Abstract:Lithium ion-battery (LIB) technology, featuring upstanding energy and power density, satisfying lifetime, high round-trip efficiency and very fast dynamics in a reasonably economic package, rapidly became the undisputed ruler of portable power and it is now the main driver of the electrification of transportation sector. However, despite the fully commercial development, understanding and predicting degradation of such devices is still a great challenge for the scientific and technical community, especially when dealing with real-life-operation induced aging. The reusability of such devices in a circular economy perspective is a hot topic to the sector to improve sustainability, but requires understanding “how” batteries are faded rather than only “how much” they are, to enable a physically consistent and second-life-related estimation of residual lifetime. In the present activity, a detailed analysis of high-power LFP (lithium iron phosphate) cells samples operated on IVECO hybrid buses are performed to assess their possible reusability, in the frame of a joint research cooperation. A large batch of cells with different ages (from 9 years old to brand new) and different positions inside the modules are investigated. State-of-art electrochemical diagnostics are performed embedded in a multi-measurement optimized protocol (full discharge, pulse test, electrochemical impedance spectroscopy) developed after a sensitivity optimization for a model-based improved parameter identification [1], as visible in Figure 1. Residual performances are analyzed and compared with limited on-board data collected from vehicles BMS and analyzed by means of an appositely-improved physical modelling platform. Both capacity and power capabilities have sensibly decreased over the cells lifetime (see Figure 2 for the full discharges at 0.1C, 25°C) with a clear pattern attributable to cells position beneath the modules, prompting the importance of a homogeneous thermal management during operation. Power-based state of health of the samples is higher than a capacity-based SoH, foreseeing a possible reuse of the samples in a power-intensive second-life. Residual performance interestingly feature a high consistency with data recently published in [2], relative to similar system despite operated in a completely different geographic area; this strengthens the generalizability of the results. Aged cells diagnostics were interpreted with a previously developed Newman P2D physical model provided with heath exchange, to identify the degradation mechanisms through the EIS-based parameter identification procedure [1] involving both thermodynamic and kinetic aspects. Interpretation of thermodynamic aging modes has been conducted on all the tested cell samples, based on 0.1C thermodynamic analysis and the differential voltage. Incremental capacity curves of aged cells have been reproduced with a PSO-based (particle-swarm-optimization) identification of three ageing parameters: loss of lithium inventory (LLI) , mainly corresponding to solid electrolyte interphase (SEI) growth, and loss of active materials at negative (LAMn) and positive (LAMp) electrode, indicating loss of actives sites for the electrochemical reactions. Despite the severely low residual capacity, the model reproduces satisfyingly the features of the aged cells. Interestingly, a linear trend could be identified as common beneath all the samples involved in the analysis, indicating common aging mechanism appearing with different magnitude. As visible in Figure 3, the trend points out a two-steps aging path: (I) a first pathway mainly leading to LLI close to 20%, followed by (II) a second pathway with both LLI and LAMn occurring at the same time. In the literature, similar observations have been already performed by some authors in previous works, with a lower extent of degradation [3,4]. They agree in this interpretation: the first stage is usually associated to the growth of the SEI layer, while the second stage is usually associated to the onset of lithium plating (due to a dense SEI which inhibits the lithium intercalation into graphite). Confirmation of such interpretation is obtained by means of model based interpretation on non-equilibrium measurements, permitting estimation of physical parameters value and enabling identification of aging mechanisms, together with ex-situ measurements based on electrochemical and morpho chemical analyses. Additionally, several consistencies between on-line measurements, such as EIS, and equilibrium capacity loss of cells have been identified, theoretically discussed and tested under further accelerated aging tests, enabling possible strategies of SoH implementation based on fast and informative electrochemical measurements. References [1]Rabissi et al., doi.org/10.1016/j.est.2022.106435 [2] K. Ramirez-Meyers et al., doi.org/10.1016/j.est.2022.106472 [3] E. Sarasketa-Zabala et al., doi.org/10.1021/jp510071d [4] X.G. Yang et al., https://doi.org/10.1016/j.jpowsour.2017.05.110 Figure 1

Unravelling degradation mechanisms and overpotential sources in aged and non-aged batteries: A non-invasive diagnosis

Diagnosing and Decoupling the Degradation Mechanisms in Lithium Ion Cells: An Estimation Approach

Health diagnosis and recuperation of aged Li-ion batteries with data analytics and equivalent circuit modeling

Integrating Physics-Based Modeling and Machine Learning for Degradation Diagnostics of Lithium-Ion Batteries

Aging Aware Battery Operation and State of Health Evaluation in Energy Storage Systems

Physical Model-Based State of Health Understanding of Severely Aged Lithium-Ion Batteries Under Real-World Automotive Operational Life

Aging in First and Second Life of G/LFP 18650 Cells: Diagnosis and Evolution of the State of Health of the Cell and the Negative Electrode under Cycling

Non-destructive characterization techniques for battery performance and lifecycle assessment

An Arrhenius-Based Simulation Tool for Predicting Aging of Lithium Manganese Dioxide Primary Batteries in Implantable Medical Devices

Nonlinear aging characteristics of lithium-ion cells under different operational conditions

Non-destructive electrode potential and open-circuit voltage aging estimation for lithium-ion batteries

A Migration-Based Method for Non-Invasive Revelation of Microscopic Degradation Mechanisms and Health Prognosis of Lithium-Ion Batteries

Theory of battery ageing in a lithium-ion battery: Capacity fade, nonlinear ageing and lifetime prediction

Electrolyte Degradation During Aging Process of Lithium‐Ion Batteries: Mechanisms, Characterization, and Quantitative Analysis

Visualizing ageing-induced heterogeneity within large prismatic lithium-ion batteries for electric cars using diffraction radiography

The Complex and Spatially Heterogeneous Nature of Degradation in Heavily Cycled Li-ion Cells

On-Board Analysis Of Degradation Mechanisms Of Lithium-Ion Battery Using Differential Voltage Analysis

A facile physics-based model for non-destructive diagnosis of battery degradation

Quantitative Analysis of Origin of Lithium Inventory Loss and Interface Evolution over Extended Fast Charge Aging in Li Ion Batteries

Physics-Informed Machine

Quantifying Degradation Mechanisms in a High-Performance Parallel Hybrid Lithium-Ion Supercapacitor Induced by Long Term Cycling at High Current Rates