Abstract:Lithium sulfur (Li–S) batteries have been considered as a prospective energy storage system because of its high specific capacity of 1675 mAh/g and cheap raw material cost. Although there are still some difficulties including the migration of soluble lithium polysulfides (LiPSs) intermediates, low conductivity of sulfur, and severe volume change. Designing the stable and functional interlayer is an efficient method for enhancing the performance of Li–S batteries. This work demonstrates how Keggin polyoxometalate H3[PW12O40]∙xH2O (PW12) performs as a functional interlayer material to improve performance of Li–S batteries by applying its strong chemical anchoring and effective catalytic activity for LiPSs, as well as low redox potentials within the scope of the equilibrium potentials of the redox reactions of S. As a result, after 300 cycles at 0.5 C, the cells with PW12 interlayer demonstrate high capacity of 892.6 mAh/g, and even after 1000 cycles at 1 C, a low fading rate of only 0.048% per cycle can be obtained. More significantly, it can retain 500.3 mAh/g at 1 C after 100 cycles under sulfur loading of 4.6 mg cm−2 and E/S ratio of 5 μL/mg. Besides, we compare the different behavior characteristics of PW12, K6[P2W18O62]∙14H2O (Dawson, P2W18), and (NH4)6[P2Mo18O62]∙11H2O (Dawson, P2Mo18) as interlayer materials for Li–S batteries, a conclusion can be received that compared with Mo-containing polyoxometalates, W-containing polyoxometalates have lower redox potentials, which is beneficial for the reduction of sulfur. Our strategy provides a feasible solution for the reasonable design of polyoxometalate interlayers and offers new opportunities for high-capacity and long-life Li–S batteries.

Phosphorus doped carbon coated palygorskite interlayer and its polysulfides fixation behavior

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Phosphorus-doped Few-layer Graphite Wrapped Metallic Cobalt as Interlayer for Advanced Lithium-Sulfur Batteries

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Dual taming of polysufides by phosphorus-doped carbon for improving electrochemical performances of lithium–sulfur battery

Efficiently Immobilizing and Converting Polysulfide by a Phosphorus Doped Carbon Microtube Textile Interlayer for High-Performance Lithium-Sulfur Batteries

CoP@C with chemisorption-catalysis effect toward lithium polysulfides as multifunctional interlayer for high-performance lithium-sulfur batteries

Phosphorus Doped Hierarchical Porous Carbon Nanosheet Array As an Electrocatalyst to Enhance Polysulfides Anchoring and Conversion

Poly(ionic liquid)-Based Conductive Interlayer as an Efficient Polysulfide Adsorbent for a Highly Stable Lithium–Sulfur Battery

Sequential phosphorization and carbonization with modulated d-p orbital interactions in cobalt phosphides for enhanced polysulfide redox kinetics

Effective polysulfide adsorption and catalysis by polyoxometalate contributing to high-performance Li–S batteries

Cyclized-polyacrylonitrile modified carbon nanofiber interlayers enabling strong trapping of polysulfides in lithium-sulfur batteries

Achieving physical blocking and chemical electrocatalysis of polysulfides by using a separator coating layer in lithium–sulfur batteries

Ceric dioxide particle–incorporated carbon nanofibers as functional interlayers to inhibit the polysulfide migration

Effect of phosphorus-modified TiN mesoporous MXene interlayer as a polysulfide electrocatalyst in Li-S battery

A Praline-Like Flexible Interlayer with Highly Mounted Polysulfide Anchors for Lithium-Sulfur Batteries.

Fabrication of permselective interlayer with uniform pore structure and in-situ sulfurized Co 4 S 3 for high performance lithium sulfur battery

Crystalline-amorphous heterostructure on the phosphatized P-CoS 2 /CNT for augmenting the catalytic conversion kinetics of Li-S batteries

Cobalt-doped molybdenum sulfide as an interlayer facilitates polysulfide conversion to obtain high-performance lithium−sulfur batteries

Chemical Adsorption and Physical Confinement of Polysulfides with the Janus-faced Interlayer for High-performance Lithium-Sulfur Batteries

N-doped porous carbon@CNT nanowire as effective polysulfides adsorption-catalysis interlayer for high-performance lithium-sulfur batteries