Time-gated Single Photon Counting Lock-in Detection at 1550 Nm Wavelength
Liantuan Xiao,Xiaobo Wang,Guofeng Zhang,Suotang Ji
DOI: https://doi.org/10.5772/12833
2010-01-01
Abstract:Time-gated single photon counting (TGSPC), which employs a single photon detector as the detection apparatus (Poultney, 1972; 1977), has received increasing attention because of its superior spatial resolution and the absence of the so-called classical dead zones (Forrester & Hulme, 1981). TGSPC is a repetitively pulsed statistical sampling technique that records the time of arrival of photons and logs this against the time of emission of a laser pulse. TGSPC have become increasingly important in a number of applications such as time-resolved photoluminescence (Dixon, 1997; Leskovar & Lo, 1976), optical time-domain reflectometry (Lacaita et al., 1993; Benaron & Stevenson, 1993; Wegmuller et al., 2004), time-of-flight laser ranging (Pellegrini et al., 2000; Carmer & Peterson, 1996) and 3D imaging (Moring et al., 1989; Makynen et al., 1994). Ultrasensitive detection with single photon detection capability requires detectors high quantum efficiency and low dark noise. Operation in the 1550 nm spectral region enables it to be worked in fiber, and the eye-safe ranging brings it to be carried out in daylight conditions. In the 1550 nm wavelength implementations, InGaAs/InP avalanche photodiode detectors (APDs) are commonly used (Pellegrini, et al., 2006; Hiskett, et al., 2000; Lacaita, et al., 1996). However, these APDs have low quantum efficiency because the photons may pass through the very thin depletion layer without being absorbed. In addition, these singlephoton detectors exhibit high afterpulse probability, which can cause significant distortion for the measurements. In order to reduce this effect these detectors have to be operated in a time-gated mode. As each photon’s arrival time is an independent measure of range, and accuracy can be improved by increasing the number of samples. Unfortunately, direct photon counting will induce the quantum fluctuation (i.e. shot noise). Time-correlated single-photon counting (TCSPC) is a repetitively pulsed statistical sampling technique that records the time of arrival of photons reflected from a target and logs this against the time of emission of a laser pulse (Becker, 2005). Each photon’s arrival time is an independent measure of flight, and accuracy can be improved by increasing the number of samples. However, the technique’s main disadvantage is an extended data-acquisition time being required where the illumination noise is a serious problem. Weak light detection can be improved by use of the lock-in principle (Stanford Research Systems, 1999). A lock-in detects a signal at a known modulation frequency in amplitude