Abstract:The Cu materials are playing an irreplaceable role in modern marine facilities, while one major issue affecting their service life is corrosion attack caused by external erosion of chloride ions, which leads to the quickly structural deterioration and reduced durability. To solve this obstinate issue, the corrosion−resistant Ni−based composite films with conductive Yttria–stabilized zirconia (YSZ, 2.5–15 g/L) and non−conductive Si 3 N 4 (2.5–15 g/L) reinforcing phases were composite–electrodeposited on Cu substrate in direct current (DC) mode. It was believed that the electrical differences of incorporated nanoparticles have a significant impact on nucleation and growth behaviors during electrodeposition, which further altered the structure and property of Ni−based composite films. Therefore, the emphasis of this study was to establish the correlation between obtained structure, electrochemical, and immersion corrosion performances at different incorporation levels of YSZ/Si 3 N 4 nanoparticles. The results demonstrate that by increasing the total doping contents, the Electrochemical Impedance Spectroscopy (EIS) and Chronoamperometry (CA) measurements exhibited an initial increase followed by a subsequent decrease on co−deposition dynamics, which was related to the dominant impact of conductive YSZ nanoparticle at electrocrystallization process. Meanwhile, the moderate incorporation level of 15 g/L offered effective control over structural compactness through dispersion−strengthening and grain−refining, and the same ratio of YSZ/Si 3 N 4 nanoparticles further maximized the improvement degree of microhardness, electrochemical passivation, and immersion stability of resulting films. Besides, the corrosion current density ( j corr ) of Ni−YSZ−Si 3 N 4 composite coating under optimum condition of 15 g/L was two orders of magnitude smaller than that of Cu substrate after long−term immersion test, and the corresponding polarization resistance ( R p ) also increased by 8.6 times. Overall, these substantial alterations obtained provide effective guideline for the design and preparation of corrosion−resistant Ni−based composite coating, which is beneficial to prolonging the service life of Cu components in saline environments.

Preparation and Performance Study of Zinc Dibenzyl Dithiocarbamate Self‐Assembled Film on Electrodeposited Cu–Ni Alloy Surface

Electrodeposition fabrication of corrosion−resistant Ni–based composite film on surface of Cu: Role of conductive YSZ and non−conductive Si 3 N 4 nanoparticles

Assembly of Metal–Organic Chemical Conversion Layers As Ion Sieves along with Exposing Zn(002) Planes for Stable Zn Metal Anode

Super-hydrophobic film prepared on zinc as corrosion barrier

Super-hydrophobic film prepared on zinc and its effect on corrosion in simulated marine atmosphere

Surface Modification With Zinc and Zn-Ni Alloy Compositionally Modulated Multilayer Coatings

Facile construction of superhydrophobic polydopamine-based film and its impressive anti-corrosion performance on zinc surface

Influence of Electrodeposition Conditions on the Microstructure and Corrosion Resistance of Zn–Ni Alloy Coatings from a Deep Eutectic Solvent

Stabilization of Zn Metal Anode through Surface Reconstruction of a Cerium‐Based Conversion Film

Anti-corrosion Performance of Covalent Layer-by-layer Assembled Films Via Click Chemistry Reaction on the Copper Surface

Design and Fabrication of a Sandwichlike Zn/Cu/Al–Zr Coating for Superior Anticorrosive Protection Performance of ZM5 Mg Alloy

The Performance of Zn-Ni Alloy Coating Electrodeposited from Stabilized Bath

Investigation of the anti-corrosion performance of a Cu/Ni–B4C superhydrophobic coating with self-cleaning and abrasion resistance properties

Electrodeposition of Zinc-Doped Silane Films for Corrosion Protection of Mild Steels

Beta-cyclodextrin-zinc acetylacetonate (β-CD@ZnA) inclusion complex formation as a sustainable/smart nanocarrier of corrosion inhibitors for a water-based siliconized composite film: Integrated experimental analysis and fundamental computational electronic/atomic-scale simulation

Molecularly engineered three-dimensional covalent organic framework protection films for highly stable zinc anodes in aqueous electrolyte

Surface functionalization of Cu–Ni alloys via grafting of a bactericidal polymer for inhibiting biocorrosion by Desulfovibrio desulfuricans in anaerobic seawater

Cu‐Modified Ti3C2Cl2 MXene with Zincophilic and Hydrophobic Characteristics as a Protective Coating for Highly Stable Zn Anode

Anti‐Corrosion for Reversible Zinc Anode via a Hydrophobic Interface in Aqueous Zinc Batteries

ELECTROCHEMICAL, DFT AND MULTISCALE SIMULATION STUDIES ON SELF-ASSEMBLED FILMS OF 2-AMINO-4-METHYL-PYRIDINE INHIBITOR FOR COPPER METAL CORROSION PROTECTION IN 3.5% NaCl MEDIUM

The effect of spherical Zn of Cu2O/ZnAl embedded into ethyl silicate coatings for corrosion and fouling protection of steel