Abstract:Ultra-short Pulse Laser (USPL) has a wide range of applications in industrial sections. Among them is the workpiece surface pre-structuring before machining to reduce the process forces and temperature. Laser pre-structuring removes a section of workpiece material and induces controlled subsurface damages, improving the achievable Material Removal Rate (MRR) and workpiece machinability. USPL pre-structuring is used in various studies to optimize the conventional machining of titanium alloys. However, there is a lack of understanding of the interaction between USPL and titanium alloys associated with the laser scanning process concerning surface morphology, material removal mechanisms and geometrical features. The present work analyses the interactions between USPL and a titanium alloy as a difficult-to-cut material. A picosecond (ps) laser with a pulse duration of 12 ps was used for material ablation of titanium samples at different average laser powers P L _ave , laser scan velocities v L , and number of pulses N p . The experimental studies were conducted in three categories of multiple pulses, single linear laser scanning and multiple linear laser scanning. For multiple pulses, the influence of pulse energy E p on material ablation, changing surface morphology and melting formation was highlighted in a more significant role than the number of pulses. At E p > 62.5 μJ, a substantial volume of melted material at the different number of pulses could be seen. In the case of linear laser scanning, laser input energy E L _input was introduced as a parameter that includes the influence of successive pulses. In the single linear laser scanning, at laser input energy E L _input greater than 125 J/cm 2 , a tremendous rise in ablation depth was observed that corresponds to the huge melt formation on the surface of the lasered profile. At E L _input < 125 J/cm 2 , Laser-Induced Periodic Surface Structures (LIPSS) were observed and most of the lasered profile indicates considerably less or even no melting. In multiple linear laser scanning, lower scan velocities and average laser powers at constant E L _input = 3.9 J/cm 2 led to more surface degradation, a more significant rise in ablation depth with the number of laser scanning N s , deeper ablation depth, narrower lasered profile, less specific energy and MRR.

Selective Ablation and Laser-Induced Periodical Surface Structures (LIPSS) Produced on (Ni/Ti) Nano Layer Thin Film with Ultra-Short Laser Pulses

Laser ablation and LIPSS formation at static and dynamic multi-pulse regime on protective Al2O3/TiAlN coating

Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse

Femtosecond Laser-Induced Periodic Surface Structures in Titanium-Doped Diamond-like Nanocomposite Films: Effects of the Beam Polarization Rotation

Microstructure Formations Resulting from Nanosecond and Picosecond Laser Irradiation of a Ti-Based Alloy under Controlled Atmospheric Conditions and Optimization of the Irradiation Process

Femtosecond pulse train-facilitated periodic nanostructuring on TiN films via laser-oxidation

Methodology of selective metallic thin film ablation from susceptible polymer substrate using pulsed femtosecond laser

Comprehensive ablation study of near-IR femtosecond laser action on the titanium-based alloy Ti6Al4V: morphological effects and surface structures at low and high fluences

Laser‐Induced Reversible and Irreversible Surface Nanostructuring

Tailoring Sub-micrometer Periodic Surface Structures via Ultrashort Pulsed Direct Laser Interference Patterning

Influence of working parameters on multi-shot femtosecond laser surface ablation of lithium niobate

Investigation of femtosecond laser assisted nano and microscale modifications in lithium niobate

On interaction between laser and Ti6Al4V titanium alloy

Highly Regular Hexagonally-Arranged Nanostructures on Ni-W Alloy Tapes upon Irradiation with Ultrashort UV Laser Pulses

LIPSS pattern induced by polymer surface instability for myoblast cell guidance

Electronic relaxation in PLD TiO 2 films processed with femtosecond UV-laser

Structural and Functional Picosecond Laser Modification of the Nimonic 263 Superalloy in Different Environmental Conditions and Optimization of the Irradiation Process

Structural Color Generation on Transparent and Flexible Substrates by Nanosecond Laser Induced Periodic Surface Structures

Cell response on laser-patterned Ti/Zr/Ti and Ti/Cu/Ti multi-layer systems

Colloidal Titanium Nitride Nanoparticles by Laser Ablation in Solvents for Plasmonic Applications

Processing Microstructure on Film by Femtosecond Laser