Abstract:Metal organic frameworks (MOFs) are of significant interest for photocatalysis using visible light, but they are typically limited by the instability and high recombination ratio of photoexcited pairs. Integrating MOFs into an inorganic semiconductor is one of the most widespread methods to promote their activity. In this study, a core-shell structured MOF@TiO2 (NH2-UiO-66@TiO2) was synthesized as an efficient photocatalyst for the degradation of toluene. Pristine NH2-UiO-66 was synthesized by a hydrothermal method as the core, which was then coated with an amorphous TiO2 shell. Compared with pristine NH2-UiO-66 and other samples prepared by the direct mixing of NH2-UiO-66 and TiO2, NH2- UiO-66@TiO2 exhibited a higher degradation rate of toluene. Using NH2- UiO-66@TiO2 as a catalyst, the degradation efficiency of toluene reached 76.7% within 3 h, which is 1.48 times higher than that of NH2-UiO-66. The degradation performance was also stable in four repeated reuse experiments, and the slight deactivation was reactivated after washing with ethanol. A series of characterization methods were used to determine the physicochemical properties of NH2-UiO-66@TiO2, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Using the measured physicochemical properties, the photocatalytic mechanism of NH2-UiO-66@TiO2 was explored. NH2-UiO-66 is an ideal photocatalyst, with visible-light response and a huge specific surface area (914.9 m(2).g(-1)), which is favorable for the utilization of sunlight as well as the absorption of pollutants in indoor air. In addition, a new interface formed between the two components (NH2-UiO-66 and TiO2), which efficiently broaden the light absorption area and enhanced the utilization of photogenerated species. The photogenerated holes and electrons could transfer through the interlayer as soon as they were formed. It is speculated that holes would transfer to the HOMO of NH2-UiO-66, and then combine with H2O molecules to form hydroxyl radicals (center dot OH). At the same time, more electrons tended to combine with oxygen molecules in the conduction band of TiO2 rather than recombine with holes. Consequently, the recombination rate of electrons and holes decreased, while the quantity of oxygen radicals and hydroxyl radicals increased. Toluene was efficiently oxidized by these two types of radicals. Owing to the outstanding properties mentioned above, the strategy of constructing NH2-UiO-66@TiO2 is considered to be an effective approach. This work may provide new insights into the design of core-shell structured MOF@photocatalysts for the photocatalytic degradation of indoor air pollutants.

Topology engineering of UiO-66@TiO2-based photoelectrocatalyst for highly efficient degradation of binary pollutants

A H2O2 Oxidation Approach to Ti3C2/TiO2 for Efficient Photocatalytic Removal of Distinct Organic Pollutants in Water.

Single-crystalline Rutile TiO2 Nanorod Array on Flexible Ti Substrates for Efficient Photoelectrocatalytic Degradation of Phenol in Water

Interface and Defect Engineering in 3D Co3O4‐Ov/TiO2 to Boost Simultaneous Removal of BPA and Cr(VI) upon Photoelectrocatalytic/Peroxymonosulfate (PEC/PMS) System

Design and Enhancement of Photocatalytic Activity of Porphyrin Functionalized UiO-66 and Keggin Unit Co-Doped Titanium Dioxide Heterojunction

In situ recombination for durable photoelectrocatalytic degradation of organic dye in wastewater

Heterojunction architecture of pTTh nanoflowers with CuOx nanoparticles hybridized for efficient photoelectrocatalytic degradation of organic pollutants

Engineered defect-rich TiO2/g-C3N4 heterojunction: A visible light-driven photocatalyst for efficient degradation of phenolic wastewater

Fabrication of Ce MOFs/Black-TNTs and CCM/Black-TNTs as high-efficiency photoelectrode for wastewater treatment and hydrogen production

Enhanced photoelectrocatalytic performance of Ti 4 O 7 ceramic electrodes loaded with PbO 2 for wastewater degradation

Photochemical Anti-Fouling Approach for Electrochemical Pollutant Degradation on Facet-Tailored TiO2 Single Crystals.

Interface-engineered dual Z-scheme of BiVO4/NH2-MIL-125(Ti)/POF photoanode with enhanced photoelectrochemical performance

Core-Shell Structured NH2-UiO-66@TiO2 Photocatalyst for the Degradation of Toluene under Visible Light Irradiation

In situ construction of a flower-like Z-scheme Co3O4/CoO heterostructure with superior photoelectrocatalytic performance

Modification of WO 3 Photoanode with NiFe-LDHs Nanosheets Array for Efficient Photoelectrocatalytic Removal of Tetracycline

Designing defect enriched Bi2Ti2O7/C3N4 micro-photo-electrolysis reactor for photo-Fenton like catalytic reaction

Stable Black Phosphorus Encapsulation in Porous Mesh-like UiO-66 Promoted Charge Transfer for Photocatalytic Oxidation of Toluene and o -Dichlorobenzene: Performance, Degradation Pathway, and Mechanism

3D-TNAs/N-TiO 2 photoanode assisted heterogeneous electro-Fenton with a novel Fe-MOFs@CF cathode for efficient synergetic oxidation of organic contaminants

Constructing TiO 2 Nanoparticles Patched Nanorods Heterostructure for Efficient Photodegradation of Multiple Organics and H 2 Production

Modulating the microenvironment of catalytic interface with functional groups for efficient photocatalytic degradation of persistent organic pollutants

Superexchange-induced Pt-O-Ti 3+ site on single photocatalyst for efficient H 2 production with organics degradation in wastewater