Abstract:Orbital Angular Momentum (OAM) lasers have potential demand in many applications such as large capacity communication systems, laser processing, particle manipulation and quantum optics. OAM mode femtosecond fiber laser has become the research focus with the advantages of simple structure, low cost and high peak power. The current OAM mode femtosecond fiber lasers have made breakthroughs in the repetition frequency, pulse width, spectrum width and other key parameters, but it is difficult to achieve good overall performance. Besides, the repetition rate is currently in tens of MHz. In this paper, a large-bandwidth mode coupler is made based on the mode phase matching principle. Among them, the first order mode coupler with 3dB polarization dependent loss is made by the technology of strong fused biconical taper, and the second order mode coupler with 0.3dB polarization dependent loss is made by the technology of weak fused biconical taper. Combined with the nonlinear polarization rotation mode-locking mechanism, OAM mode femtosecond fiber lasers with over 100 MHZ repetition rate are built. The achievement of the key parameters is attributed to the selection of dispersion shifted fibers that can accurately adjust intracavity dispersion. Compared to traditional dispersion compensation fibers (DCF), the group velocity dispersion is reduced by an order of magnitude, so it can better adjust intracavity dispersion to achieve the indicators of large spectral bandwidth and narrow pulse width. In addition, the diameter of the fiber is 8μm, which is the same as that of a single mode fiber. Compared to DCF, the fusion loss can be ignored, so only a shorter gain Erbium-doped fiber is required that ensure a shorter overall cavity length and achieve high repetition frequency. The experimental results show that the first order OAM mode fiber laser has 113.6 MHz repetition rate, 98 fs half-height full pulse width, and 101nm 10-dB bandwidth. Second-order OAM mode fiber laser has 114.9 MHz repetition rate, 60 fs half-height full pulse width, and 100nm 10-dB bandwidth. Compared with the reported schemes, our scheme has better performance in key parameters such as repetition rate, pulse width and spectral width. We believe that the OAM mode fiber laser with good over performance is expected to be more widely used in OAM communication, particle manipulation and other research fields.

The generation of ultrahigh repetition-rate OAM frequency combs in dual-concentric Germania-doped ring-core fiber

Multiple coherent OAM dispersive waves generation in dual concentric ring-core fiber

Dual Concentric-Ring-Core Fiber With Four Zero-Dispersion Wavelengths for Beyond Three-Octave OAM Supercontinuum Generation

Optical Frequency Comb Generation from a 1.65 Μm Single-Section Quantum Well Laser.

Emission of five OAM dispersive waves in dispersion-engineered double-ring core fiber

Beyond two-octave coherent OAM supercontinuum generation in air-core Ge-doped ring fiber

Orbital angular momentum light frequency conversion and interference with quasi-phase matching crystals

Generation of Optical Frequency Comb via Giant Optomechanical Oscillation

Broadband electro-optic frequency comb generation in an integrated microring resonator

Orbital angular momentum mode femtosecond fiber laser with over 100 MHz repetition rate

Electro-optic frequency combs carrying orbital angular momentum

GHz Figure‐9 Er‐Doped Optical Frequency Comb Based on Nested Fiber Ring Resonators

Broadband electro-optic frequency comb generation in a lithium niobate microring resonator

Robust Optical Frequency Comb Generation by Using a Three-Stage Optical Nonlinear Dynamic

Toward Generation of Mid-Infrared Orbital Angular Momentum Beams by Tailoring Four-Wave Mixing in Chalcogenide Photonic Crystal Fiber

On-demand Orbital Angular Momentum Comb from a Digital Laser

Integrated Vortex Soliton Microcombs

Propagation Characteristics of Orbital Angular Momentum Modes at 810 Nm in Step-Index Few-Mode Fibers

Self-generation of optical frequency comb in single section Quantum Dot Fabry-Perot lasers: a theoretical study

Optical frequency comb generation based on spectral broadening of a phase locked dual-wavelength microcavity laser

Optical frequency comb generation from a 1.65 µm single-section quantum well laser