Abstract:The concentration conditions for the deposition of lead sulfide and hydroxide in a citrate-ammonia reaction system by varying the pH value and the concentration of the ammonium iodide dopant are calculated. Kinetic studies of the process of conversion of lead salt into sulfide by varying the concentration of NH4I in solution within the range of 0.0-0.4 M show an inhibitory effect of ammonium iodide, which reduces the constant of the effective rate of the conversion process by almost 20 times. Thin films of lead sulfide with a thickness of 100 to 650 nm are synthesized by chemical bath deposition in the presence of NH4I on sitall and glass substrates. The introduction of NH4I into the reaction mixture decreases the size of crystallites forming the films and increases the fraction of nanoparticles to 17%. The films deposited during 90 min contain 48.5-51.7 at% of lead, 47.4-47.9 at% of sulfur, and up to 3.7 at% of iodine; the content of iodine can reach 17.1 at% in the initial period of deposition (after 20 min of deposition). The calculated fractal dimension of the surface of the iodine-doped PbS(I) films (Dc = 2.04-2.14) corresponds to the process of film formation by the cluster-cluster aggregation mechanism with small sticking probability (reaction-limited cluster aggregation model (RLCA)). According to the X-ray diffraction data, the PbS(I) films have a cubic structure of the NaCl (B1) type; an increase in the concentration of NH4I in the solution results in an increase in the lattice parameter from 0.59315(1) to 0.59442(3) nm, which is probably due to the substitution of sulfur ions for iodine ones. According to optical studies, the introduction of ammonium iodide into the reaction mixture leads to a shift of the absorption edge to the high-energy region and the appearance of an additional (impurity) band. The PbS films deposited in the presence of NH4I do not require additional photosensitization operations and show a relatively high volt-watt sensitivity to IR radiation at anomalously small values of the time constant.

The Effect of Lewis Acid-Base Additive on lead-free Cs 2 SnI 6 thin film prepared by direct solution coating process

The Fabrication of Lead‐Free Cs2SnI6 Perovskite Films Using Iodine‐Rich Strategy for Optoelectronic Applications

Fabrication and Characterization of Lead‐free Cs2SnI6 Perovskite Films for Photovoltaic Applications

A feasible process for lead-free Cs<sub>2</sub>SnI<sub>6</sub> films using vapor-assisted deposition method with Sn and I<sub>2</sub> powders as reactants

Fabrication and characterization of lead‐free Cs 2 SnI 6 perovskite films for photovoltaic applications

A Feasible Process for Lead-Free Cs2SnI6 Films Using Vapor-Assisted Deposition Method with Sn and I2 Powders As Reactants

Ultrasmall Blueshift of Near-Infrared Fluorescence in Phase-Stable Cs2SnI6 Thin Films

Thiourea with sulfur-donor as an effective additive for enhanced performance of lead-free double perovskite photovoltaic cells

Uniform Cs2SnI6 Thin Films for Lead-Free and Stable Perovskite Optoelectronics via Hybrid Deposition Approaches

Effect of Monovalent Metal Iodide Additives on the Optoelectric Properties of Two-Dimensional Sn-Based Perovskite Films

Tuning Solvent Co-ordination in Cs2SnI6 Perovskite Solution via Co-Solvent Dilution Strategy for Energy-Efficient Broadband Photodetector Arrays

Ligand-mediated synthesis of colloidal Cs2SnI6 three-dimensional nanocrystals and two-dimensional nanoplatelets

The optoelectronic properties improvement of double perovskites Cs2SnI6 by anionic doping (F−)

Lead-Free Double Perovskite Cs2 SnX6 : Facile Solution Synthesis and Excellent Stability

Exploring the synthesis, structure, and optoelectronic properties of lead-free halide perovskite Cs3Bi2I9 in single crystal and polycrystalline forms

Lead‐Free Cs 2 SnI 6 Perovskites for Optoelectronic Applications: Recent Developments and Perspectives

Optoelectronic Properties Improvement of Double Perovskites Cs2Sn(Pb)I6 by the Hydrothermal Method

The influence of iodide addition on the composition, morphology, crystal structure, and semiconductor and photoelectric properties of PbS films

Enhanced Stability of Lead-Free Perovskite Heterojunction for Photovoltaic Applications

Lead‐Free Cs2SnI6 Perovskites for Optoelectronic Applications: Recent Developments and Perspectives

Antisolvent‐Free Heterogenous Nucleation Enabled by Employing 4‐Tert‐Butyl Pyridine Additive and Two‐Step Annealing for Efficient CsPbI2Br Perovskite Solar Cells