Abstract:Tip clearance flow between rotating blades and the stationary casing in high-pressure turbines is very complex and is one of the most important factors influencing turbine performance. The rotor with a winglet-cavity tip is often used as an effective method to improve the loss resulting from the tip clearance flow. In this study, an aerodynamic geometric optimisation of a winglet-cavity tip was carried out in a linear unshrouded high-pressure axial turbine cascade. For the purpose of shaping the efficient winglet geometry of the rotor tip, a novel parameterisation method has been introduced in the optimisation procedure based on the computational fluid dynamics simulation and analysis. The reliability of a commercial computational fluid dynamics code with different turbulence models was first validated by contrasting with the experimental results, and the numerical total pressure loss and flow angle using the Baseline k-omega Model (BSL κ-ω model) shows a better agreement with the test data. Geometric parameterisation of blade tips along the pressure side and suction side was adopted to optimise the tip clearance flow, and an optimal winglet-cavity tip was proven to achieve lower tip leakage mass flow rate and total pressure loss than the flat tip and cavity tip. Compared to the numerical results of flat tip and cavity tip, the optimised winglet-cavity design, with the winglet along the pressure side and suction side, had lower tip leakage mass flow rate and total pressure loss. It offered a 35.7% reduction in the change ratio [Formula: see text]. In addition, the optimised winglet along pressure side and suction side, respectively, by using the parameterisation method was studied for investigating the individual effect of the pressure-side winglet and suction-side winglet on the tip clearance flow. It was found that the suction-side extension of the optimal winglet resulted in a greater reduction of aerodynamic loss and leakage mass flow than the pressure-side extension of the optimal winglet. Moreover, with the analysis based on the tip flow pattern, the numerical results show that the pressure-side winglet reduced the contraction coefficient, and the suction-side winglet reduced the aerodynamic loss effectively by decreasing the driving pressure difference near the blade tips, the leakage flow velocity, and the interaction between the leakage flow and the main flow. Overall, a better aerodynamic performance can be obtained by adopting the pressure-side and suction-side winglet-cavity simultaneously.

An Aerator Impeller Inspired by Eagle Leaf Tips for Improved Energy Efficiency

Experimental and Computational Analysis of the Impeller Angle in a Flotation Cell by PIV and CFD

Optimization of a Centrifugal Impeller on Blade Thickness Distribution to Reduce Hydro-Induced Vibration

Aerodynamic Optimisation of a Winglet-Cavity Tip in a High-Pressure Axial Turbine Cascade

A Novel Suction Side Winglet Design Method For High Pressure Turbine Rotor Tips

Effect of Meridional Shape on Performance of Axial-Flow Fan

Numerical Investigations on the Effect of Blade Tip Winglet on Leakage Flow Loss Reduction for a Zero Inlet Swirl Turbine Rotor

A Novel Suction-Side Winglet Design Philosophy for High-Pressure Turbine Rotor Tips

Design and optimization of a new tube aeration device

Experiment Study of Aerodynamic Performance for the Suction-Side and Pressure-Side Winglet-Cavity Tips in a Turbine Blade Cascade

Aerothermal optimization of a turbine rotor tip configuration based on free-form deformation approach

Leakage vortices and energy characteristics of semi-open sewage pump with various blade tip alterations

Experimental Study on the Principle of Oxygenation and Oxygenation Performance of Surface Blade Aerator

Meridional Shape Optimization of Radial Inflow Turbine Impeller

Anti-Cavitation Design of the Symmetric Leading-Edge Shape of Mixed-Flow Pump Impeller Blades

Design and optimization of super-large capacity submersible axial-flow pump impeller

Aerodynamic Optimization of Winglet-Cavity Tip in an Axial High Pressure Turbine Stage

Multi-objective Optimization Design of Aerothermal Performance for Turbine Blade Squealer Tip with Inclined Suction-Side Rim

Optimization of Rotor Tip Cavity Shapes for Mitigating Aerodynamic Tip Leakage Losses

Aerodynamic Redesign of a Centrifugal Compressor Impeller

Unsteady effects of a winglet on the performance of horizontal-axis tidal turbine