Abstract:The flow field around spur dike group is complex, noticeable, and widely encountered in the improving progress of urban riverways and coastlines. Detailed investigation on such flow phenomenon is necessary and of applied significance. In contrast to experimental study and field survey, the numerical simulation can provide much more details with relative low cost. Aiming to identify the appropriate Computational Fluid Dynamics (CFD) models for simulating flow around spur dike group, the flow fields around non-submerged and submerged spur dike groups, including eight spur dikes in staggered arrangement, were numerically investigated in this paper with selected CFD models and validated based on corresponding flume test, i.e., two sets of laboratory experiments and observed data collected. The numerical simulations were carried out using Finite Volume Method (FVM) and three turbulence models, i.e., standard k-ε model, Reynolds Stress Model (RSM) and Large Eddy Simulation (LES) model. In each model, the free surface boundary was implemented respectively via two approaches, i.e., rigid-lid assumption (RLA) and volume of fluid (VOF) method. The comparisons between the CFD outputs and the observed data from flume experiments show that all three turbulence models are capable to simulate the three-dimensional flow around spur dike group to certain degree. It is noticed that, with comprehensive understanding of simulation accuracy and computational time, aiming to rapidly capture the field characteristics of main flow for non-submerged spur dike group, the standard k-ε model under RLA method is recommended, while to achieve the fine simulation of spur dike field especially in backflow zone, LES model under VOF method is appropriate. For submerged spur dike group, comparing to simulation accuracy, simulation cost is not a major factor concerned and LES model based on VOF method is the most suitable one due to the overflow effect of spur dike crest and the backwater effect of spur dike body.

Numerical simulation of dike failure using a GPU-based coupled DEM-SPH model

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

Multiscale Modeling of Seepage-Induced Suffusion and Slope Failure Using a Coupled FEM–DEM Approach

SPH–DEM modeling overtopping failure of earthfill dams

Numerical Simulation for Dam-Break Flood in Hurricane-Prone Regions

Two-phase modelling of erosion and deposition process during overtopping failure of landslide dams using GPU-accelerated ED-SPH

Numerical Modeling of Dam-Break Flood Through Intricate City Layouts Including Underground Spaces Using GPU-based SPH Method

SPH-DEM Coupling Method Based on GPU and Its Application to the Landslide Tsunami. Part I: Method and Validation

An Engineering-Oriented Shallow-water Hydro-Sediment-Morphodynamic Model Using the GPU-acceleration and the Hybrid LTS/GMaTS Method

Appropriate CFD Models for Simulating Flow Around Spur Dike Group along Urban Riverways

Numerical modelling of the spatial distribution of wave overtopping water behind dikes under regular wave action using OpenFOAM

Numerical simulation of submarine landslide tsunamis based on the smoothed particle hydrodynamics model

A coupled SPH-DEM-FEM model for fluid-particle-structure interaction and a case study of Wenjia gully debris flow impact estimation

3D-SPH-DEM coupling simulation for the large deformation failure process of check dams under debris flow impact incorporating the nonlinear collision-constraint bond model

Modeling of Dike-Break Induced Flood Routing Process and Flood Risk Assessment in Detention Basins

DEM–SPH Coupling Method for Landslide Surge Based on a GPU Parallel Acceleration Technique

Three-dimensional simulations of large-scale long run-out landslides with a GPU-accelerated elasto-plastic SPH model

Numerical modeling of landslide-generated impulse waves in mountain reservoirs using a coupled DEM-SPH method

An Innovative Coupled Common-Node Discrete Element Method-Smoothed Particle Hydrodynamics Model Developed with LS-DYNA and Its Applications

Three-Dimensional Numerical Method for Simulating Large-Scale Free Water Surface by Massive Parallel Computing on a GPU

Dam Breach Simulation with the Material Point Method