Abstract:Sodium-ion batteries (SIBs) have become the best alternative to lithium-ion batteries. However, it is difficult to meet the efficiency of SIBs using graphite. Transition-metal selenides are expected to be ideal anode materials for SIBs, but some problems still need to be solved, such as poor conductivity and volume expansion. Here, we successfully synthesized a core–shell structure 2/NC composite using as a precursor. The in situ decorated ZnSe and CoSe2 nanoparticles on the NC polyhedral framework provide a rich active site for the entire electrode. In addition, the NC can simultaneously increase the conductivity and alleviate the volume effect generated during the cycling process. The 2/NC composites exhibit excellent electrochemical performance when used in SIB anode materials. When the current density is 0.1 A g–1, the reversible capacity is 499.1 mA h g–1 after 100 cycles. When the current density is increased to 1.0 A g–1, a reversible capacity of 273.5 mA h g–1 after 4000 cycles is delivered. In addition, the 2/NC composite also exhibits superior rate performance. The sodium reaction kinetics of the 2/NC composite was analyzed to explain its outstanding electrochemical performance. These results reveal the enormous potential of 2/NC composites in building efficient SIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c02521?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02521</a>.Experimental: (a) XRD pattern of ZIF precursor; TEM images of (b) ZIF-8, (c) ZIF-67, and (d) ; SEM images of (e) ZIF-8, (f) ZIF-67, and (g) (Figure S1). (a) TEM images and EDS mapping, (b) HRTEM, (c) elemental line scan, and (d) EDS spectrum of ZnSe/NC; (e) TEM images and EDS mapping, (f) HRTEM, (g) elemental line scan, and (h) EDS spectrum of CoSe2/Nc (Figure S2). BET curves and BJH pore size distribution of (a) and (c) ZnSe/NC and (b) and (d) CoSe2 (Figure S3). CV curves of (a) CoSe2/NC and (b) ZnSe/NC and (c) the combined third cycle CV curves of ZnSe/NC, CoSe2/NC, and 2/NC; discharge–charge curves of (d) ZnSe/NC, (e) CoSe2/NC, and (f) 2/NC at a current density of 0.1 A g–1; and (g) equivalent circuit used for fitting the experimental data (Figure S4). CV curves of (a) ZnSe/NC and (d) CoSe2/NC at different scan rates; log(i) vs log(v) plots at specific peak currents of (b) ZnSe/NC and (e) CoSe2/NC; and CV curve of (c) ZnSe/NC and (f) CoSe2/NC with capacitance contribution shown in the shaded area at 0.1 mV s–1 (Figure S5). Specific surface area, total pore volume, and mean pore diameter of the as-prepared materials (Table S1). Electrochemical impedance values of three electrode materials (Table S2). Comparison of the cycle performance of these materials as anode materials of SIBs (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02521/suppl_file/sc0c02521_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Space-confined growth of Bi2Se3 nanosheets encapsulated in N-doped carbon shell lollipop-like composite for full/half potassium-ion and lithium-ion batteries

Uniform Bi3Se4 @N-doped carbon spheres as anode for superior lithium and potassium storage performance

Sn-C Bonding Riveted SnSe Nanoplates Vertically Grown on Nitrogen-Doped Carbon Nanobelts for High-Performance Sodium-Ion Battery Anodes

Yolk-shell Structured CoSe2/C Nanospheres As Multifunctional Anode Materials for Both Full/half Sodium-Ion and Full/half Potassium-Ion Batteries.

Synergistic Regulation of Polyselenide Dissolution and Na‐Ion Diffusion of Se‐Vacancy‐Rich Bismuth Selenide toward Ultrafast and Durable Sodium‐Ion Batteries

Bi/Bi3Se4 Nanoparticles Embedded in Hollow Porous Carbon Nanorod:High Rate Capability Material for Potassium-Ion Batteries

Bi 2 Se 3 @C Rod-like Architecture with Outstanding Electrochemical Properties in Lithium/Potassium-Ion Batteries

Core–Shell Co, Zn Bimetallic Selenide Embedded Nitrogen-Doped Carbon Polyhedral Frameworks Assist in Sodium-Ion Battery Ultralong Cycle

Highly Conductive Co3Se4 Embedded in N-doped 3D Interconnected Carbonaceous Networks for Enhanced Lithium and Sodium Storage

Molecular template derived ultrathin N-doped carbon layer on cobalt selenide nanobelts for durable and rapid sodium storage

Te-Doped Bi2Se3@NC Nanocomposites for High-Performance Li-Ion Battery Anodes

3D hierarchical self-supporting Bi2Se3-based anode for high-performance lithium/sodium-ion batteries

Interface and electronic structure dual-engineering on MoSe2 with multi-ion/electron transportation channels for boosted sodium-ion half/full batteries

In-situ Rooting ZnSe/N-doped Hollow Carbon Architectures As High-Rate and Long-Life Anode Materials for Half/full Sodium-Ion and Potassium-Ion Batteries

Bi3Se4 nanodots in porous carbon: A new anode candidate for fast lithium/sodium storage

2D Se‐Rich ZnSe/CoSe2@C Heterostructured Composite as Ultrastable Anodes for Alkaline‐Ion Batteries

Construction of Bimetallic Selenides Encapsulated in Nitrogen/Sulfur Co-Doped Hollow Carbon Nanospheres for High-Performance Sodium/Potassium-Ion Half/Full Batteries.

Multiscale Structural Engineering of Co0.85Se@porous Carbon Composite Enables Highly Reversible Lithium/sodium Storage

Bi nanoparticles confined in N,S co-doped carbon nanoribbons with excellent rate performance for sodium-ion batteries

Interfacial engineering enables Bi2S3@N-doped carbon nanospheres towards high performance anode for lithium-ion batteries

Multiscale structural engineering of Co 0.85 Se@porous carbon composite enables highly reversible lithium/sodium storage