Abstract:Ordinary Portland cement (OPC) is the most common curing agent for solidification/stabilization (S/S) of fly ash (FA), however, the treatment is not efficient. This study aims to investigate the S/S of FA with the modified calcium aluminate cement (CAC) as a binder. The modified CAC was obtained by adding sodium dihydrogen phosphate (NaH 2 PO 4 ), an inorganic chemical agent, and sodium diethyl dithiocarbamate (DDTC), an organic chemical agent, into CAC. Toxicity characteristic leaching procedure and unconfined compressive strength (UCS) test were carried out to evaluate the treatment effect of the proposed binder. The sequential extraction procedure (SEP), X-ray diffraction and scanning electron microscopy (SEM) were used to study the chemical speciation , mineralogical characterization and microstructure of the solidified/stabilized FA. The treatment results of pure CAC and OPC showed that the immobilizing efficiency of CAC was much higher than that of OPC. When curing with 10% CAC and 1% DDTC, the leaching concentrations of Cd, Pb and Zn decreased to 0.06, 0.12 and 18.95 mg/L, respectively. With the combination of 10% CAC and 0.5% DDTC + 0.5% NaH 2 PO 4 , the leaching concentrations of Cd, Pb and Zn were 0.12, 0.16 and 10.21 mg/L, respectively. The regulated leaching limits can be met under both of the above combinations. The UCS of the solidified body was 3.02 MPa under the combination of CAC + NaH 2 PO 4 + DDTC, which was much higher than the 1.34 MPa of the CAC + DDTC combination. SEP shows that most unstable forms of Cd, Pb and Zn in FA were converted to stable forms after the treatment by modified CAC. The immobilization mechanisms of the proposed binder included encapsulation of heavy metals and the formation of heavy metal complexes or precipitate. The CAC hydration products, the precipitate and complexes reduced the pores in FA particles and therefore reduced the leachability of heavy metals. This study demonstrated the effectiveness of the proposed modified CAC as a binder for FA treatment. As NaH 2 PO 4 is inexpensive than DDTC, the scheme of CAC + NaH 2 PO 4 + DDTC is recommended.

The hydration and heavy metal immobilization performance of the CO 2 -active incineration fly ash-calcined clay-cement (CFC 3 ) composite low-carbon cementitious system

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Circulating Fluidized Bed Fly Ash Mixed Functional Cementitious Materials: Shrinkage Compensation of f-CaO, Autoclaved Hydration Characteristics and Environmental Performance

Effect of Mixing and Curing System on Carbon Fixation Amount and Performance of Circulating Fluidized Bed Fly Ash Cement Cementitious Material System

CO2 pretreatment of municipal solid waste incineration fly ash and its feasible use as supplementary cementitious material

Investigating the Hydration, Mechanical Properties, and Pozzolanic Activity of Cement Paste Containing Co-Combustion Fly Ash

Study on the Properties and Hydration Mechanism of Calcium Carbide Residue-Based Low-Carbon Cementitious Materials

Intermediate-calcium Based Cementitious Materials Prepared by MSWI Fly Ash and Other Solid Wastes: Hydration Characteristics and Heavy Metals Solidification Behavior

Resource Utilization of Ultrasonic Carbonated MSWI Fly Ash As Cement Aggregates: Compressive Strength, Heavy Metal Immobilization, and Environmental-Economic Analysis

Use of Municipal Solid Waste Incineration Fly Ash As a Supplementary Cementitious Material: CO2 Mineralization Coupled with Mechanochemical Pretreatment.

Solidification of Municipal Solid Waste Incineration Fly Ash Through Co-Mechanical Treatment with Circulation Fluidized Bed Combustion Fly Ash

Investigation of Low-Calcium Circulating Fluidized Bed Fly Ash on the Mechanical Strength and Microstructure of Cement-Based Material

Effect of calcium formate on the compressive strength, and hydration process of cement composite containing fly ash and slag

The mechanism of hydrating and solidifying green mine fill materials using circulating fluidized bed fly ash-slag-based agent

Solidification/Stabilization of Waste Incineration Fly Ash by Modified Calcium Aluminate Cement

Hydration Mechanisms of Alkali-Activated Cementitious Materials with Ternary Solid Waste Composition

Effect of Supercritical Carbonation on the Strength and Heavy Metal Retention of Cement-Solidified Fly Ash

Bio-modification and application of coal fly ash in cementitious composites

Utilization of coal gangue power generation industry by-product CFA in cement: Workability, rheological behavior and microstructure of blended cement paste

Optimization of Proportions and Solidification Mechanism of All-Solid Waste Cementitious Materials Based on Circulating Fluidized Bed Fly Ash, Calcium Carbide Slag, and Red Mud

Recycling of Municipal Solid Waste Incineration By-Product for Cement Composites Preparation