Abstract:Cold radial forging (CRF) is recognized as one of the most effective manufacturing processes for the production of hollow components. Nonetheless, even minor alterations in the alloy composition during the cold deformation processing phase can significantly influence the material's manufacturability. This study addresses the challenges associated with high optimization costs, complex data acquisition, and the prediction of forming quality when integrating multiple processes, such as heat treatment and material composition. We propose the development of an intelligent predictive model aimed at forecasting the forming quality of the 20CrMnTiH alloy during CRF, utilizing a back-propagation neural network optimized by genetic algorithm (GA-BP). The assessment of forming quality is based on parameters such as damage, residual stress, and equivalent strain. The study investigates the impact of alloy composition and spheroidal annealing (SA) process parameters on forming quality. The performance of the three GA-BP prediction models is superior in terms of the coefficient of determination ( R 2 ) and mean square error (MSE), when compared to a conventional BP neural network and four other machine learning techniques, including gradient-boosted decision trees, random forests, support vector regression, and logistic regression. A comprehensive comparative analysis of the evaluation metrics across all three prediction models, alongside multi-objective optimization, indicates that the Pareto solution set generated by NSGA-II exhibits optimal distribution uniformity. The optimized process parameters (0.17%C-0.24%Si-0.81%Mn-0.03%P-0.03%S-1.15%Cr-0.05%Ni-0.06%Ti, T e : 60°C, AT i : 4.57 h) resulted in a reduction of residual stresses by 12%, equivalent strain by 15%, and component damage by 30%. The results demonstrate that the methodology proposed in this paper not only enhances the quality of CRF molding but also significantly improves the accuracy of the predictive model for forming quality.

Towards microstructure control in forging and rolling: combining AI with process models for closed-loop property control

DeepForge: Leveraging AI for Microstructural Control in Metal Forming via Model Predictive Control

Coupling of an analytical rolling model and reinforcement learning to design pass schedules: towards properties controlled hot rolling

Using Deep Reinforcement Learning for Zero Defect Smart Forging

The Coupling Machine Learning for Microstructural Evolution and Rolling Force During Hot Strip Rolling of Steels

Optimal data-driven control of manufacturing processes using reinforcement learning: an application to wire arc additive manufacturing

A reinforcement learning approach for process parameter optimization in additive manufacturing

Prediction of Microstructural Evolution During Hot Forging

Adaptive Pass Scheduling for Roughness Control in Cold Rolling

Computer Modeling of Property-controlled Forging Process for Heavy Forgings

Advances in Microstructure Control during Isothermal Forming of Ti-Alloy Large Complex Components by Near-β Local Forging

Robust Parameters Control Methodology of Microstructure for Heavy Forgings Based on Taguchi Method

A Reinforcement Learning Control in Hot Stamping for Cycle Time Optimization

Modeling and Simulation of Austenite Grain Evolution for Heavy Forging Steel 30cr2ni4mov Undergoing Hot Deformation

A New Method for Controlling Billet Temperature During Isothermal Die Forging of a Complex Superalloy Casing

Numerical Prediction on Microstructure Evolution for Multi-Stage Hot Forging of Micro-Alloyed Piston

Intelligent optimization of cold radial forging process for 20CrMnTiH alloy based on GA-BP and performance analysis

Multi-Scale Modeling of Microstructure Evolution during Multi-Pass Hot-Rolling and Cooling Process

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts

A novel intelligent method for slab front-end bending control in hot rolling

Multi-Objective Optimization of Forging Process to Control the Microstructure and Damage of Material