Abstract:Although Ni-rich layered oxides are considered a candidate of next-generation cathode materials, their inherent properties, such as surface lithium residues and structural destruction, cause detrimental electrochemical performance, especially at elevated temperatures. Here, a facile ball-milling method is proposed to remove the lithium residues and enhance the electrochemical performance of LiNi0.6Co0.2Mn0.2O2. After NH4VO3 treatment, a lithium ion-conductive Li3VO4 coating layer is found on the LiNi0.6Co0.2Mn0.2O2 surface at heat-treatment temperatures of 300 and 450 °C, with a small part of vanadium ions diffusing into the surface lattice. When the temperature surpasses 600 °C, almost all vanadium ions dope into the bulk structure. The complex relationships between the post-sintering temperature and surface structure and their impact on electrochemical properties are discussed in detail. Electrochemical tests show that 0.5 wt% NH4VO3 treated LiNi0.6Co0.2Mn0.2O2 at 450 °C exhibits much improved cycling stability (96.1% cycling retention at 0.5C after 100 cycles and 97.2% after 50 cycles at 55 °C), rate capability (117.0 mA h g-1 at 5C), and storage property (4683 ppm lithium residue amount after storing in air for 7 days). Such superior performance is ascribed to the Li3VO4 coating layer that inhibits the electrolyte decomposition and helps create a stable and thinner cathode-electrolyte interface, resulting in decreased interfacial resistance. In addition, this coating layer suppresses internal micro-stress and phase transformation from a layered to spinel and rock-salt structure, which increases the structural integrity of LiNi0.6Co0.2Mn0.2O2 during repeated charge-discharge cycling.

Heat Treatment of Mechanochemically Prepared Amorphous LiNi 0.5 Mn 1.5 O 4 –Li 2 SO 4 as High-Voltage Positive-Electrode Material

Effect of High-Temperature Crystallization on the Electrochemical Properties of LiNi0.5Co0.2Mn0.3O2 Synthesized from a Lithiated Transition Metal Oxide Precursor

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

Synthesis and effect of electrode heat-treatment on the superior lithium storage performance of Co 3 O 4 nanoparticles

High‐Temperature Treatment of Li‐Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling

Nano-Crystalline Li1.2Mn0.6Ni0.2O2 Prepared Via Amorphous Complex Precursor and Its Electrochemical Performances As Cathode Material for Lithium-Ion Batteries

Synthesis and Electrochemical Properties of LiNi1/3Co1/3Mn1/3O2 Via an Original Wet-Chemical Route for High Voltage Li-ion Batteries

Revealing the Role of NH4VO3 Treatment in Ni-rich Cathode Materials with Improved Electrochemical Performance for Rechargeable Lithium-Ion Batteries

Structural and Electrochemical Characterization of (Nh4)2hpo4-Treated Lithium-Rich Layered Li1.2Ni0.2Mn0.6O2Cathodes for Lithium-Ion Batteries

Electrochemical Properties of Nano- and Micro-Sized LiNi0.5Mn1.5O4 Synthesized Via Thermal Decomposition of a Ternary Eutectic Li–Ni–Mn Acetate

Facile synthesis of micrometer Li1.05Mn1.95O4 and its low temperature performance for high power lithium ion batteries

Synthesis and characterization of LiNiCoMnO cathode material for rechargeable lithium batteries by polyacrylic acid-assisted sol–gel method

Granularity control enables high stability and elevated-temperature properties of micron-sized single-crystal LiNi0.5Mn1.5O4 cathodes at high voltage

High-rate Performance of LiNi0.5Mn1.45Al0.05O4 Cathode Material for Lithium-Ion Batteries

Synthesis and Electrochemical Properties of LiNi0.5Mn1.5O4 As a 5 V Cathode Material for Lithium Ion Batteries

Study on the Effect of the Pre-treatment Temperature on Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material

Topotactic Phase Transformation of Lithiated Spinel to Layered LiMn0.5Ni0.5O2: The Interaction of 3-D and 2-D Li-ion Diffusion

Preparation of 4.7V Cathode Material LiNi0.5Mn1.5O4 by an Oxalic Acid-Pretreated Solid-State Method for Lithium-Ion Secondary Battery

Enhancing the High-Voltage Electrochemical Performance of the LiNi0.5Co0.2Mn0.3O2 Cathode Materials Via Hydrothermal Lithiation

Structural evolution and formation mechanism of LiNi0.6Co0.2Mn0.2O2 during high-temperature solid-state synthesis

From coating to doping: Effect of post-annealing temperature on the alumina coating of LiNi0.5Mn1.5O4 cathode material