Abstract:I/II/III mixed mode fractures of intersecting joint fissures often occur in natural rock masses, and jointed rock masses are prone to rockbursts in deep underground engineering when subjected to long-term crustal stresses. However, most studies of the mechanical mechanisms of these intersected joints have been conducted by simplifying two-dimensional joint model tests. Furthermore, the fracture mechanisms of two-dimensional intersected joints under tension and compression are completely different from those of three-dimensional joints. This paper presents a novel prefabricated specimen with combinations of intersecting joints capable of detecting the failure behaviours of rock I/II/III mixed mode fractures under creep loading. Uniaxial compression and multistage creep tests are performed on prefabricated sandstone specimens with intersecting joints of 0°/0°, 0°/30°, 0°/60°, and 0°/90°. The experimental results show that with the increase in the number of prefabricated intersecting joints, the uniaxial compressive strength and elastic modulus values of the sandstone specimens gradually decrease. In addition, the sandstone specimens experience relatively few AE events and minor axial strain variations in the first creep stage and the second creep stage of the multistage creep test. The axial strain increases sharply due to the sharp increase in the number of AE events in the third creep stage. The 0°/60° sandstone specimen undergoes accelerated creep failure, resulting in mixed X-shaped tensile‒shear rupture. The RA value is high based on the quantification of the creeping cracks using the acoustic emission parameters of the rise angle (RA) and average frequency (AF). The AF values of the 0°/0°, 0°/30°, and 0°/90° sandstone specimens are high. The experimental results show that a larger joint intersection angle leads to greater mutual restraints and greater effects of prefabricated crack propagation in the rock specimens, thus increasing the final failure strength. Finally, based on the acoustic emission count, a characteristic variable D suitable for characterizing the creep damage evolution of a joint rock mass is established. The findings of this paper can facilitate an effective understanding of the creep effect of I/II/III mixed mode fracture and its micromechanism. The research results will have a certain reference value for the detection and risk mitigation of instantaneous and time-delayed rockbursts.

Study on the creep properties and fracture behavior of three different rock types with a single preexisting fissure

Experimental Study on the Mechanical Characteristics of Single-Fissure Sandstone Under Triaxial Extension

Experimental and numerical study on the mechanical behaviors and crack propagation of sandstone containing two parallel fissures

Failure modes and mechanical properties of double-layer rock-like composite specimens with a single fissure under triaxial compression

Experimental and numerical simulation study of crack coalescence modes and microcrack propagation law of fissured sandstone under uniaxial compression

Experimental Study on Dynamic Tensile Mechanical Behavior and Fracture Mechanical Characteristics of Sandstone with a Single Prefabricated Fissure

Experimental study on the failure behaviors of sandstone specimens with two fissures under triaxial loading and unloading conditions

Experimental study on I/II/III mixed mode fracture characteristics of a combined rock mass under creep loading

Experimental investigation on mechanical, acoustic, and fracture behaviors and the energy evolution of sandstone containing non-penetrating horizontal fissures

An experimental investigation on the failure behavior of sandstone with filled fissure under triaxial multilevel cyclic loading

An experimental study on failure mechanical behavior and cracking mechanism of rectangular solid sandstone containing two non-coplanar fissures under conventional triaxial compression

Experimental Study on Shear Stress-Displacement, Creep and Shear Slip Instability Behavior of Rock Fractures

Triaxial Creep Mechanical Behaviors and Creep Damage Model of Dolomitic Limestone Material under Multi-Stage Incremental Loading

Progressive failure characteristics and water-induced deterioration mechanism of fissured sandstone under water–rock interaction

A synthetic study of cracking behavior and fracture mechanism of sandstone containing two non-connected fissures under uniaxial compression

Experimental study on the mechanical and permeability behaviors of limestone under hydro-mechanical-coupled conditions

Study on Time-Dependent Fracturing Behaviour for Three Different Hard Rock Under High True Triaxial Stress

Creep Behavior of Intact and Cracked Limestone Under Multi-Level Loading and Unloading Cycles

True triaxial shear creep behaviors of sandstone under constant normal load and constant normal stiffness conditions

Mechanical properties and acoustic emission characteristics of two dissimilar layers of rock-like specimens with prefabricated parallel fissures

Study on mechanical properties and energy characteristics of carbonaceous shale with different fissure angles under dry–wet cycles