Abstract:Structural health monitoring (SHM) is vital to the maintenance of civil infrastructures. For rail transit systems, early defect detection of rail tracks can effectively prevent the occurrence of severe accidents like derailment. Non-destructive testing (NDT) has been implemented in railway online and offline monitoring systems using state-of-the-art sensing technologies. Data-driven methodologies, especially machine learning, have contributed significantly to modern NDT approaches. In this paper, an efficient and robust image classification model is proposed to achieve railway status identification using ultrasonic guided waves (UGWs). Experimental studies are conducted using a hybrid sensing system consisting of a lead–zirconate–titanate (PZT) actuator and fiber Bragg grating (FBG) sensors. Comparative studies have been firstly carried out to evaluate the performance of the UGW signals obtained by FBG sensors and high-resolution acoustic emission (AE) sensors. Three different rail web conditions are considered in this research, where the rail is: (1) intact without any defect; (2) damaged with an artificial crack; and (3) damaged with a bump on the surface made of blu-tack adhesives. The signals acquired by FBG sensors and AE sensors are compared in time and frequency domains. Then the research focuses on damage detection using a convolutional neural network (CNN) with the input of RGB spectrum images of the UGW signals acquired by FBG sensors, which are calculated using Short-time Fourier Transform (STFT). The proposed image classifier achieves high accuracy in predicting each railway condition. The visualization of the classifier indicates the high efficiency of the proposed paradigm, revealing the potential of the method to be applied to mass railway monitoring systems in the future.

Natural rail fracture defect calibration using infrared thermography and edge detection

Ultrasonic Dynamic Plane Wave Imaging for High-Speed Railway Inspection

Detection of Closed Cracks on the Rail Surface in Thermography NDT

Application of eddy current testing in the quantitative evaluation of the rail cracks

Evaluation of typical rail defects by induction thermography: experimental results and procedure for data analysis during high-speed laboratory testing

Non-Destructive Characterization of Railway Materials and Components with Infrared Thermography Technique

Detection for Rail Surface Defects via Partitioned Edge Feature

A Feasibility Analysis of the Infrared Thermography Technique in Surface Crack Detection for High-Speed Rail Slab Track

Surface Crack Detection in Precasted Slab Track in High-Speed Rail via Infrared Thermography

Detection of Rail Defects Using NDT Methods

Research on the rail waist defect testing with laser-EMAT ultrasonic and signal processing

The Design of a Non-Contact Inspection System Integrated With the Time of Flight-Based Flaw Detection (TOFFD) Criterion to Investigate the Structural Integrity of the Rail Track

Testing the Spalling Defects on Rail Tread with Laser EMAT Ultrasonic

Dynamic Electromagnetic Thermography System for Rail Inspection

Analysis of the RCF crack detection phenomenon based on induction thermography

Nondestructive Testing Technologies for Rail Inspection: A Review

Experimental Study of Static and Dynamic Loading Effects on Guided Wave-Based Intelligent Monitoring of Welded Rail Joints

Simulation and Experimental Research of V-Crack Testing of Rail Surfaces Based on Laser Ultrasound

Characterization of Rolling Contact Fatigue Cracks in Rails by Eddy Current Pulsed Thermography

Image Classification-Based Defect Detection of Railway Tracks Using Fiber Bragg Grating Ultrasonic Sensors

Pulsed Air-Flow Thermography for Natural Crack Detection and Evaluation