Genetic mechanism of geothermal water in the sandstone reservoir of western Sichuan, SW China: Evidence from hydrochemistry and δD − δ 18 O isotopes

Yunhui Zhang,Rongwen Yao,Chengdong Deng,Xun Huang,Guosen Lv,Xiao Li,Ying Wang

DOI: https://doi.org/10.1016/j.oregeorev.2024.105994

IF: 3.3

2024-03-21

Ore Geology Reviews

Abstract:Geothermal energy is the vital clean and renewable energy in the world. In China, most of sedimentary − type geothermal waters are developed in western Sichuan. Geothermal waters are exposed in the surface as geothermal springs in the Litang county, which was less studied. In this study, hydrochemistry and δD − δ 18 O isotopes were investigated to clarify the genetic mechanism of geothermal waters in the Litang county. The self-organized map and Piper diagram showed three hydrochemical types of geothermal waters: (1) HCO 3 − SO 4 − Na, (2) HCO 3 − Na with low Cl − concentration, (3) HCO 3 − Na with high Cl − concentration. Cluster 1 geothermal water of Na − HCO 3 − SO 4 was dominated by dissolution of silicate and sulfate minerals. Cluster 2 geothermal water of HCO 3 − Na with low Cl − concentration was affected by dissolution of silicate and CO 2 degassing and mixed by large amounts of shallow cold water. Cluster 3 geothermal water of HCO 3 − Na with high Cl − concentration was affected by dissolution of sandstone silicate and CO 2 degassing and mixed by less shallow cold water. The recharge elevation of geothermal water in Litang ranges from 4799 to 4972 m, with an average of 4915 m. This suggests that the recharge sources of geothermal water are snow melt water and magmatic water. Cluster 3 geothermal water displayed the largest contribution of magmatic water. The temperature of HCO 3 − SO 4 − Na geothermal water after mixing is 92−102 °C, with an average of 97 °C; the initial temperature of HCO 3 − Na with low Cl − geothermal water is 60−72 °C, with an average of 65 °C; the initial temperature of HCO 3 − Na with high Cl − geothermal water is 74−91 °C, with an average of 81 °C. The temperature of geothermal water after mixing is Class 1 > Class 3 > Class 2. Analyzing from the perspective of geothermal water temperature, the Class 3 of geothermal water had the highest temperature, followed by Class 1 and Class 2 of geothermal water. From the perspective of cold − water mixing ratio, Class 2 and Class 3 of geothermal water had a similar mixing ratio, slightly higher than that of Class 1 of geothermal water.

mineralogy,geology,mining & mineral processing