Abstract:Fe3O4 nanoparticles were synthesized by an eco‐friendly process and were used as adsorbents to remove methylene blue from aqueous solutions. The effects of pH, adsorbent dose, kinetics, isotherm, and thermodynamics parameters were studied. The adsorption systems were found to be compatible with the Langmuir isotherm model and the pseudo‐second‐order kinetic model. The magnetic properties of the adsorbents allow them to be separated from wastewater by simple separation. For the optimization of the adsorption variables, response surface methodology was successfully applied, and optimum values of these variables were determined with a quadratic model equation. Water coloring has the properties of resistance to mutagenic, toxic, aggressive, carcinogenic, destructive, strong light and unstable oxidation and air pollution and has serious effects on environmental systems and human health. Because of its severe toxicity, methylene blue (MB) can cause cancer, mutagenesis, and teratogenic consequences in people as well as enter the food chain. The main objective of this investigation is to study the modeling and the optimization parameters of MB adsorption using a low‐cost adsorbent Fe3O4. The parameters evaluated for adsorption are the adsorbent dosage, pH, contact time, and temperature using the response surface methodology. The principal variables affecting MB removal were pH (3–11), catalyst dosage (0.01–0.3 g), contact duration (10–180 min), and temperature (25–55 °C). To select an experimental domain, a preliminary study was performed first. The results showed that at pH 10, 1.4 g L−1 Fe3O4‐nanoparticles (NPs) had the highest removal efficiency of cationic dye MB (20 ppm) from aqueous solutions by batch adsorption technique. The pseudo‐second‐order (PSO) kinetic models and the Langmuir isotherm provided the best fit for the adoption of MB. The adsorption process was exothermic and spontaneous, according to thermodynamics studies. To determine the effect of the investigated variables and their interaction on the adsorption process, a Box–Behnken design was used. A second‐order polynomial equation was used to model the experimental results. The experimental findings were consistent with the suggested model as demonstrated by the high value of the determination coefficient. The performance of the model equation verified the experimental observation with just a slight divergence, and the values acquired from the experiment and model predictions were found to be in suitable agreement. According to the numerical optimization, 98.61 % is the optimal elimination efficiency for MB adsorption. These results suggest that an adsorption process utilizing Fe3O4 NPs is efficient in environmental remediation.

Enhanced adsorptive removal of methylene blue using ternary nanometal oxides in an aqueous solution

Ternary Metal Oxide Embedded Carbon Derived from Metal Organic Frameworks for Adsorption of Methylene Blue and Acid Red 73.

Hydrothermal synthesis of graphene oxide/multiwalled carbon nanotube/Fe3O4 ternary nanocomposite for removal of Cu (II) and methylene blue

Influence of Mg-doped Ni0.33Zn0.33Co0.33Fe2O4 Nanoparticles on the Methylene Blue Adsorption Efficiency Under Various Operational Parameters

Sol-gel-cum-hydrothermal synthesis of mesoporous Co-Fe@Al2O3−MCM-41 for methylene blue remediation

Adsorption Behavior of Fe3O4/ Poly(Acrylate Methy Lester-co-Divinylbenzene)Microspheres Toward Metal Ions

Adsorption Behavior of Fe_3O_4/Poly(Acrylate Methy Lester-co-Divinylbenzene) Microspheres Toward Metal Ions

Adsorption of Methylene Blue by Halloysite/MnFe2O4 Nanocomposites

Optimization and Adsorption Behavior of Nanostructured NiFe2O4/Poly AMPS Grafted Biopolymer

Fabrication of Fe3O4/Al2O3/CuO magnetic nanocomposite and effective in the photedegradation of methylene blue

Copper nanoparticles supported on magnetic functionalized chicken feather‐derived activated carbon/metal–organic frameworks nanocomposite: As an efficient adsorbent for the removal of methylene blue and a unique heterogeneous catalyst for the synthesis of tetrahydrobenzo[b]pyran derivatives

Synthesis and characterization of thiazolidinone -functionalized MCM-41 and kaolinite nanocomposites as the powerful and new adsorbents for heavy metal removal: process optimization using RSM-CCD

Methylene Blue Adsorption by Fe3O4 Nanoparticles: An Optimization Study Using Response Surface Methodology

Removal of Methylene Blue by Metal Oxides Supported by Oily Sludge Pyrolysis Residues

Functionalized iron Oxide/MOF nanocomposite exhibiting excellent performance for methylene blue adsorption

Simultaneous ultrasound-assisted ternary adsorption of dyes onto copper-doped zinc sulfide nanoparticles loaded on activated carbon: optimization by response surface methodology

Structural Analysis and Adsorption Studies of (PbO, MgO) Metal Oxide Nanocomposites for Efficient Methylene Blue Dye Removal from Water

Optimization by Box–Behnken design for environmental contaminants removal using magnetic nanocomposite

Investigation and characterization of biosynthesized green adsorbent CuO NPs and CuO/Fe3O4 NCs using Adiantum C.V leaf for removal MO dye and Cr(VI) metal ions: thermodynamic, kinetic, and antibacterial studies

Novel ternary mesoporous Co3CsO4-g-C3N4 nanocomposite as an efficient sorbent for Pb (II) and Cu (II) ions elimination

A facile strategy for preparation of Fe3O4 magnetic nanoparticles using Cordia myxa leaf extract and investigating its adsorption activity in dye removal