Abstract:Based on the principle of local resonance and the strategy of hybrid design, in this paper we propose three truss-plate hybrid multifunctional lattice metamaterials featured by the cubic cell topology with a central truss-plate unit connected by the elastic beams to the eight corners. Finite element (FE) simulations were validated by experimental tests on specimens made of TPU substrate material through SLS additive manufacturing technique. At the relative density of 0.31, the specific energy absorption reaches 2.71 J/g, the bandgap width reaches 2.624 KHz, and the elastic wave transmission attenuation at 1400 Hz frequency reaches – 270 dB. Parametric analyses were carried out to investigate the effects of different geometric parameters on the performance indicators. These results highlight the proposed truss-plate hybrid metamaterial as an intriguing multifunctional material with excellent performances in both energy absorption and vibration attenuation, that can be applied to scenarios with multiple engineering requirements.

What problem does this paper attempt to address?

The problem this paper attempts to address is the design of multifunctional truss-plate hybrid lattice metamaterials with broadband vibration attenuation and enhanced energy absorption performance. Specifically, the authors propose three new types of truss-plate hybrid lattice metamaterials based on the principles of local resonance and hybrid design strategies, aiming to overcome the limitations of traditional lattice metamaterials in terms of size, energy absorption, bandgap frequency, and bandgap width. ### Background of the Paper Traditional protective devices such as helmets, bulletproof vests, and knee pads typically consist of a high-rigidity and damage-resistant outer layer and an inner lining for cushioning and energy absorption. However, existing lining materials such as foam have drawbacks such as heavy weight, poor design flexibility, and large fluctuations in mechanical properties. Therefore, researchers have begun to explore new types of protective devices with multiple functions. These devices not only need to have good load-bearing capacity and energy absorption performance but also need to effectively attenuate elastic waves. ### Research Methods 1. **Design Strategy**: - Based on the principles of local resonance and hybrid design strategies, three new types of truss-plate hybrid lattice metamaterials are proposed. - The central node adopts an SC plate element and a conventional truss element, connected to eight corners to form different topologies (BBTP, FBTP, SBTP). 2. **Sample Preparation**: - Samples were prepared using Selective Laser Sintering (SLS) technology with TPU as the base material through 3D printing. - Microscopic examination of the samples was conducted to ensure printing quality. 3. **Validation Experiments**: - **Vibration Attenuation Validation**: Vibration attenuation tests were conducted using a vibration test system (including a vibration table, accelerometer, power amplifier, and PC system) to compare numerical simulations and experimental results. - **Quasi-static Compression Validation**: Quasi-static compression tests were conducted using an electronic universal testing machine to evaluate the mechanical properties of the samples under compressive loads. ### Main Results - **Vibration Attenuation Performance**: - At a relative density of 0.31, BBTP exhibited the best vibration attenuation performance, with a bandgap width of 2.624 kHz and an elastic wave transmission loss of -270 dB at a frequency of 1400 Hz. - Numerical simulations and experimental results were consistent, verifying the accuracy of the FE model. - **Energy Absorption Performance**: - In quasi-static compression tests, the stress-strain curves and deformation modes of the three materials were consistent with the numerical simulation results. - The specific energy absorption of BBTP reached 2.71 J/g, demonstrating excellent energy absorption capacity. ### Conclusion The new truss-plate hybrid lattice metamaterials proposed through the principles of local resonance and hybrid design strategies exhibit excellent performance in vibration attenuation and energy absorption, making them suitable for various engineering needs. These results provide a theoretical and experimental basis for the further development of multifunctional protective devices.

Truss-plate hybrid lattice metamaterials with broadband vibration attenuation and enhanced energy absorption

An Inertant Elastic Metamaterial Plate with Extra Wide Low-Frequency Flexural Band Gaps

Mechanisms of Low-Frequency Bandgap Formation and Energy Absorption of Three-Dimensional Nested Hybrid Lattice Structures

Microlattice Metamaterials with Simultaneous Superior Acoustic and Mechanical Energy Absorption

3D Acoustic Metamaterial-Based Mechanical Metalattice Structures for Low-Frequency and Broadband Vibration Attenuation

Three-dimensional Meta-Truss Lattice Composite Structures with Vibration Isolation Performance

Broadband Low-Frequency Vibration Attenuation in 3D Printed Composite Meta-Lattice Sandwich Structures

Tunable mechanical performance of additively manufactured plate lattice metamaterials with half-open-cell topology

Hybrid Rod-Plate Lattice Metamaterial with Broadband Vibration Attenuation

Truss and plate hybrid lattice structures: Simulation and experimental investigations of isotropy, large-strain deformation, and mechanisms

Multifunctional Hybrid Plate Lattice Structure with High Energy Absorption and Excellent Sound Absorption

Mechanical design and energy absorption performances of novel dual scale hybrid plate-lattice mechanical metamaterials

Lightweight Meta-Lattice Sandwich Panels for Remarkable Vibration Mitigation: Analytical Prediction, Numerical Analysis and Experimental Validations

Broadband low-frequency sound insulation of double-panel metastructures with a perforated lattice truss-core sandwich plate

Low-frequency and broadband vibration absorption of a metamaterial plate with acoustic black hole resonators

Interpenetrating Hollow Microlattice Metamaterial Enables Efficient Sound-Absorptive and Deformation-Recoverable Capabilities

Propagation mechanism of low-frequency elastic waves and vibrations in a new tetragonal hybrid metamaterial

A novel bio-inspired lattice metamaterial for energy absorption and vibration mitigation

Actively tuning of transverse wave band gaps in hybrid sandwich beam metamaterials with shunted piezoelectric array and inertial amplification mechanism

Multiscale modeling and design of lattice truss core sandwich metastructures for broadband low-frequency vibration reduction

A hybrid elastic metamaterial with negative mass density and tunable bending stiffness