Abstract:Schematic diagram of carbon fibre composite structure. The impact of carbon fiber (CF) composites sizing with graphene oxide (GO) to form brick‐and‐mortar structures on their mechanical properties and thermal conductivity has not been closely examined. This study systematically investigates the effect of GO sheet size on the interfacial properties and thermal conductivity of CF composites. Three sizes of GO—small (0.11 μm), medium (0.33 μm), and large (0.97 μm)—were used to modify CF surfaces via layer‐by‐layer self‐assembly, forming the brick‐and‐mortar structures. The mechanical properties were assessed through flexural tests, interlaminar shear strength (ILSS) tests and tensile tests, while thermal conductivity was measured using a thermal constant analyzer. The results revealed that medium‐sized GO (GO‐M) significantly enhanced the interfacial strength and toughness of the composites. This improvement is attributed to the orderly arrangement of GO‐M on the CF surface, which enhances stress transfer between the fiber and the matrix. In contrast, small‐sized GO (GO‐S) tended to scatter, resulting in less effective reinforcement, while large‐sized GO (GO‐L) exhibited stacking and agglomeration, limiting its reinforcement effectiveness. However, GO‐L provided the highest thermal conductivity due to the formation of continuous heat conduction pathways. These findings suggest that GO‐M offers a balanced improvement in mechanical properties, whereas GO‐L is more suitable for applications requiring high thermal conductivity. This work underscores the importance of selecting the appropriate GO sheet size to optimize the interfacial properties and thermal conductivity of CF composites, which is crucial for enhancing their performance in high‐end engineering applications, such as aerospace, automotive, and marine industries. Highlights Modification of CF composites by GO‐M sheets significantly improved toughness and strength. GO‐L sheets formed an effective heat transfer channel with the highest thermal conductivity. The study emphasized the critical role of selecting the appropriate GO sheet size to optimize the mechanical and thermal properties of CF composites.

Flash‐sintering behavior of the composites of 3YSZ and graphene oxide

Flash Sintering of YSZ/Al2O3 Composites: Effect of Processing and Testing Conditions

Flash sintering incubation kinetics

Flash sintering of 3YSZ and in-situ joining with 304 stainless steel using copper as an interlayer

Impact of graphene oxide lateral sizes on the mechanical and thermal properties of carbon fiber composites

Mechanism analysis of arc-induced flash sintering of 3YSZ at room temperature

Effects of processing conditions on flash sintering of commercial ZrN

Review of flash sintering: materials, mechanisms and modelling

Study on the fabrication and mechanical properties of HAp-3YSZ composites by flash sintering

A first study on the current-controlled flash sintering experiments on 3YSZ-Ni composites for SOFC anode applications

Effects of amorphous phase and yttrium on flash sintering and microstructures of ZrO2–SiO2 ceramic nanocomposites

Highly Improved Microwave Absorbing and Mechanical Properties in Cold Sintered ZnO by Incorporating Graphene Oxide

Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide

The Effect of Sintering Temperature on Graphene Oxide Reinforced Copper Matrix Composite Fabricated Through Powder Metallurgy Technique

High‐performance epoxy composites improved by uniformly dispersed and partly thermal reduced graphene oxide sheets

Flash Sintering Of 8ysz Ceramics Under Ac Field

Ultrafast high-temperature sintering (UHS) vs. conventional sintering of 3YSZ: Microstructure and properties

Gas-discharge induced flash sintering of YSZ ceramics at room temperature

The effect of graphene oxide on thermal, electrical, and mechanical properties of carbon/epoxy composites: Towards multifunctional composite material

Effect of Surface Dispersion of Fe Nanoparticles on the Room-Temperature Flash Sintering Behavior of 3YSZ

Micromechanical and tribological behavior of titanium matrix composites reinforced with graphene oxide