Abstract:The production of thermoluminescence (TL) dosimeters fabricated from B2O3-Caf2-Al2O3-SiO2 doped with Cu and Pr for use in diagnostic radiology is the main goal of this research. The TL samples were synthesized via the melt-quench technique processed by melting the mixture at 1200 °C for 1 h, and, after cooling, the sample thus created was divided into two samples and retreated by heating for 2 h (referred to as TLV30) and for 15 h (referred to as TLV17). SEM and EDS analyses were performed on the TL samples to confirm the preparation process and to investigate the effects of irradiation dosimetry on the TL samples. Furthermore, the TL samples were irradiated with γ-rays using a 450 Ci 137Cs irradiator and variable X-ray beams (5–70 mGy). Two important diagnostic radiology applications were considered: CT (6–24 mGy) and mammography (2.72–10.8 mGy). Important dosimetric properties, such as the glow curves, reproducibility, dose–response linearity, energy dependence, minimum dose detectability and fading, were investigated for the synthetized samples (TLV17 and TLV30), the results of which were compared with the Harshaw TLD-100. The TLV17 dosimeter showed higher sensitivity than TLV30 in all applied irradiation procedures. The dose–response linearity coefficients of determination R2 for TLV17 were higher than TLD-100 and TLV30 in some applications and were almost equal in others. The reproducibility results of TLV17, TLV30 and TLD-100 were less than 5%, which is acceptable. On the other hand, the results of the fading investigations showed that, in general, TLV17 showed less fading than TLV30. Both samples showed a significant decrease in this regard after the first day, and then the signal variation became essentially stable though with a slight decrease until the eighth day. Therefore, it is recommended to read the TL dosimeters after 24 h, as with TLD-100. The SEM images confirmed the existence of crystallization, whilst the EDS spectra confirmed the presence of the elements used for preparation. Furthermore, we noticed that TLV17 had grown dense crystals that were larger in size compared to those of TLV30, which explains the higher sensitivity in TLV17. Overall, despite the fading, TLV17 showed greater radiation sensitivity and dose–response linearity compared with TLD-100. The synthetized TL samples showed their suitability for use as dosimeters in diagnostic radiology radiation dosimetry.

Mechanistic study of the acidic aqueous solution of chrome alum chemical dosimeter: Steady state, pulse radiolysis and conductivity studies

Using the method of chemical dosimetry to evaluate the level of generation of active oxygen forms in advanced oxidation processes based on ultrasound

Rapidly and simply detecting Cr (VI) in aqueous media via a diketopyrrolopyrrole-based chemosensor with both high selectivity and low LOD

Ultrahigh Selective Colorimetric Quantification of Chromium(VI) Ions Based on Gold Amalgam Catalyst Oxidoreductase-like Activity in Water.

A novel organic chromo-fluorogenic optical sensor for detecting chromium ions

Toward the Development of Ultrasensitive Detectors for Environmental Applications: A Kinetic Study of Cr(III) Monitoring in Water Using EDTA and SERS Techniques

Mechanism of Cr(III)-based Oxide-Hydroxide Film Electrodeposition in an Acidic Solution

The study of dosimetric properties of sulfanilic acid in low radiation dose range using the ESR technique

Determination of chromium species in water using diphenylcarbazide with a sequential spectrophotometric discrete robotic analyser

Dosimetric Study of Heat-Treated Calcium–Aluminum–Silicon Borate Dosimeter for Diagnostic Radiology Applications

Estimation of Toxic Hexavalent Chromium (Cr6+) in Metal Components Present in Electronic and Electrical Materials with or without using Coordinating Ligands

Nuclear magnetic resonance relaxometry to monitor chromium (VI) reduction by hydrogen peroxide, ascorbic acid, and aluminum powder

Effect of pH and Nanoparticle Capping Agents on Cr (III) Monitoring in Water: A Kinetic Way to Control the Parameters of Ultrasensitive Environmental Detectors

Optimization and validation of a procedure for the determination of total chromium in postmortem material by ETAAS

Hydroxyanthraquinone dye solutions for radiation dosimetry

An Ultrasensitive Colorimetric Chromium Chemosensor Based on Dye Color Switching under the Cr(VI)-Stimulated Au NPs Catalytic Activity.

Simple fluorochromic detection of chromium with ascorbic acid functionalized luminescent Bio-MOF-1

Study on the Electrodeposition of Chromium from Cr(III) Solution in the Presence of Oxalate and Acetate Anions

Microwave-assisted synthesis of amphoteric fluorescence carbon quantum dots and their chromium adsorption from aqueous solution

Development and Characterization of Newly Engineered Chemosensor with Intracellular Monitoring Potentialities and Lowest Detection of Toxic Elements

STEPWISE DETERMINATION OF ALUMINUM AND CHROMIUM IN WATER AND BIOMEDICAL SAMPLES BY HPLC-UV, BASED ON THEIR DIFFERENT KINETICS WITH 8-HYDROXYQUINOLINE