Abstract:In this letter, the innate ability of nitric oxide (NO) to inhibit platelet activation/adhesion/thrombus formation is employed to improve the hemocompatibility and in vivo accuracy of an intravascular (IV) potentiometric PCO2 (partial pressure of carbon dioxide) sensor. The catheter-type sensor is fabricated by impregnating a segment of dual lumen silicone tubing with a proton ionophore, plasticizer, and lipophilic cation-exchanger. Subsequent filling of bicarbonate and strong buffer solutions and placement of Ag/AgCl reference electrode wires within each lumen, respectively, enables measurement of the membrane potential difference across the inner wall of the tube, with this potential changing as a function of the logarithm of sample PCO2. The dual lumen device is further encapsulated within a S-nitroso-N-acetyl-DL-penicillamine (SNAP)-doped silicone tube that releases physiological levels of NO. The NO releasing sensor exhibits near-Nernstian sensitivity toward PCO2 (slope = 59.31 ± 0.78 mV/decade) and low drift rates (<2 mV/24 h after initial equilibration). In vivo evaluation of the NO releasing sensors, performed in the arteries and veins of anesthetized pigs for 20 h, shows enhanced accuracy (vs non-NO releasing sensors) when benchmarked to measurements of discrete blood samples made with a commercial blood gas analyzer. The accurate, continuous monitoring of blood PCO2 levels achieved with this new IV NO releasing PCO2 sensor configuration could help better manage hospitalized patients in critical care units.This article has not yet been cited by other publications.

Enhanced Hemocompatibility and In Vivo Analytical Accuracy of Intravascular Potentiometric Carbon Dioxide Sensors via Nitric Oxide Release

A flexible and physically transient electrochemical sensor for real-time wireless nitric oxide monitoring

Rapid real-time monitoring of NO released from living cells using multi-walled carbon nanotube-7,7,8,8-tetracyanoquinonedimethyl-polylysine sensors

Real-time Monitoring of Blood Carbon Dioxide Tension by Fluorosensor

Study on the Technology of Nitric Oxide (no) Detection in Vitro and in Vivo

A flexible and highly sensitive organic electrochemical transistor-based biosensor for continuous and wireless nitric oxide detection

A cellular nitric oxide sensor based on porous hollow fiber with flow-through configuration

The dynamic detection of NO during stroke and reperfusion in vivo.

Flexible Electrochemical Fiber Sensor for Intracranial Nitric Oxide Monitoring

A nitric oxide biosensor based on the multi-assembly of hemoglobin/montmorillonite/polyvinyl alcohol at a pyrolytic graphite electrode.

Air-permeable redox mediated transcutaneous CO2 sensor

Highly Sensitive Voltammetric Biosensor for Nitric Oxide Based on Its High Affinity with Hemoglobin

A highly adsorptive electrochemical fiber sensor for real-time and accurate detection of intracranial nitric oxide

Direct Acupuncture of Nitric Oxide by an Electrochemical Microsensor with High Time-Space Resolution

Sensitive Electrochemical Detection of Nitric Oxide Release from Cardiac and Cancer Cells via a Hierarchical Nanoporous Gold Microelectrode

Nitric Oxide Biosensors Based on Hb/Phosphatidylcholine Films

Highly sensitive amperometric Pt-Nafion gas phase nitric oxide sensor: Performance and application in characterizing nitric oxide-releasing biomaterials

Ratiometric fluorescent biosensor for detection and real-time imaging of nitric oxide in mitochondria of living cells

Carbon nanotube-interconnected ruthenium phthalocyanine nanoparticles used for real-time monitoring of nitric oxide released from vascular endothelial barrier model

Nitric oxide-eluting nanocomposite for cardiovascular implants

AMPEROMETRIC NITRIC OXIDE BIOSENSOR BASED ON THE IMMOBILIZATION OF HEMOGLOBIN ON A NANOMETER-SIZED GOLD COLLOID MODIFIED AU ELECTRODE