

Nitrogen-defect-modified g-C3N4/BaFe12O19 S-scheme heterojunction photocatalyst with enhanced advanced oxidation technology synergistic photothermal degradation ability of antibiotic: Insights into performance, electron transfer pathways and toxicity

Broad-bandgap porous graphitic carbon nitride with nitrogen vacancies and oxygen doping for efficient visible-light photocatalytic degradation of antibiotics

Assembling g-C3N4 nanosheets on rod-like CoFe2O4 nanocrystals to boost photocatalytic degradation of ciprofloxacin with peroxymonosulfate activation

Synthesis of ZnO/NiO/g-C3N4 Nanocomposite Materials for Photocatalytic Degradation of Tetracycline Antibiotic

Efficient photocatalytic degradation of ciprofloxacin using floating α-NiMoO4/mpg-C3N4/EP under visible light

Confined Fe single atomic sites on (100) plane of anatase TiO 2 nanofibers boost white LED driven Fenton-like norfloxacin degradation

2D/2D FeNi-layered double hydroxide/bimetal-MOFs nanosheets for enhanced photo-Fenton degradation of antibiotics: Performance and synergetic degradation mechanism

Iron phthalocyanine nanodots decorated ultra-thin porous carbon nitride: A combination of photocatalysis and Fenton reaction to achieve two-channel efficient tetracycline degradation