Abstract:This contribution deals with the assessment of air pollution caused by atmospheric aerosol particulate matter fraction PM10 and benzo[a]pyrene (BaP) in the urban agglomeration of Ostrava, located in the Czech Republic in Central Europe. The motivation for this research was the need to identify the sources of air pollution in the area, particularly in locations where the contribution of different sources to concentrations of pollutants of concern has not been elucidated yet. In this study, source apportionment in the vicinity of the industrial hot spot was performed by statistically evaluating measured pollutant concentrations as a function of meteorological variables and using the Positive Matrix Factorization (PMF) receptor model. A significant methodological innovation and improvement over previous assessments was the higher monitoring resolution of benzo[a]pyrene, with samples collected at three-hour intervals instead of the standard 24 h collection period. The key findings indicate that in the cold part of the year, secondary particles—specifically sulfates and ammonium nitrates—were responsible for the most significant portion of PM10 air pollution throughout the area of interest. The contribution of these particles ranged from one-third to two-fifths of the total concentration, except at the industrial site of Ostrava–Radvanice (TORE), where they accounted for approximately one-fifth of the measured pollution concentration level. Emissions from individual household heating were identified as the main source of this type of pollution. With regards to benzo[a]pyrene air pollution, this study found that in the whole area of interest, except for the Ostrava–Radvanice site, it mainly originated from individual heating with coal (90%). In contrast, at the Ostrava–Radvanice site, two-thirds of the benzo[a]pyrene pollution came from the premises of Liberty Ostrava a.s., primarily from coke production, and less than one-third came from local domestic heating. This study also determined the spatial extent of the occurrence of extremely high benzo[a]pyrene concentrations (above 5 ng/m3), which are estimated to affect nearly 10,000 inhabitants. The results confirm that the data from the TORE station are only representative of its immediate surroundings and are not applicable to the assessment of air quality and causes of air pollution in the whole city of Ostrava or the urban area of Ostrava–Radvanice as a whole. After years of research, these findings provide the Ministry of the Environment of the Czech Republic and the government with an accurate basis for implementing measures to address the identified pollution sources in the area of interest. The success of this study was made possible by the adoption of a more detailed sampling approach, which involved a resolution of 3 h instead of 24 h. This methodological improvement is a significant finding and will be useful for future source apportionment studies.

Determining the PM10 Pollution Sources near the Copper Smelter in Bor, Serbia

Assessment of detected in situ and modeled PM10/2.5 concentration levels during the urban transformation process in Novi Sad, Serbia

Evaluation of PM2.5 Sources in Skopje Urban Area Using Positive Matrix Factorization

Application of Positive Matrix Factorization Receptor Model for Source Identification of PM10 in the City of Sofia, Bulgaria

Seasonal Variation, Chemical Composition, and PMF-Derived Sources Identification of Traffic-Related PM1, PM2.5, and PM2.5–10 in the Air Quality Management Region of Žilina, Slovakia

Positive matrix factorization on elemental concentrations of PM10 samples collected in areas within, proximal and far from mining and power station operations in Greece.

Identification of Causes of Air Pollution in a Specific Industrial Part of the Czech City of Ostrava in Central Europe

Source Apportionment of Particulate Matter in a Metal Workshop

Analyzing the relationship between gas consumption and airborne pollutants: case study of Zagreb, Croatia

Source Apportionment of PM2.5, PAH and Arsenic Air Pollution in Central Bohemia

Annual variation of source contributions to PM 10 and oxidative potential in a mountainous area with traffic, biomass burning, cement-plant and biogenic influences

Source identification and apportionment of PM2.5 and PM2.5−10 in iron and steel scrap smelting factory environment using PMF, PCFA and UNMIX receptor models

Comprehensive assessment of heavy elements and evaluation of potential human health risk in the urban environment: a case study from Novi Sad, Serbia

Estimation and comparison of the environmental impacts of acid mine drainage‐bearing river water in the Bor and Majdanpek porphyry copper mining areas in Eastern Serbia

Fractionation, Mobility, and Contamination Assessment of Potentially Toxic Metals in Urban Soils in Four Industrial Serbian Cities

Source apportionment of ambient PM10 collected at three sites in an urban-industrial area with multi-time resolution factor analyses

The Importance of Measuring Arsenic in Honey, Water, and PM10 for Food Safety as an Environmental Study: Experience from the Mining and Metallurgical Districts of Bor, Serbia

Pollution indices and sources appointment of heavy metal pollution of agricultural soils near the thermal power plant

PM2.5 Characterization and Source Apportionment Using Positive Matrix Factorization at San Luis Potosi City, Mexico, during the Years 2017–2018

Re-Interpretation of Metal(Loid) Concentrations in Urban Soils of Two Different Land Uses by Positive Matrix Factorisation

Health risk assessment of heavy metals in PM2.5 and PM10 in Sarajevo air, Bosnia and Herzegovina