Abstract:The phenomena of gas hydrate plugging constitute a well known problem in the petroleum production and transport industries. Nevertheless, this issue is still not fully understood, especially for high water cut systems. For mature petroleum fields the amount of water produced increases, which results in increased risk of gas hydrate plug formation in pipelines. From previous work, it is not clear which mechanism is the most dominant for hydrate plug formation in water dominated pipeline systems: increased hydrate slurry viscosity or deposition on the pipeline wall. Knowledge of the mechanism leading to plugging is crucial to obtain efficient and economical risk management strategies for preventing pipeline plugging in such systems in the future. Computational fluid dynamics (CFD) with the discrete element method (DEM), which is an extension of the Lagrangian modelling methodology, was used to examine the flow of gas, hydrates and water in a pipeline. There is a lack of knowledge regarding interactions forces for naturally occurring gas hydrates in previous numerical works. These are key parameters when investigating hydrate agglomeration and deposition. The hydrate-hydrate cohesion force and the hydrate-wall adhesion force have been found from empirical estimates for model hydrates or regarded as unknown in earlier works. The first part of this thesis therefore focuses on finding better estimates for naturally occurring hydrate interaction from experimental findings. By numerical simulations, the corresponding work of cohesion between hydrate particles was found to be Wcoh = 7.0 mJ/m2 and the corresponding work of adhesion to the steel wall material was found to be Wadh = 0.8 mJ/m 2. Furthermore, two different two-dimensional flow systems for investigating the flow were simulated, the fist simulates a stirred tank system, referred to as case 1 and and the second a industrial pipe, referred to as case 2. In case 1, hydrates accumulated at the upper part of the pipe, close to the gas-water interphase, and agglomerates of a wide range of sizes were formed. In case 2, a major hydrate agglomerate was formed in the middle of the pipe. No particle deposition was observed in the simulations due to the shear force from the water phase being too high to allow the particles to adhere to the wall. According to these results, the most probable main mechanism for hydrate plugging in the water phase seems to be hydrate bed formation increasing the hydrate-water slurry viscosity.

New insights into the deposition of nature gas hydrate on pipeline surfaces: A molecular dynamics simulation study

Numerical Investigation of Natural Gas Hydrate Agglomeration and Deposition in High Water Cut Pipeline Systems

Influence of pipeline steel surface on the thermal stability of methane hydrate

Unraveling Adhesion Strength between Gas Hydrate and Solid Surfaces

Molecular Dynamics Simulation of Methane Hydrate Formation on Pipeline Surface in the Presence of Corrosion Inhibitors

Evolution Process of Natural Gas Hydrate Deposits in Water-Dominated Systems

Hydrate aggregation in oil-gas pipelines: Unraveling the dual role of asphalt and water

Molecular Mechanism for Methane Hydrate Nucleation on Corroded Iron Surface

Investigation on the Influence of Different Coating Surfaces on the Adhesive Force of Hydrate Particles

Investigation on coupling deposition and plugging of hydrate and wax in gas–liquid annular flow: Experiments and mechanism

Analysis of sensitivity to hydrate blockage risk in natural gas gathering pipeline

Microscopic Influence Mechanisms of Pre-Adsorbed Polysaccharide on the Nucleation and Growth of Methane Hydrate on Metal Surface

Reduction Clathrate Hydrates Growth Rates and Adhesion Forces on Surfaces of Inorganic or Polymer Coatings

The Adhesion Strength of Semi-Clathrate Hydrate to Different Solid Surfaces

Crystal Growth of CO2–CH4 Hydrate on a Solid Surface with Varying Wettability in the Presence of PVCap

Investigation Of Gas Hydrate Formation And Inhibition In Oil-Water System Containing Model Asphaltene

Mechanisms of gas hydrate formation and inhibition

Simulation of the Effect of Hydrate Adhesion Properties on Flow Safety in Solid Fluidization Exploitation

An improved model for predicting hydrate formation and deposition in horizontal annular flow

Environmentally Friendly Antiagglomerants: A Promising Solution for Gas Hydrate Plugging and Corrosion Risk Management in Oil and Gas Pipelines

Dynamics of Hydrate Formation and Deposition under Pseudo Multiphase Flow