A review on g-C 3 N 4 incorporated with organics for enhanced photocatalytic water splitting

Jinnan Liang,Xiaohong Yang,Yan Wang,Peng He,Haitao Fu,Yue Zhao,Qingchuan Zou,Xizhong An

DOI: https://doi.org/10.1039/d1ta00890k

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:g-C 3 N 4 incorporated with organics for enhanced photocatalytic water splitting.

materials science, multidisciplinary,chemistry, physical,energy & fuels

What problem does this paper attempt to address?

Recent advances on g–C3N4–based Z-scheme photocatalysts: Structural design and photocatalytic applications

Jia Jia,Qiqi Zhang,Keke Li,Yating Zhang,Enzhou Liu,Xin Li

DOI: https://doi.org/10.1016/j.ijhydene.2022.09.272

IF: 7.2

2023-01-01

International Journal of Hydrogen Energy

Abstract:Graphitic carbon nitride (g–C3N4)–based Z-scheme heterojunction photocatalysts have recently attracted numerous research attention for solar energy conversion and environmental remediation. Benefited from the features of highly effective separation and transfer rate of photocarriers, well visible light responsive ability and spatially separated redox reactive sites, g–C3N4–based Z-scheme heterostructure shows significantly enhanced photocatalytic performance. This review summarizes and highlights recent research progress in g–C3N4–based Z-scheme photocatalysts including construction of 2D-2D coupling interfaces, fabrication of hierarchical microstructures, introduction of defects and heteroatoms, design of dual Z-scheme, as well as exploration of the plasmonic and photothermal performances. Moreover, the recent photocatalytic applications advance of g-C3N4 based Z-scheme photocatalysts in the fields of water splitting, CO2 reduction and pollutant degradation were also summarized. Finally, the existing challenges and perspectives of g–C3N4–based Z-scheme photocatalyst are discussed and further bring about new opportunities for future research.

energy & fuels,electrochemistry,chemistry, physical
Recent advances on g-C3N4-based Z-scheme photocatalysts for organic pollutants removal

Chunxue Li,Hao Lu,Guixiang Ding,Qing Li,Guangfu Liao

DOI: https://doi.org/10.1039/d3cy00242j

2023-03-26

Abstract:Graphitic carbon nitride (g-C3N4)-based Z-scheme photocatalysts have achieved growing interests in organic pollution removal because of their strong light absorption capacity, abundant active sites, and outstanding photocatalytic performance. This review displays a panorama of the latest advances of g-C3N4-based Z-scheme photocatalysts for organic pollution removal. It begins with the fundamentals of g-C3N4-based Z-scheme photocatalysts. Subsequently, the characterization strategies and preparation approaches for g-C3N4-based Z-scheme photocatalysts are also illustrated. Subsequently, various typical g-C3N4-based Z-scheme photocatalysts for organic pollutants degradation are exemplified. Finally, this work also provides some new insights into the major challenges, favorable circumstances, heuristic perspectives, and future development direction.

chemistry, physical
Recent Advances in g-C3N4-Based Materials and Their Application in Energy and Environmental Sustainability

Qian Wang,Yongfei Li,Fenglin Huang,Shaofu Song,Ganggang Ai,Xin Xin,Bin Zhao,Yajun Zheng,Zhiping Zhang

DOI: https://doi.org/10.3390/molecules28010432

IF: 4.6

2023-01-04

Molecules

Abstract:Graphitic carbon nitride (g-C3N4), with facile synthesis, unique structure, high stability, and low cost, has been the hotspot in the field of photocatalysis. However, the photocatalytic performance of g-C3N4 is still unsatisfactory due to insufficient capture of visible light, low surface area, poor electronic conductivity, and fast recombination of photogenerated electron-hole pairs. Thus, different modification strategies have been developed to improve its performance. In this review, the properties and preparation methods of g-C3N4 are systematically introduced, and various modification approaches, including morphology control, elemental doping, heterojunction construction, and modification with nanomaterials, are discussed. Moreover, photocatalytic applications in energy and environmental sustainability are summarized, such as hydrogen generation, CO2 reduction, and degradation of contaminants in recent years. Finally, concluding remarks and perspectives on the challenges, and suggestions for exploiting g-C3N4-based photocatalysts are presented. This review will deepen the understanding of the state of the art of g-C3N4, including the fabrication, modification, and application in energy and environmental sustainability.

chemistry, multidisciplinary,biochemistry & molecular biology
Recent Advances in 3D G-C3n4 Composite Photocatalysts for Photocatalytic Water Splitting, Degradation of Pollutants and CO2 Reduction

Xibao Li,Jie Xiong,Xiaoming Gao,Juntong Huang,Zhijun Feng,Zhi Chen,Yongfa Zhu

DOI: https://doi.org/10.1016/j.jallcom.2019.06.185

IF: 6.2

2019-01-01

Journal of Alloys and Compounds

Abstract:Recently, g-C3N4 has exhibited excellent catalytic performances in photocatalytic water splitting for H2 and O2 generation, degradation of pollutants and CO2 reduction. However, the bulk g-C3N4 demonstrates some disadvantages such as low specific surface area, high defect density, fast recombination possibility of photogenerated electron-hole pairs, and non-recyclable characteristics, leading to low photocatalytic performance and efficiency. The three-dimensional (3D) network-like g-C3N4 composite materials constructed by nanotechnology can effectively improve the adsorption capacity, light response, structure stability and recyclability of photocatalysts, which results in a significant increase in the photocatalytic performance and utilization. It is a novel way to achieve high-efficient separation of photogenerated electron-hole pairs and improve photocatalytic activity. In this review, the recent research progresses especially the synthesis strategy of 3D g-C3N4 composite photocatalysts and their applications for photocatalytic water splitting, degradation of organic pollutants and CO2 reduction are firstly and systematically introduced and discussed. The review and prospect of 3D g-C3N4 composite materials can provide some new ideas and directions for the research and development of 3D g-C3N4 composite photocatalysts with high activity, strong adsorption, facile recyclability, and no secondary pollution.
Engineering of g-C 3 N 4 -based composites for photocatalytic and electrocatalytic water splitting: Recent progress, challenges and perspective

Xin-Lian Song,Lei Chen,Jin-Tao Ren,Li-Jiao Gao,Zhong-Yong Yuan

DOI: https://doi.org/10.1016/j.ccr.2024.215752

IF: 24.833

2024-03-03

Coordination Chemistry Reviews

Abstract:Photocatalytic and electrocatalytic water splitting are considered as fabulous approaches to produce hydrogen energy for promoting global energy transition. The g-C 3 N 4 exhibits great potential for both photocatalysis and electrocatalysis owing to the unique physiochemical properties like its suitable bandgap, tunable energy band position, outstanding structure stability, high nitrogen concentration, diverse morphologies, etc. But pure g-C 3 N 4 can only attain limited catalytic performance since it cannot satisfy the diversified requirements of the complex reactions, making it essential to develop and construct efficient g-C 3 N 4 based composites. In this review, diversified synthetic strategies of g-C 3 N 4 based composites are listed systematically and the characteristics of each strategy are discussed in detail. The design principles of g-C 3 N 4 based composites towards photocatalytic water splitting are elaborately summarized from the perspective of both half reactions and overall water splitting, which also deeply probe the relationship between structures and performances. And the development of g-C 3 N 4 based composites for electrocatalytic water splitting is comprehensively concluded with g-C 3 N 4 serving as active component and sacrificial precursor. The current challenges and opportunities of g-C 3 N 4 composites for photocatalytic/electrocatalytic water splitting are presented as well. This review will throw light on preparing outstanding g-C 3 N 4 based composites for realizing competent water splitting and other energy-related applications.

chemistry, inorganic & nuclear
Constructing Co3O4/g-C3N4 Ultra-Thin Nanosheets with Z-Scheme Charge Transfer Pathway for Efficient Photocatalytic Water Splitting

Yuan Guo,Wanqing Liu,Wei Duan,Siyu Wang,Liqun Jia,Guoqing Zhang,Baolin Zhu,Weiping Huang,Shoumin Zhang

DOI: https://doi.org/10.3390/nano11123341

IF: 5.3

2021-12-09

Nanomaterials

Abstract:Photocatalytic water splitting for hydrogen generation is a significant pathway for sustainable energy conversion and production. The photocatalysts with a Z-scheme water splitting charge transfer pathway is superior due to the good separation and migration ability of photoexcited charge carriers. Herein, Co3O4/g-C3N4 photocatalysts with Z-scheme charge transfer pathway were successfully constructed by an electrostatic interaction-annealing method. The as-prepared Co3O4/g-C3N4 ultra-thin nanosheets were tested and analyzed by XRD, EA, ICP, SEM, TEM, AFM, XPS, UV-Vis DRS, PL and photoelectrochemical measurements. Moreover, the influences of fabrication parameters on performance of Co3O4/g-C3N4 catalysts were investigated, and 0.5% Co3O4/g-C3N4 exhibited the optimal activity. Based on the characterization and catalytic performance, the Z-scheme charge transfer pathway of Co3O4/g-C3N4 was established and put forward. To further improve the catalytic performance of Co3O4/g-C3N4, 0.5% Pt was added as a co-catalyst. The obtained Pt/0.5% Co3O4/g-C3N4 was recyclable and remained the original catalytic water splitting performance within 20 h. The modification of Co3O4 and Pt improved the separation and migration of e− and h+, and induced the increased hydrogen evolution rate of g-C3N4.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Three-dimensional Porous G-C3n4 for Highly Efficient Photocatalytic Overall Water Splitting

Xianjie Chen,Run Shi,Qian Chen,Zijian Zhang,Wenjun Jiang,Yongfa Zhu,Tierui Zhang

DOI: https://doi.org/10.1016/j.nanoen.2019.03.010

IF: 17.6

2019-01-01

Nano Energy

Abstract:Herein, this work constructs a three-dimensional porous graphitic carbon nitride assembled by highly crystalline and ultrathin nanosheets (3D g-C3N4NS). 3D g-C3N4NS could directly split pure water into H-2 and O-2 with high evolution rate up to 101.4 and 49.1 mu mol g(-1) h(-1) under visible light, respectively, approximately 11.8 and 5.1 times higher than bulk g-C3N4 and g-C3N4NS. Besides, it achieves a notable apparent quantum yield of 1.4% at 420 nm, significantly superior to previously reported Pt/g-C3N4. The efficient activity of 3D g-C3N4NS is mainly attributed to its 3D interconnected open-framework, assembled by highly crystalline ultrathin nanosheet unit, provides a pathway for faster charge carrier transport. Moreover, benefitting from its 3D structure for preventing agglomeration of nanosheets, 3D g-C3N4NS is stable for more than 100 h of overall water splitting reaction.
A critical review of g-C3N4-based photocatalytic membrane for water purification

Menglu Zhang,Yu Yang,Xiaoqiang An,Li-an Hou

DOI: https://doi.org/10.1016/j.cej.2021.128663

IF: 15.1

2021-05-01

Chemical Engineering Journal

Abstract:Due to the synergistically enhanced efficiency and self-cleaning performance, photocatalytic membranes provide an energy sustainable and environment friendly approach for water purification. Constructing photocatalytic membranes with visible-light responsiveness is of great scientific and technical importance for the long-term stability of support membranes and the fully utilization of solar energy. Graphite carbon nitride (g-C3N4), a visible-light driven photocatalyst with tailorable structures and excellent stability, has emerged as an attractive material for membrane applications. Herein, in order to introduce the recent advances of this field, we present a critical review on g-C3N4-based photocatalytic membranes. We firstly summarize the tailoring strategies that can be used to improve the photocatalytic activity of g-C3N4 and facilitate the membrane processing. The fabrication and modification methods of g-C3N4-based photocatalytic membranes are discussed, with an emphasis on the critical role of carbon nanomaterials, function molecules and theoretical calculations. The fundamental contribution of modified g-C3N4 to the mechanism of organic pollutant degradation and the fouling control of composite membranes is illustrated. Finally, the perspectives for the future study and the practical applications of g-C3N4-based photocatalytic membranes are proposed.
g-C3N4-based photocatalysts for organic pollutant removal: a critical review

Yidan Luo,Yaowei Zhu,Yu Han,Huiyin Ye,Ruochen Liu,Yuanwang Lan,Mingshan Xue,Xianchuan Xie,Shuohan Yu,Longshuai Zhang,Zuozhu Yin,Bin Gao

DOI: https://doi.org/10.1007/s44246-023-00045-5

2023-04-06

Carbon Research

Abstract:Abstract With rapid global industrialization, environmental pollution has become one of the major problems of human society. Photocatalysis can be applied to solve environmental problem by using inexhaustible solar energy. As a novel two-dimensional material, graphite carbon nitride (g-C 3 N 4 ) has been widely applied in many photocatalytic reactions. However, in terms of its practical applications, g-C 3 N 4 still has limitations, including poor photoexcited charge separation, limited range of visible light absorption, and low surface areas. Hence, current research on g-C 3 N 4 mainly focuses on improving its photocatalytic performance. In this review, we summarize various methods to improve g-C 3 N 4 ’s light absorption and photo-induced charge transfer, including vacancy engineering, morphology control, heteroatom doping, and forming heterostructure. The applications of g-C 3 N 4 and its derivatives in photodegradation of organic pollutants are also discussed in detail. Finally, the challenges and future research directions of g-C 3 N 4 photocatalysts are summarized to promote their environmental applications. Graphical Abstract
Recent advances in the improvement of g-C3N4 based photocatalytic materials

Yupeng Xing,Xiaoke Wang,Shuhua Hao,Xueli Zhang,Xiao Wang,Wenxuan Ma,Gang Zhao,Xijin Xu

DOI: https://doi.org/10.1016/j.cclet.2020.11.011

IF: 9.1

2021-01-01

Chinese Chemical Letters

Abstract:g-C3N4 have been widely used in the fields of photocatalytic hydrogen production, photocatalytic degradation of dyes and oxidative degradation of toxic gases due to their excellent performance. It has attracted extensive attention in recent years due to its highly efficient photocatalytic capacity of hydrogen generation, water oxidation, carbon dioxide reduction and degradation of organic pollutants. Because of the abundant carbon and nitrogen composition of the earth, large-scale production and industrial applications of this material are possible. The modification of this material makes its performance more excellent so that this new material can obtain a steady stream of vitality. These outstanding works have become important materials and milestones on the road to mankind’s photocatalytic hydrogen production. This review will begin with the basic idea of designing, synthesizing and improving g-C3N4 based photocatalytic materials, and introduce the latest development of g-C3N4 photocatalysts in hydrogen production from four aspects of controlling the carbon/nitrogen ratio, morphology, element doping and heterojunction structure of g-C3N4 materials.

chemistry, multidisciplinary
g-C3N4-Based Heterojunction for Enhanced Photocatalytic Performance: A Review of Fabrications, Applications, and Perspectives

Junxiang Pei,Haofeng Li,Dechao Yu,Dawei Zhang

DOI: https://doi.org/10.3390/catal14110825

IF: 3.9

2024-11-23

Catalysts

Abstract:In recent years, photocatalysts have attracted wide attention in alleviating energy problems and environmental governance, among which, g-C3N4, as an ideal photocatalyst, has shown excellent application potential in achieving the sustainable development of energy. However, its photocatalytic performance needs to be further improved in some applications. Rational construction of heterostructures with two or more semiconductor materials can combine the advantages of multi-components to simultaneously improve the photo-induced charge separation, which is very conducive to improving the absorption of visible light and obtaining more efficient redox capacity. With the rapid development in photocatalysis of g-C3N4-based heterostructures, a systematic summary and prospection of performance improvement are urgent and meaningful. This review focuses on various kinds of effective methods of heterogeneous combination; as well, strategies for improving the photocatalytic performance are fully discussed. In addition, the applications in efficient photocatalytic hydrogen production, photocatalytic carbon dioxide reduction, and organic pollutant degradation are systematically demonstrated. Finally, the remaining issues and prospects of further development are proposed as a kind of guidance for g-C3N4-based heterostructures with high efficiency at photocatalysis.

chemistry, physical
Origin of the enhanced photocatalytic activity of graphitic carbon nitride nanocomposites and the effects of water constituents

Chang-Ru Zhong,Ting-Wei Lee,Jie-An Li,Yu-Heng Lai,Tae-Jun Ha,Chiaying Chen

DOI: https://doi.org/10.1016/j.carbon.2020.06.028

IF: 10.9

2020-10-01

Carbon

Abstract:A metal-free heterostructure system composed of graphitic carbon nitride (g-C3N4), reduced graphene oxide (rGO), and cyclooctasulfur (α-S) is developed as a facile route for establishing efficient photocatalysts. We aim to identify the governing factors that contributed to the photochemical performance of g-C3N4/rGO/α-S nanocomposites, which are important to advance potential applications but remain unexplored. The results indicate that the constituent ratio of each component in g-C3N4/rGO/α-S composites leads to varying surface microstructure, band alignment, and photochemical properties. The enhanced visible-light photocatalytic activity originates from an upward shift of the conduction bands toward higher energies, higher content of sp2-hybridized pyridine nitrogen in triazine rings (C=N–C), and a lower amount of hydrogen bonds. The established structural integration informs a guiding framework for the design of emerging g–C3N4–based nanocomposites. Additionally, the influence of humic acid (HA) on photocatalytic decontamination was studied and shows an overall detrimental effect on the photocatalytic activity of g-C3N4 nanocomposites. Although HA advanced the photoexcited electrons, and therefore the reactive oxygen species, as well as enhanced the adsorption of the pollutants onto g-C3N4, especially at lower pH, attenuation of oxygen transfer as a result of active site competition between oxygen and target pollutants was found.

materials science, multidisciplinary,chemistry, physical
Recent advances in g-C3N4-based direct Z-scheme photocatalysts for environmental and energy applications

Xiaoming Fu,Haibo Huang,Guogang Tang,Jingmin Zhang,Junyue Sheng,Hua Tang

DOI: https://doi.org/10.1016/j.cjsc.2024.100214

IF: 0.847

2024-01-01

Chinese journal of structural chemistry

Abstract:In the midst of the rapid advancement of photocatalysis, direct Z-scheme heterojunction photocatalysts have emerged as a powerful solution to address environmental challenges and the looming energy crisis. The precise engineering of direct Z-scheme heterojunction photocatalysts proves highly beneficial in optimizing their electronic structure, ultimately enhancing their photocatalytic performance. Notably, graphitic carbon nitride (g-C3N4) has recently gained recognition as a leading candidate for the creation of direct Z-scheme heterojunctions, owing to its favorable attributes such as a moderate band-gap (2.7 eV), high reduction potential and abundant active sites. In this review, we offer a concise overview of the fundamental principles and recent advancements in g-C3N4-based direct Z-scheme photocatalytic systems. Furthermore, we delve into the various practical applications of g-C3N4-based direct Z-scheme photocatalysts, specifically in the realms of energy conversion and environmental remediation. These applications include the removal of contaminant pollutants through photocatalytic degradation, water splitting (comprising H2-generation, O2-evolution, and overall water splitting), and CO2 reduction. Additionally, we present comprehensive characterization methods and strategies aimed at further enhancing the photocatalytic activity of g-C3N4-based direct Z-scheme photocatalytic systems. To conclude, this review offers summarizing insights and a brief discussion on future challenges and prospects pertaining to g-C3N4-based direct Z-scheme photocatalysts. We believe that this review will inspire continued exploration and foster a deeper understanding of the groundbreaking possibilities within photocatalytic activity. This also provides valuable guidance for the design and construction of innovative direct Z-scheme photocatalysts.

chemistry, inorganic & nuclear,crystallography
Efficient Photocatalytic Overall Water Splitting Induced by the Giant Internal Electric Field of a g‐C 3 N 4 /rGO/PDIP Z‐Scheme Heterojunction

Xianjie Chen,Jun Wang,Yongqiang Chai,Zijian Zhang,Yongfa Zhu

DOI: https://doi.org/10.1002/adma.202007479

IF: 29.4

2021-01-14

Advanced Materials

Abstract:A graphitic carbon nitride/rGO/perylene diimide polymer (g‐C3N4/rGO/PDIP) Z‐scheme heterojunction is successfully constructed to realize high‐flux charge transfer and efficient photocatalytic overall water splitting. A giant internal electric field in the Z‐scheme junction is built, enabling the charge separation efficiency to be enhanced dramatically by 8.5 times. Thus, g‐C3N4/rGO/PDIP presents an efficient and stable photocatalytic overall water splitting activity with H2 and O2 evolution rate of 15.80 and 7.80 µmol h−1, respectively, ≈12.1 times higher than g‐C3N4 nanosheets. Meanwhile, a notable quantum efficiency of 4.94% at 420 nm and solar‐to‐hydrogen energy‐conversion efficiency of 0.30% are achieved, prominently surpassing many reported g‐C3N4‐based photocatalysts. Briefly, this work throws light on enhancing the internal electric field by interface control to dramatically improve the photocatalytic performance.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Increasing Electron Transfer and Light Absorption in Graphited Nanocarbon-Conjugated G-C3n4 Nanosheet Heterostructure for Photocatalytic Hydrogen Evolution

Daochuan Jiang,Taotao Wang,Muqing Chen,Jinbao Wu,Pingwu Du

DOI: https://doi.org/10.1016/j.ijhydene.2022.12.337

IF: 7.2

2023-01-01

International Journal of Hydrogen Energy

Abstract:Accelerating the charge separation and transfer as well as increasing the visible light absorption is of great importance for photocatalysts to realize efficient photocatalytic hydrogen evolution via water splitting. Herein, for the first time, we fabricated in-plane graphited nanocarbon-conjugated polymeric carbon nitride (GNC-C3N4) nanosheet heterostructure photocatalyst from melamine and hexaketocyclohexane octahydrate mixture via an amino-carbonyl reaction. The incorporation of GNC into conjugate network of C3N4 can not only dramatically enhance the light harvesting but also significantly promote the charge separation and transfer by the built-in electric field and intimate interface in the coplanar GNC-C3N4 heterostructure. Accordingly, the optimal GNC-C3N4 photocatalyst demonstrates a more than 15-fold enhancement for photocatalytic hydrogen evolution from water under visible light irradiation, compared to C3N4.
Graphitic carbon nitride (g-C3N4)-based photocatalytic materials for hydrogen evolution

Rui-Han Gao,Qingmei Ge,Nan Jiang,Hang Cong,Mao Liu,Yun-Qian Zhang

DOI: https://doi.org/10.3389/fchem.2022.1048504

IF: 5.5

2022-10-26

Frontiers in Chemistry

Abstract:The semiconductors, such as TiO 2 , CdS, ZnO, BiVO 4 , graphene, produce good applications in photocatalytic water splitting for hydrogen production, and great progress have been made in the synthesis and modification of the materials. As a two-dimensional layered structure material, graphitic carbon nitride (g-C 3 N 4 ), with the unique properties of high thermostability and chemical inertness, excellent semiconductive ability, affords good potential in photocatalytic hydrogen evolution. However, the related low efficiency of g-C 3 N 4 with fast recombination rate of photogenerated charge carriers, limited visible-light absorption, and low surface area of prepared bulk g-C 3 N 4 , has called out the challenge issues to synthesize and modify novel g-C 3 N 4 -block photocatalyst. In this review, we have summarized several strategies to improve the photocatalytic performance of pristine g-C 3 N 4 such as pH, morphology control, doping with metal or non-metal elements, metal deposition, constructing a heterojunction or homojunction, dye-sensitization, and so forth. The performances for photocatalytic hydrogen evolution and possible development of g-C 3 N 4 materials are shared with the researchers interested in the relevant fields hereinto.

chemistry, multidisciplinary
A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)–Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

Amirhossein Alaghmandfard,Khashayar Ghandi

DOI: https://doi.org/10.3390/nano12020294

IF: 5.3

2022-01-17

Nanomaterials

Abstract:g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4–metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4–metal-oxide-based heterojunctions.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Polymeric Photocatalysts Based on Graphitic Carbon Nitride.

Shaowen Cao,Jingxiang Low,Jiaguo Yu,Mietek Jaroniec

DOI: https://doi.org/10.1002/adma.201500033

IF: 29.4

2015-01-01

Advanced Materials

Abstract:Semiconductor-based photocatalysis is considered to be an attractive way for solving the worldwide energy shortage and environmental pollution issues. Since the pioneering work in 2009 on graphitic carbon nitride (g-C3N4) for visible-light photocatalytic water splitting, g-C3N4 -based photocatalysis has become a very hot research topic. This review summarizes the recent progress regarding the design and preparation of g-C3N4 -based photocatalysts, including the fabrication and nanostructure design of pristine g-C3N4 , bandgap engineering through atomic-level doping and molecular-level modification, and the preparation of g-C3N4 -based semiconductor composites. Also, the photo-catalytic applications of g-C3N4 -based photocatalysts in the fields of water splitting, CO2 reduction, pollutant degradation, organic syntheses, and bacterial disinfection are reviewed, with emphasis on photocatalysis promoted by carbon materials, non-noble-metal cocatalysts, and Z-scheme heterojunctions. Finally, the concluding remarks are presented and some perspectives regarding the future development of g-C3N4 -based photocatalysts are highlighted.
Surface modification of g-C 3 N 4 for enhanced photocatalytic activity via a simple illumination in pure water

Xiwei Xu,Zhenxiong Huang,Lijuan Tan,Ziyi Zhang,Bohong Chen,Xiaohui Xia,Gang Cheng,Xiaoping Chen

DOI: https://doi.org/10.2139/ssrn.4829195

IF: 6.7

2024-07-25

Applied Surface Science

Abstract:The surface of graphitic carbon nitride (g-C 3 N 4 ) is decisive in its photocatalytic performance because the critical processes including pollutants adsorption, interfacial charge transfer, and redox reaction etc, readily take place on its surface. In this study, a novel surface functionalization strategy was developed to introduce hydroxyl groups on the surface of g-C 3 N 4 through a simple illumination modification in pure water. The specific surface area and morphology of g-C 3 N 4 did not show significant changes after light irradiation modification, but there were significant differences in the composition of surface functional groups, surface charge properties, and photocatalytic activities. A series of characterization results indicated that hydroxyl groups introduction on the surface of g-C 3 N 4 could significantly enhance surface electronegativity, accelerate photogenerated charge carriers separation and transfer, and increase O 2 •- radicals generation, thereby improving the highly selective adsorption and photocatalytic degradation performance of g-C 3 N 4 for cationic methylene blue (MB) wastewater treatment. This work provides an effective strategy for fabricating efficient g-C 3 N 4 photocatalysts for different kinds of organic wastewater treatment via simple surface modification.

materials science, coatings & films,physics, applied,chemistry, physical, condensed matter
Hydrophilic bi-functional B-doped g-C3N4 hierarchical architecture for excellent photocatalytic H2O2 production and photoelectrochemical water splitting

Yang Ding,Soumyajit Maitra,Chunhua Wang,Runtian Zheng,Meiyu Zhang,Tarek Barakat,Subhasis Roy,Jing Liu,Yu Li,Tawfique Hasan,Bao-Lian Su

DOI: https://doi.org/10.1016/j.jechem.2022.02.031

IF: 13.1

2022-07-01

Journal of Energy Chemistry

Abstract:Graphitic carbon nitride (g-C3N4) has attracted great interest in photocatalysis and photoelectrocatalysis. However, their poor hydrophilicity poses a great challenge for their applications in aqueous environment. Here, we demonstrate synthesis of a hydrophilic bi-functional hierarchical architecture by the assembly of B-doped g-C3N4 nanoplatelets. Such hierarchical B-doped g-C3N4 material enables full utilization of their highly enhanced visible light absorption and photogenerated carrier separation in aqueous medium, leading to an excellent photocatalytic H2O2 production rate of 4240.3 μM g−1 h−1, 2.84, 2.64 and 2.13 times higher than that of the bulk g-C3N4, g-C3N4 nanoplatelets and bulk B doped g-C3N4, respectively. Photoanodes based on these hierarchical architectures can generate an unprecedented photocurrent density of 1.72 mA cm−2 at 1.23 V under AM 1.5 G illumination for photoelectrochemical water splitting. This work makes a fundamental improvement towards large-scale exploitation of highly active, hydrophilic and stable metal-free g-C3N4 photocatalysts for various practical applications.

chemistry, physical,engineering, chemical, applied,energy & fuels

A review on g-C 3 N 4 incorporated with organics for enhanced photocatalytic water splitting

Recent advances on g–C3N4–based Z-scheme photocatalysts: Structural design and photocatalytic applications

Recent advances on g-C3N4-based Z-scheme photocatalysts for organic pollutants removal

Recent Advances in g-C3N4-Based Materials and Their Application in Energy and Environmental Sustainability

Recent Advances in 3D G-C3n4 Composite Photocatalysts for Photocatalytic Water Splitting, Degradation of Pollutants and CO2 Reduction

Engineering of g-C 3 N 4 -based composites for photocatalytic and electrocatalytic water splitting: Recent progress, challenges and perspective

Constructing Co3O4/g-C3N4 Ultra-Thin Nanosheets with Z-Scheme Charge Transfer Pathway for Efficient Photocatalytic Water Splitting

Three-dimensional Porous G-C3n4 for Highly Efficient Photocatalytic Overall Water Splitting

A critical review of g-C3N4-based photocatalytic membrane for water purification

g-C3N4-based photocatalysts for organic pollutant removal: a critical review

Recent advances in the improvement of g-C3N4 based photocatalytic materials

g-C3N4-Based Heterojunction for Enhanced Photocatalytic Performance: A Review of Fabrications, Applications, and Perspectives

Origin of the enhanced photocatalytic activity of graphitic carbon nitride nanocomposites and the effects of water constituents

Recent advances in g-C3N4-based direct Z-scheme photocatalysts for environmental and energy applications

Efficient Photocatalytic Overall Water Splitting Induced by the Giant Internal Electric Field of a g‐C 3 N 4 /rGO/PDIP Z‐Scheme Heterojunction

Increasing Electron Transfer and Light Absorption in Graphited Nanocarbon-Conjugated G-C3n4 Nanosheet Heterostructure for Photocatalytic Hydrogen Evolution

Graphitic carbon nitride (g-C3N4)-based photocatalytic materials for hydrogen evolution

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)–Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

Polymeric Photocatalysts Based on Graphitic Carbon Nitride.

Surface modification of g-C 3 N 4 for enhanced photocatalytic activity via a simple illumination in pure water

Hydrophilic bi-functional B-doped g-C3N4 hierarchical architecture for excellent photocatalytic H2O2 production and photoelectrochemical water splitting