Abstract:In a coal mine, air leakage exists in some roadways through doors and other ventilation structures inevitably. Based on this opinion, there are different views on whether these roadways must be assigned airflow in coal mine ventilation design. This paper analyses some relevant regulations and criteria on the designed air quantity of coal mines. Then, based on the ventilation design of the Guizhou Yizhong Coal Mine, through the study of the calculation of needed air quantity of every working place and its distribution method in coal mine ventilation design, this paper puts forward that explosion-proof door, safety exit, and other short distance roadways with ventilation structures need not assign airflow in coal mine ventilation design, while some long-distance roadways need. Additionally, it presents the main reason to support this opinion, gives the distribution method of inner air leakage quantity, which comes with the calculation of the designed mine total air quantity, puts forward the remedy method for the air leakage through ventilation structures in a coal mine ventilation system, then offers the mine operator with the basic opinions for the day-to-day planning and effective operation of a coal mine ventilation system.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the controversy regarding the air distribution method in coal mine ventilation design, especially the question of whether air volume needs to be distributed in some roadways with ventilation structures (such as explosion - proof doors, safety exits, short - distance connecting roadways, etc.). The traditional view holds that due to the air leakage through ventilation structures, all underground roadways, including those with ventilation structures, need to be allocated air volume. However, the new view believes that most roadways with ventilation structures do not need to be allocated air volume; if some roadways do need to be allocated air volume, regulators should be set up.
Through the study of the ventilation design of Yizhong Coal Mine in Guizhou, the paper analyzes the requirements for air volume distribution in different roadways and proposes a reasonable air volume distribution method. Specifically, the paper explores the following aspects:
1. **Calculation of air volume requirements**:
- Calculate the required air volume according to the maximum number of people working underground simultaneously.
- Calculate the required air volume for each working face, development face, chamber and other roadways requiring air volume according to factors such as gas emission rate, suction volume of auxiliary fans, and explosive consumption.
- In newly - designed coal mines, the air volume of other roadways can be calculated as 3 - 5% of the total air volume.
- The maximum value multiplied by the mine ventilation coefficient (including internal air leakage and uneven air volume distribution in the mine) is the total air volume of the designed mine.
2. **Air volume distribution methods**:
- Allocate the calculated air volume to each working face, development face, chamber and other roadways requiring air volume.
- Distribute the remaining air volume to other locations requiring air volume in a certain proportion to ensure the safety of pedestrians and roadways.
3. **Comparison of different opinions**:
- The traditional method believes that all roadways with ventilation structures need to be allocated air volume.
- The new method believes that most roadways with ventilation structures do not need to be allocated air volume, and if necessary, regulators should be set up.
4. **Case study**:
- Through the analysis of the ventilation design of Yizhong Coal Mine in Guizhou, the paper puts forward some specific suggestions, such as that the auxiliary roadways of the auxiliary return air inclined shaft (such as safety exits, explosion - proof doors, spare air ducts, etc.) should not be allocated air volume in the design.
- For short - distance roadways (such as short - distance connecting roadways), if there is no gas emission and the length does not exceed 6 meters, diffusive ventilation can be used and no air volume needs to be allocated.
5. **Solutions**:
- Propose how to reasonably distribute the increase in air volume caused by the mine ventilation coefficient and how to compensate for the air leakage of ventilation structures.
- Emphasize the importance of the selection of the main fan, ensuring that the air volume of the main fan is greater than the total air volume of the designed mine to compensate for the air leakage of various ventilation structures.
Through these analyses and suggestions, the paper aims to provide guidance for mine operators in daily management and the effective operation of mine ventilation systems.