Abstract:A quantitative evaluation method is used to monitor the extraction effect of four test holes in a field test conducted at Ping Coal Mine 10. The results indicate that, after adopting in situ downhole repair technology in the early stage of extraction, the average air leakage of Borehole No. 4, which failed due to air leakage in the borehole, decreased from 9.33 to 1.26 L/min (a reduction of 86.5%). Similarly, that of Borehole No. 3, which failed due to penetration of fissures in the surrounding rock, had an air leakage drop from 8.35 to 1.34 L/min (a reduction of 84.0%). These improvements demonstrate the remarkable effectiveness of the method. The quantitative evaluation method established in this study is not only simple to operate but also stable and reliable. In this study, a new method is proposed to quantitatively determine the extraction of boreholes under the effect of time. The main purpose of this method is to divide the gas drilling holes in the monitoring time into two stages: the early stage of extraction and the middle stage of extraction. The early stage of extraction uses the gas pressure difference to detect the gas tightness of the drilling holes and determine the type of gas leakage of the drilling holes. Moreover, the unqualified drilling holes are repaired immediately to ensure that all the drilling holes in the middle stage of the monitoring are the qualified holes at the early stage of the inspection. In the middle of extraction, the average attenuation rate of the fitting attenuation curve of pure gas extraction in the extraction borehole is calculated by monitoring, the growth rate of the linear fitting of the pure air leakage is calculated, and their ratios are used as the basis for judging the repair value of the gas leak borehole and the gas leak borehole. This quantitative evaluation method is used to monitor the extraction effect of four test holes in a field test conducted at Ping Coal Mine 10. The results indicate that, after adopting in situ downhole repair technology in the early stage of extraction, the average air leakage of Borehole No. 4, which failed due to air leakage in the borehole, decreased from 9.33 to 1.26 L/min (a reduction of 86.5%). Similarly, that of Borehole No. 3, which failed due to penetration of fissures in the surrounding rock, had an air leakage drop from 8.35 to 1.34 L/min (a reduction of 84.0%). These improvements demonstrate the remarkable effectiveness of the method. The quantitative evaluation method established in this study is not only simple to operate but also stable and reliable. Thus, it is feasible to be applied in the field, which provides important technical support for the improvement in gas extraction effect during coal mine safety production.

Sampling device and sampling method for accurate determination of coal seam gas content

MEASUREMENT-WHILE-DRILLING METHOD AND DEVICE FOR OBTAINING COAL SEAM GAS PARAMETER

Measurement-while-drilling method and device for assessing outburst risk of coal seam

Research on Gas Content Determination Method of Coal Mine Closed Core

A novel reverse circulation drilling device for the underground sampling to soft coal

A New Method for the Measurement of Gas Pressure in Water-Bearing Coal Seams and Its Application

Research and Application of Sealed coring Technology in In-situ Coal Seam of Directional Long borehole in Coal mine

Research on the Determination Technology of Key Position of Sealing Holes for Gas Extraction Drilling in Zhangcun Coal Mine

Evaluation of Lost Gas in the Borehole Drilling Stage: Implication for the Direct Method of Coalbed Methane Content Determination

A High-Precision and User-Friendly Triaxial Apparatus for the Measurement of Permeability of Gassy Coal

Gas Loss Characteristics of Coalbed Methane-Containing Coal Sampled Using a Freezing Method

Crude-oil sampling device for tracing technology in oil filed well

A Method to Evaluated Gas Content with Coalbed Methane Reservoir Based on Adsorption Theory and Production Analysis

Application of integrated drilling and stamping technology in gas extraction through layer drilling

Investigation into the variation characteristics and influencing factors of coalbed methane gas content in deep coal seams

A Study of the Second Hole Sealing Method to Improve Gas Drainage in Coal Seams

Hole flushing device for coal mine downhole gas extraction drill holes

Interpretation Method for Lost Gas in Deep Coalbed and Its Application

Comprehensive Gas Prevention and Control Technique for Mining the First Seam in Short-Distance Outburst Coal Seam Groups

Quantitative evaluation of the sealing effect of penetrating gas drilling and in situ repairing technology for smooth holes

Determination of Key Technical Parameters in the Study of New Pressure Sealing Technology for Coal Seam Gas Extraction