Selective recovery of strontium from oilfield water by ion-imprinted alginate microspheres modified with thioglycollic acid

Can Liu,Xiaoping Yu,Chi Ma,Yafei Guo,Tianlong Deng
DOI: https://doi.org/10.1016/j.cej.2020.128267
IF: 15.1
2021-04-01
Chemical Engineering Journal
Abstract:<p>The efficient recovery of Sr<sup>2+</sup> from brine is a great challenge due to the interference of a large number of coexisting ions. Herein, a new-type spherical Sr<sup>2+</sup> adsorbent with a diameter of about 2-3 mm was developed by the ion-imprinting method using low-cost and high hydrophilic sodium alginate (SA). It was found that although SA could be granulated in HCl solution, it showed no adsorption ability for Sr<sup>2+</sup>. However, when SA was ion-imprinted with Sr<sup>2+</sup> and then eluted with HCl, the material exhibited excellent adsorption performance. Especially, after modification with thioglycollic acid, the maximum adsorption capacity reached approximately 177 mg·g<sup>-1</sup>, which was far higher than that of the spherical materials reported at present. The Sr<sup>2+</sup> in the material could be eluted easily with 0.05 mol·L<sup>-1</sup> HCl at an eluent dosage of only 0.02 L·g<sup>-1</sup>, and the Sr<sup>2+</sup> concentration in the eluate was nearly 25 times higher than that in the original solution. Because of the ion-sieve effect, the developed adsorbent presented high stability and selectivity when used for Sr<sup>2+</sup> recovery from oilfield water. The attenuation of adsorption capacity was only 0.42% after five adsorption-desorption. The separation factors between Sr<sup>2+</sup> and other ions were all higher than 54, indicating that the selective recovery of Sr<sup>2+</sup> is almost unaffected by coexisting Na<sup>+</sup>, K<sup>+</sup>, Mg<sup>2+</sup>, and Ca<sup>2+</sup>. All these properties suggest that the proposed material has excellent properties and can be used as a candidate for selective recovery of Sr<sup>2+</sup> from oilfield water or other liquid strontium resources.</p>
engineering, chemical, environmental
What problem does this paper attempt to address?