Abstract:Silicon has a high potential to replace commercial graphite anodes in lithium-ion batteries (LiBs). It can facilitate achieving excellent energy densities because of its high theoretical specific lithiation capacity (Chan et al. 2008). However, major challenges such as rapid capacity fading and low Coulombic efficiency due to the huge volume change (∼300 %) during cycling have seriously hindered its commercialization (Wu et al. 2013). Although nanostructuring has been successful in minimizing volume expansion issues, the electrochemical performance of nano-sized silicon is still limited due to unstable solid-electrolyte interphase, low coating density and overall poor electrical properties due to the higher interparticle resistance (Liu et al. 2014). To tackle those challenges, here we introduce a new concept of post-synthesis spray drying to produce hierarchically structured micro-agglomerates from silicon/carbon (Si/C) composite nanoaggregates synthesized in the gas phase (Amin et al. 2023; Adil Amin et al.). The resulting agglomerates were characterized i) on the powder level by scanning electron microscopy (Fig. 1a) and N 2 sorption, ii) on the dispersion level by rheometry and analytical centrifugation, iii) on the electrode level by atomic force microscopy for structure and iv) via electrochemical testing on half-cells for electrochemical performance (Fig. 1b). These results show that electrodes from Si/C supraparticles with the highest concentration of stabilizer exhibit better redispersion stability and excellent first cycle specific discharge capacity as well as better cycling stability as compared to the Si/C composite nanoaggregates (4 wt.% carbon content). Furthermore, compared to the reference electrodes made of nanoaggregates, the more stable supraparticles (3 wt.% stabilizer) showed the highest first Coulombic efficiency. This is due to the reduction of their surface to volume ratio which helps in forming less volume of solid electrolyte interface. To conclude, our investigation suggests how an established industrial process (gas phase synthesis of nanoparticle in a hot-wall reactor) can be combined with scalable one-step spray drying to get dense active materials for LiBs. This enables to fully utilize the new materials’ potential by the right packaging into optimum electrode structures with high performance and longevity. Furthermore, we are of the opinion that this pioneering method can be utilized as a broadly relevant design principle to enhance other (anode) materials that encounter analogous problems of volume expansion. Publication bibliography Amin, Adil; Özcan, Fatih; Loewenich, Moritz; Kilian, Stefan O.; Wiggers, Hartmut; Segets, Doris; Wassmer, Theresa; Bade, Stefan; Lyubina, Julia: Hierarchically Structured Si/C Agglomerates by Spray-Drying. Patent no. PCT / EP 2022/ 052453. Amin, Adil; Loewenich, Moritz; Kilian, Stefan O.; Wassmer, Theresa; Bade, Stefan; Lyubina, Julia et al. (2023): One-Step Non-Reactive Spray Drying Approach to Produce Silicon/Carbon Composite-Based Hierarchically Structured Supraparticles for Lithium-Ion Battery Anodes. In J. Electrochem. Soc. 170 (2), p. 20523. DOI: 10.1149/1945-7111/acb66b. Chan, Candace K.; Peng, Hailin; Liu, Gao; McIlwrath, Kevin; Zhang, Xiao Feng; Huggins, Robert A.; Cui, Yi (2008): High-performance lithium battery anodes using silicon nanowires. In Nature nanotechnology 3 (1), pp. 31–35. DOI: 10.1038/nnano.2007.411. Liu, Nian; Lu, Zhenda; Zhao, Jie; McDowell, Matthew T.; Lee, Hyun-Wook; Zhao, Wenting; Cui, Yi (2014): A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes. In Nature nanotechnology 9 (3), pp. 187–192. DOI: 10.1038/nnano.2014.6. Wu, Hui; Yu, Guihua; Pan, Lijia; Liu, Nian; McDowell, Matthew T.; Bao, Zhenan; Cui, Yi (2013): Stable Li-ion battery anodes by in-situ polymerization of conducting hydrogel to conformally coat silicon nanoparticles. In Nature communications 4, p. 1943. DOI: 10.1038/ncomms2941. Figure 1

Liquid Metal Remedies Silicon Microparticulates Toward Highly Stable and Superior Volumetric Lithium Storage

Dispersion-strengthened microparticle silicon composite with high anti-pulverization capability for Li-ion batteries

Cross-linking chemistry enables robust conductive polymeric network for high-performance silicon microparticle anodes in lithium-ion batteries

A New Approach to Synthesis Micrometer-Sized Porous Silicon Anode for Lithium Ion Batteries

Inorganic Filler Enhanced Formation of Stable Inorganic‐Rich Solid Electrolyte Interphase for High Performance Lithium Metal Batteries

Fluorinated Solvent‐Coupled Anion‐Derived Interphase to Stabilize Silicon Microparticle Anodes for High‐Energy‐Density Batteries

Spontaneous repairing liquid metal/Si nanocomposite as a smart conductive-additive-free anode for lithium-ion battery

Enabling robust structural and interfacial stability of micron-Si anode toward high-performance liquid and solid-state lithium-ion batteries

Mixed Electronic-Ionic Conductive Polymer Binder for Silicon-Based Solid-State Battery

Revival of Microparticular Silicon for Superior Lithium Storage

Liquid metal as an efficient protective layer for lithium metal anodes in all‐solid‐state batteries

Nonfilling carbon coating of porous silicon micrometer-sized particles for high-performance lithium battery anodes.

Assembled MXene-Liquid Metal Cages on Silicon Microparticles as Self-Healing Battery Anodes

Silicon Nanoparticles with a Polymer-Derived Carbon Shell for Improved Lithium-Ion Batteries: Investigation into Volume Expansion, Gas Evolution, and Particle Fracture

Scalable synthesis of micrometer-sized porous silicon/carbon composites for high-stability lithium-ion battery anodes

Manipulating charge-transfer kinetics and flow-domain LiF-rich interphase to enable high-performance microsized silicon-silver-carbon composite anode for solid-state batteries

Towards a Higher Energy Density for Lithium-Ion Battery Anodes Via Hierarchically Structured Silicon/Carbon Supraparticles Using Spray Drying

Enabling the Transport Dynamics and Interfacial Stability of Porous Si Anode Via Rigid and Flexible Carbon Encapsulation for High-Energy Lithium Storage

Robust 3D Network binder for Stable and High‐Performance Si‐Based Lithium‐Ion Battery Anodes

Tailored Hierarchical Silicon Microparticles with Copper/Carbon Layers for High Cycling Stability Lithium-Ion Storage

Yolk-shell Silicon-Mesoporous Carbon Anode with Compact Solid Electrolyte Interphase Film for Superior Lithium-Ion Batteries