Abstract:Carbon nanotubes (CNTs) are added to the matrix according to proper distribution configurations by many researchers to improve the stiffness of laminated composites. However, the distribution configurations of CNTs may induce dramatic changes in displacements and stresses, which significantly affect structural safety. Moreover, such issues have received little attention at present because existing theoretical models encounter difficulties in accurately predicting dramatic changes in stresses of these structures. To accurately analyze the thermal expansion behaviors of laminated panels reinforced by CNTs, an equivalent single-layer higher-order model is proposed in which in-plane displacements are constructed by superimposing the second local displacements onto a smooth cubic varying field. Transverse normal deformation should be considered for the thermal expansion behavior of the laminated plate; therefore, a smooth cubic distribution along the thickness is adopted in the transverse displacement field. The layer-dependent displacement parameters can be expressed using global displacement variables by applying compatible conditions of displacements and stresses. Based on the proposed model, analytical solutions for laminated composites are obtained using Navier's technique. The capability of the proposed model is verified by comparing the results of the proposed model with the exact solutions and the three-dimensional finite element model. The effect of the distribution configuration and volume fraction of CNTs on the thermomechanical behavior of the composite panels is studied based on the present model. Numerical results show that the distribution configuration and volume fraction of the CNTs significantly influence the distributions and magnitudes of stresses. In order to improve the stiffness of aircraft wings, stiffeners are typically used to enforce the skin of the wing. However, the aerodynamic shape of the wing cannot be changed, so that the stiffeners cannot be placed on external surface of the skin. As a result, the panel's bending stiffness relative to the midplane is not asymmetric, which affected its loading capability. To overcome such problems, previous studies have demonstrated that adding CNTs can improve the stiffness of panels, and it has been found that composite panels reinforced with X-X-distributing CNTs possess the best capability in preventing buckling deformation. However, the effect of the distribution profiles of CNTs on the thermomechanical behavior has been less studied in the existing literature. Therefore, this study proposes a higher-order model to accurately predict the thermomechanical behavior of CNT-reinforced composite panels and investigate the effect of CNT distribution profiles and volume fractions on the thermomechanical responses of composite panels. The present work can provide suggestions for the design of a reinforcing scheme for CNT-reinforced composite panels, so that the stiffness of wings can be enhanced.

A strategy resisting wrinkling of sandwich structures reinforced using functionally-graded carbon nanotubes

Buckling and Wrinkling of Sandwich Structures Reinforced by Functionally Graded Carbon Nanotubes

Thermal expansion behaviors of sandwich structures reinforced by carbon nanotubes using an improved higher-order model

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

An enhanced higher-order finite element formulation for wrinkling analysis of thick sandwich plates

Buckling analysis of sandwich plates reinforced with various loading of multi-walled carbon nanotubes

Designing a Stiffener Layout That Resists the Wrinkling Behaviors of Sandwich Panels

Free Vibration Analysis of CNT Reinforced Plates Using Higher Order Shear Deformation Theory

An energy method for buckling behavior analysis of functionally graded carbon nanotube-reinforced composite sandwich structures

Bending analysis of CNT-reinforced sandwich plates using non-polynomial zigzag theory based on secant function

An Enhanced Global–Local Higher-Order Model for Thermal Expansion Analysis of Laminated Panels Reinforced by Carbon Nanotubes

Experimental and theoretical results for bending and buckling of a five-layer sandwich plate reinforced by carbon nanotubes/carbon nanorods/graphene platelets/shape memory alloy based on RFSDT

Finite Element Analysis of Sandwich Overall Buckling and Wrinkling

Indentation of sandwich beams: Comparison of Vlasov, Winkler, and shear theories with composite surfaces reinforced by CNTs and ANN model

Application of higher-order structural theory to bending and free vibration analysis of sandwich plates with CNT reinforced composite facesheets

Buckling Analysis of CNT Reinforced Functionally Graded Laminated Composite Plates

Mechanical Behavior and Failure of Carbon Fiber-Reinforced Composite Sandwich Structure Inspired by Curved-Crease Origami

Meshless Modeling of Geometrically Nonlinear Behavior of CNT-reinforced Functionally Graded Composite Laminated Plates

Buckling and post-buckling of anisogrid lattice-core sandwich plates with nanocomposite skins

Vibration Analysis of Sandwich Plates with Carbon Nanotube-Reinforced Composite Face-Sheets

An element-free analysis of CNT-reinforced composite plates with column supports and elastically restrained edges under large deformation