Abstract:This paper exploits the networked integrated sensing and communications (ISAC) to support low-altitude economy (LAE), in which a set of networked ground base stations (GBSs) cooperatively transmit joint information and sensing signals to communicate with multiple authorized unmanned aerial vehicles (UAVs) and concurrently detect unauthorized objects over the interested region in the three-dimensional (3D) space. We assume that each GBS is equipped with uniform linear array (ULA) antennas, which are deployed either horizontally or vertically to the ground. We also consider two types of UAV receivers, which have and do not have the capability of canceling the interference caused by dedicated sensing signals, respectively. Under each setup, we jointly design the coordinated transmit beamforming at multiple GBSs together with the authorized UAVs' trajectory control and their GBS associations, for enhancing the authorized UAVs' communication performance while ensuring the sensing requirements. In particular, we aim to maximize the average sum rate of authorized UAVs over a given flight period, subject to the minimum illumination power constraints toward the interested 3D sensing region, the maximum transmit power constraints at individual GBSs, and the flight constraints of UAVs. These problems are highly non-convex and challenging to solve, due to the involvement of binary UAV-GBS association variables as well as the coupling of beamforming and trajectory variables. To solve these non-convex problems, we propose efficient algorithms by using the techniques of alternating optimization, successive convex approximation, and semi-definite relaxation. Numerical results show that the proposed joint coordinated transmit beamforming and UAV trajectory designs efficiently balance the sensing-communication performance tradeoffs and significantly outperform various benchmarks.

Integrated sensing and communication-assisted beam rendezvous in airborne networks

Integrated Sensing and Communication Enabled Multi-Device Multi-Target Cooperative Sensing: A Fairness-aware Design

Integrated Sensing and Communication Beamforming Design Based on Mutual Information

Predictive Beamforming for Integrated Sensing and Communication in Vehicular Networks: A Deep Learning Approach

Multi-Beam Integrated Sensing and Communication: State-of-the-Art, Challenges and Opportunities

Integrated Sensing and Communication in Distributed Antenna Networks

Sensing-based Beamforming Design for Joint Performance Enhancement of RIS-Aided ISAC Systems

Beam Scanning Design and Performance Analysis for Near-Field IRS-Aided Integrated Sensing and Communication Systems

Movable Antenna Enabled ISAC Beamforming Design for Low-Altitude Airborne Vehicles

Beam Scanning for Integrated Sensing and Communication in IRS-aided mmWave Systems

Joint Beamforming for Backscatter Integrated Sensing and Communication

Joint Beamforming Design for RIS-Assisted Integrated Sensing and Communication Systems

Integrated Sensing and Communication for Network-Assisted Full-Duplex Cell-Free Distributed Massive MIMO Systems

Integrated Sensing and Communication in Coordinated Cellular Networks

Integrated Sensing and Communications for V2I Networks: Dynamic Predictive Beamforming for Extended Vehicle Targets

Joint Transmit and Receive Beamforming Design in Full-Duplex Integrated Sensing and Communications

B-ISAC: Backscatter Integrated Sensing and Communication for IoE Applications

Networked ISAC for Low-Altitude Economy: Coordinated Transmit Beamforming and UAV Trajectory Design

Simultaneous Beam Training and Target Sensing in ISAC Systems with RIS

Robust Beamforming Design for UAV Communications Based on Integrated Sensing and Communication

Symbiotic Sensing and Communication: Framework and Beamforming Design