Abstract:Supercapacitors are gaining increasing attention for complementing or replacing batteries and they are highly desirable in applications where high power and long cycle life of energy storage devices are needed. Activated carbons (AC) are the most promising electrodes in the supercapacitor industry presenting the best performances/cost compromise. Recently, graphene, with a two dimensional carbon nanostructure, has emerged as a new class of promising electrode material in supercapacitors, due to its outstanding properties such as high electric conductivity, high surface area, good mechanical properties and chemical inertia. Among the various approaches to producing graphene materials, here we focus on reduced exfoliated graphene oxide (r-GO) derived from chemically synthesised graphene oxide (GO). However, the graphene materials prepared by either chemical or thermal reduction of the graphene oxide always exhibits a relatively low electrochemical performance due to the agglomeration of graphene sheets and does not reflect the intrinsic capacitance of an individual graphene nano-sheet. To exploit the potential electrochemical applications for graphene, a particularly attractive option is to design and develop composites of graphene with other materials. In this study, we present an approach to synthesize a composite of reduced graphene oxide (r-GO) with activated carbon and its use as an electrode material in supercapacitors. To the best of our knowledge, a few studies on the preparation of GO/AC composites have been reported so far. Graphene oxide was synthesised using vein graphite by a modified Hummers method and then mixed with activated carbon to prepare a homogeneous composite. The composite was thermally reduced to convert GO in to r-GO. The morphology and chemical structure of the materials were characterized by means of Electron microscopy, Raman spectroscopy, X-ray diffraction and Fourier Transform Infrared Spectroscopy. Thermal properties were investigated using Thermo Gravimetric Analysis. The electrochemical properties of as obtained composites with different mass ratios were investigated, together with their individual components (GO, r-GO and AC) for comparison. For electrochemical characterisation, two-electrode symmetrical supercapacitor cells were constructed and characterized by cyclic voltammetry and electrochemical impedance spectroscopy. Tetraethylammonium tetrafluoroborate (TEABF4) in Propylene Carbonate (PC) was used as the electrolyte. The CV curves were measured from 0 to 1 V with various scan rates ranging from 10 to 1000 mV s −1 and the CV data were used to calculate the specific capacitances of the electrodes. The results showed that the as-prepared composites exhibited an improved electrochemical performance as compared to pure r-GO or AC. This improvement can be attributed to the synergistic effect of AC and r-GO. The maximum specific capacitance observed for the r-GO/ AC composite was 115.6 F/g at a scan rate of 10 mV s -1 . The near-rectangular CV curves at ultrafast sweep rate of 1000 mV s -1 indicated very efficient charge transfer within the composite electrodes. The incorporation of rGO into AC, not only provides the vacancies to accommodate ions, but also forms a promising network structure to conductively bridge the spaces between the AC particles, which can facilitate rapid transport of the electrolyte ions within the electrode materials, leading to a high-rate performance of the supercapacitor. Within the composite, r-GO plays the role of both the binder and the conductive additive increasing the specific capacitance and the power density of the devices.

Redox-Active Phenanthrenequinone Molecules and Nitrogen-Doped Reduced Graphene Oxide as Active Material Composites for Supercapacitor Applications

Noncovalent Functionalizationof Quinone Derivatives on 2D Graphene for High Performance Pseudocapacitive Electrodes

Sprinkling MnFe2O4 Quantum Dots on Nitrogen-Doped Graphene Sheets: the Formation Mechanism and Application for High-Performance Supercapacitor Electrodes

Boosting the Energy Storage Densities of Supercapacitors by Incorporating N-doped Graphene Quantum Dots into Cubic Porous Carbon

Pseudocapacitance and Excellent Cyclability of Quinones on 2D Graphene

Pseudocapacitance And Excellent Cyclability Of 2,5-Dimethoxy-1,4-Benzoquinone On Graphene

Graphene Oxide and Activated Carbon Composites for High-Power Supercapacitors

Redox‐Active Organic Sodium Anthraquinone‐2‐Sulfonate (AQS) Anchored on Reduced Graphene Oxide for High‐Performance Supercapacitors

A universal strategy to obtain highly redox-active porous carbons for efficient energy storage

Amine-enriched Graphene Quantum Dots for High-pseudocapacitance Supercapacitors

Facile Construction Of Highly Redox Active Carbons With Regular Micropores And Rod-Like Morphology Towards High-Energy Supercapacitors

9,10-phenanthrenequinone anchored on nitrogen-doped carbon nanotubes for symmetrical supercapacitors with enhanced performance

Quinone-Based Imide Conjugated Microporous Polymer-Reductive Graphene Oxide Composite as an Efficient Electrode for Hybrid Supercapacitors

A Review of Supercapacitors Based on Graphene and Redox-Active Organic Materials

Supercapacitors Based on Resveratrol/Reduced Graphene Oxide Composites

Dual Molecules Cooperatively Confined In‐Between Edge‐oxygen‐rich Graphene Sheets as Ultrahigh Rate and Stable Electrodes for Supercapacitors

Ultra-Fine Ruthenium Oxide Quantum Dots/Reduced Graphene Oxide Composite as Electrodes for High-Performance Supercapacitors

Redox‐Active Organic Electrode Materials for Supercapacitors

Electro-sprayed Quaternary Composite of Poly(aniline-co-pyrrole), Graphene Oxide, and Iron Oxide as an Efficient Electrode for Hybrid Supercapacitor Application

Synthesis and Application of Naphthalene Diimide as an Organic Molecular Electrode for Asymmetric Supercapacitors with High Energy Storage

Pseudocapacitive Anthraquinone Modified with Reduced Graphene Oxide for Flexible Symmetric All-Solid-state Supercapacitors