Cross‐Doped Mn/Mo Oxides with Core‐Shell Structures Designed by a Self‐Template Strategy for Durable Aqueous Zinc‐Ion Batteries

Haoran Wang,Ruisheng Guo,Yue Ma,Feng Zhou

DOI: https://doi.org/10.1002/adfm.202301351

IF: 19

2023-05-28

Advanced Functional Materials

Abstract:A unique 1D core‐shell bimetal oxide with cross‐doping of heteroatom is successfully prepared by self‐template method via one‐step hydrothermal reaction. Thick shell of Mo‐doped MnO2 and thin core of Mn‐doped MoO3, as cathode material of Zin‐ion battery, is well designed to promote specific capacity and suppress the capacity degradation of α‐MnO2 cathode material simultaneously. Manganese oxide as the star cathode material of aqueous zinc ion batteries is vigorously developed because of its environmental protection, outstanding theoretical capacity, and high voltage. However, severe Jahn–Teller distortion of trivalent Mn has detrimental effect on cyclic stability. Herein, 1D core‐shell bimetal oxide with cross‐doping of heteroatom is successfully designed by self‐template method via one‐step hydrothermal reaction. Specifically, the thick shell of Mo‐doped α‐MnO2 with increased nanopores, expanded lattice spacing, and high oxidation state not only contributes high capacity but also suppresses the lattice distortion due to the doping of high‐valent Mo6+; While the thin core of Mn‐doped MoO3 nanobelt supplies a shaped template, important Mo source, and improved conductive path. Therefore, this composite exhibits a superior capacity of 366.2 mAh g−1 at 0.2 A g−1 and 100% capacity retention after 100 cycles, which effectively increases to 4.1 times from 1.5 times of pure α‐MnO2 based battery. Besides promoting the electrochemical performance in coin‐cell batteries, composite materials also balance the electrochemical and mechanical performances in flexible micro‐batteries with area energy density of 261.2 μWh cm−2. Therefore, this synergetic self‐template and cross‐doping strategy can extend to the material design of other high‐performance metal oxides for energy storage application.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

The paper aims to address the issue of poor cycling stability of manganese oxide cathode materials in aqueous zinc-ion batteries (ZIBs). Specifically, the paper proposes a novel and effective strategy by designing heteroatom-doped metal oxides with a core-shell structure through a self-template method to improve the electrochemical performance of manganese oxide cathode materials. The specific problems the paper attempts to solve are as follows:

1. **Severe Jahn–Teller Distortion**:
- The Jahn–Teller distortion of trivalent manganese (Mn3+) negatively impacts cycling stability.

2. **Poor Cycling Stability**:
- Manganese oxides undergo irreversible phase transitions and have poor conductivity during charge and discharge processes, leading to severe capacity decay.

3. **Improving Electrochemical Performance**:
- Designing a novel manganese-molybdenum oxide composite material, through heteroatom doping and composite structure design, to enhance the material's electrochemical performance.

The paper addresses these issues by introducing high-valence molybdenum (Mo6+) doping and designing 1D nanobelts with a core-shell structure, significantly improving the cycling stability and specific capacity of aqueous zinc-ion batteries.