Abstract:This paper studies the transmit energy beamforming in a multi-antenna wireless power transfer (WPT) system, in which an access point (AP) equipped with a uniform linear array (ULA) sends radio signals to wirelessly charge multiple single-antenna energy receivers (ERs). Different from conventional energy beamforming designs that require the AP to acquire the channel state information (CSI) via training and feedback, we propose a new training-free energy beamforming approach assisted by wireless radar sensing, which is implemented based on the following two-stage protocol. In the first stage, the AP performs wireless radar sensing to estimate the path gain and angle parameters of the ERs for constructing the corresponding CSI. In the second stage, the AP implements the transmit energy beamforming based on the constructed CSI to efficiently charge these ERs in a fair manner. Under this setup, first, we jointly optimize the sensing beamformers and duration in the first stage to minimize the sensing duration, while ensuring a given accuracy threshold for parameters estimation subject to the maximum transmit power constraint at the AP. Next, we optimize the energy beamformers in the second stage to maximize the minimum harvested energy by all ERs. In this approach, the estimation accuracy threshold for the first stage is properly designed to balance the resource allocation between the two stages for optimizing the ultimate energy harvesting performance. Finally, numerical results show that the proposed training-free energy beamforming design performs close to the performance upper bound with perfect CSI, and outperforms the benchmark schemes without such joint optimization and that with isotropic transmission.

A scalable wireless power transmission system and its target tracking beaming using a direction of arrival estimator

Design and Implementation of 5.8GHz RF Wireless PowerTransfer System

Basic Principles of Point-to-Point Omnidirectional Wireless Power Transfer System

A 24-Ghz Beam-Steerable Multinode Wireless Power Transfer System with a Maximum DC Output of 5.7 Dbm at 1-M Distance

High-Efficiency 2-D Multibeam Rectenna Based on Gain Enhanced Patch Array

Dual-Band RF Wireless Power Transfer System with a Shared-Aperture Dual-Band Tx Array Antenna

Distributed Beamforming Based Wireless Power Transfer: Analysis and Realization

Automatic Receiver Tracking and Power Channeling for Multi-Transmitter Wireless Power Transfer

Highly Efficient Wideband mmWave Rectennas for Wireless Power Transfer System with Low-Cost Multi-Node Tracking Capability

A Study on the Optimal Magnetic Beam Forming of Coil Arrays for Long Distance Wireless Power Transmission

Training-Free Energy Beamforming Assisted by Wireless Sensing

Near-Field Wireless Power Transfer with Dynamic Metasurface Antennas

Controlling the Wireless Power Transfer Mechanism of the Both-Sides Retrodirective System

Sensing-assisted Near-field Energy Beam Focusing with ELAA Over Non-stationary Channels

A 5.8-GHz Phased Array System Using Power-Variable Phase-Controlled Magnetrons for Wireless Power Transfer

Auto-Tracking Time Reversal Wireless Power Transfer System With a Low-Profile Planar RF-Channel Cascaded Transmitter

Optimal Design of Multi-Target Wireless Power Transmission with Arbitrary Received Power Allocation

Time Division Wireless Power Transfer Using Receiver Grouping

Wireless Power Transfer with Distributed Antennas: System Design, Prototype, and Experiments

Adaptively Directional Wireless Power Transfer for Large-scale Sensor Networks

Maximum Power Tracking for Magnetic Field Editing-Based Omnidirectional Wireless Power Transfer