Abstract:In research and development, the most emerging field in digital signal processing and image processing is rounded-based approximated signed and unsigned multipliers. In the present research, we propose some cutting-edge, Preformation, and logic simplification technology connected to processing the Discrete cosine transform (DCT) and Discrete wavelet transform (DWT) images for sharpening. This technology will yield a truncated shifter incorporated with logical XOR-MUX Full adder techniques. A reliable and cost-effective approximate signed and unsigned multiplier was created for the rounding method. While this more advanced technology includes many approximate multipliers, it sacrifices the ability to find the closest integer of a rounded value when combining signed and unsigned capabilities, resulting in higher absolute errors than other approximate multipliers based on rounding. This proposed work will introduce a novel method of Truncated Shifter Rounding-based Approximate Multiplier integrated with a High-Level Synchronous XOR-MUX Full Adder design to minimize the number of logic gates and power consumption in the multiplier architecture. The Truncated RoBA (Rounding-based Approximate Multiplier) with XOR MUX Full Adder will reduce the logic size in the shifter and the arithmetic circuit. The work will modify this rounding-based approximate multiplier to minimize area, delay, and power consumption. This proposed architecture will be integrated with two fundamental changes: firstly, its Barrel shifter method will be replaced with a truncated shifter multiplier with XOR MUX Full Adder, and secondly, the parallel prefix Brent Kung adder will be replaced with a carrying-save adder with XOR MUX Full Adder. Finally, this architecture was designed using Verilog-HDL and synthesized using the Xilinx Vertex-5 FPGA family, targeting the device Xc7Vx485tFFg1157-1. It resulted in a reduction of area LUT (34%), power (1%), delay (32%), and error analysis (75%) when compared to the existing RoBA.

Logic cloning based approximate signed multiplication circuits for FPGA

A Reconfigurable Multiplier for Signed Multiplications with Asymmetric Bit-Widths.

LMM: A Fixed-Point Linear Mapping Based Approximate Multiplier for IoT

Design of Majority Logic-Based Approximate Booth Multipliers for Error-Tolerant Applications

FHAM: FPGA-based High-Efficiency Approximate Multipliers Via LUT Encoding

QUADOL: A Quality-Driven Approximate Logic Synthesis Method Exploiting Dual-Output LUTs for Modern FPGAs

Fast and Low-Cost Approximate Multiplier for FPGAs using Dynamic Reconfiguration

Designing of Energy-Efficient Approximate Multiplier Circuit for Processing Unit of IoT Devices

High-Performance Accurate and Approximate Multipliers for FPGA-Based Hardware Accelerators

PAM: A Piecewise-Linearly-Approximated Floating-Point Multiplier with Unbiasedness and Configurability

FPGA Implementation of an Approximate Booth-Wallace Tree Multiplier

Characterizing Approximate Adders and Multipliers Optimized under Different Design Constraints

FPGA Implementation of High-Performance Truncated Rounding based Approximate Multiplier with High-Level Synchronous XOR-MUX Full Adder

Majority Logic-based Approximate Recording Adders for High-radix Booth Multipliers

Adaptive Approximation in Arithmetic Circuits: A Low-Power Unsigned Divider Design

A Review, Classification, and Comparative Evaluation of Approximate Arithmetic Circuits

Approximate Arithmetic Circuits: A Survey, Characterization, and Recent Applications

A Hardware- and Accuracy-Efficient Approximate Multiplier with Error Compensation for Neural Network and Image Processing Applications

Design of Approximate Radix-4 Booth Multipliers for Error-Tolerant Computing

Deep-PowerX: A Deep Learning-Based Framework for Low-Power Approximate Logic Synthesis

High Speed Low Power Radix 4 Approximate Booth Multiplier