Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Materials development and prospective for protonic ceramic fuel cells

Advanced Cathode Materials for Protonic Ceramic Fuel Cells: Recent Progress and Future Perspectives

From Electrolyte and Electrode Materials to Large‐Area Protonic Ceramic Fuel Cells: A Review

Recent Novel Fabrication Techniques for Proton-Conducting Solid Oxide Fuel Cells

Progress in proton‐conducting oxides as electrolytes for low‐temperature solid oxide fuel cells: From materials to devices

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Enhanced Proton Conduction with Low Oxygen Vacancy Concentration and Favorable Hydration for Protonic Ceramic Fuel Cells Cathode

Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion

Advances and challenges in high-performance cathodes for protonic solid oxide fuel cells and machine learning-guided perspectives

Cathode Water Management Towards Improved Performance of Protonic Ceramic Fuel Cells

Readily processed protonic ceramic fuel cells with high performance at low temperatures

Rational design of perovskite ferrites as high-performance proton-conducting fuel cell cathodes

A review of progress in proton ceramic electrochemical cells: material and structural design, coupled with value-added chemical production

Bridging the Gap between fundamentals and efficient devices: Advances in proton-conducting oxides for low-temperature solid oxide fuel cells

Nickel Doping Manipulation Towards Developing High-Performance Cathode for Proton Ceramic Fuel Cells

A comprehensive review of recent progresses in cathode materials for Proton-conducting SOFCs

Recent progress of perovskite-based electrolyte materials for solid oxide fuel cells and performance optimizing strategies for energy storage applications

Improved mechanical strength, proton conductivity and power density in an ‘all-protonic’ ceramic fuel cell at intermediate temperature

Dual Self-Assembled Nanocomposite Cathode for Protonic Ceramic Fuel Cells

3D Printing Enabled Highly Scalable Tubular Protonic Ceramic Fuel Cells

Effects of cathode thickness and microstructural properties on the performance of protonic ceramic fuel cell (PCFC): A 3D modelling study