Abstract:The transcritical carbon dioxide vapor compression cycle is commonly used for heating and cooling applications because of the high discharge temperature and large evaporation heat. Whereas, high return water temperature is usually required by the heating demands, which significantly degrades the system performances. Nowadays, various kinds of subcooling methods have been proposed for the transcritical carbon dioxide vapor compression cycle, but a systematic comparative study based on the trade-off between the thermodynamic efficiency and economic cost is needed to analyze the applicability of these methods for large-scale district heating and cooling applications. In this work, the hot water temperature increases from 323.15 K to 343.15 K for district heating, and chilled water temperature reduces from 285.15 K to 280.15 K for district cooling. The simple single-stage transcritical carbon dioxide vapor compression cycles using subcooling methods with and without expansion work recovery, including internal heat exchanger, dedicated mechanical subcooling, cooling tower and dry cooler, are respectively modeled from the energetic, exergetic and economic perspectives. Based on the dual-objective Jaya algorithm and Technique for Order of Preference by Similarity to Ideal Solution decision-making method, the parametric study is conducted with optimized system performances to analyze the effects of different ambient conditions, namely the winter mode with ambient temperature from 248.15 K to 278.15 K and the summer mode with ambient temperature from 288.15 K to 318.15 K, and the relative humidity from 30% to 90%. Afterwards, the optimal subcooling methods under different ambient temperatures are selected based on the overall optimization and comparative study. The effects of different ambient temperatures on the system performances vary with different subcooling methods without expansion work recovery, and the dry cooler is the optimal subcooling method at the ambient temperatures from 248.15 K to 268.15 K, while the cooling tower is suggested under ambient temperatures higher than 278.15 K in spite of the performance degradation with high relative humidity. Insignificant differences of system performances using different subcooling methods can be observed with expansion work recovery, and the internal heat exchanger is selected as the optimal subcooling method for winter-mode operations, while the cooling tower is also suggested as the suitable subcooling method in the summer mode.

Thermo-economic analysis of absorption-compression hybrid cooling systems with parallel subcooling and recooling for small scale low-grade heat source and low temperature application

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Performance Analysis on Compression-Assisted Chemisorption Chiller for Data Center Waste Heat Utilization

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Comparative Study on the Energy Performance of Two Different Absorption-Compression Refrigeration Cycles Driven by Low-Grade Heat

Comparative Study on Two Low-Grade Heat Driven Absorption-Compression Refrigeration Cycles Based on Energy, Exergy, Economic and Environmental (4E) Analyses

Thermodynamic evaluation of two-stage refrigeration cycle with deep intercooling and series-parallel integration of thermal and mechanical compression

Parametric Study of Absorption-Compression Hybrid Refrigeration Cycle with Multi-Stage Heat Recovery

New Configurations of Absorption Heat Transformer and Refrigeration Combined System for Low-Temperature Cooling Driven by Low-Grade Heat

Comprehensive Assessment of Solar Energy and Mechanical Power Driving Hybrid Two-Stage Chillers with Deep Intercooling for Cold Storages

Exergoeconomic Analysis of Solar Absorption-Subcooled Compression Hybrid Cooling System

Design and experimental study on a hybrid adsorption refrigeration system using desiccant coated heat exchangers for efficient energy utilization

A Solar-Assisted Hybrid Air-Cooled Adiabatic Absorption and Vapor Compression Air Conditioning System

Performance analysis of a cascade lithium bromide absorption refrigeration/dehumidification process driven by low-grade waste heat for hot summer and cold winter climate area in China

Investigation of a High-Efficient Hybrid Adsorption Refrigeration System Using Desiccant Coated Heat Exchangers

Thermoeconomic Optimization and Comparison of the Simple Single-Stage Transcritical Carbon Dioxide Vapor Compression Cycle with Different Subcooling Methods for District Heating and Cooling

Performance analysis of two-stage CO2 transcritical refrigeration cycles with absorption subcooling and mechanical recooling

Assessment and optimization of solar absorption-subcooled compression hybrid cooling system for cold storage

Optimization and comparative analysis of various organic Rankine cycle-based integrated systems for cooling and power cogeneration utilizing waste heat

Thermodynamic Analysis and Comparison Study of Two Novel Combined Cooling and Power Systems with Separators Using CO2-based Mixture for Low Grade Heat Source Recovery

Differences of energy saving quantities for absorption‐compression hybrid cooling systems with cascade condenser and cascade subcooler