Abstract:Due to large uncertainties embedded in their geotechnical parameters, dynamic numerical models of landslide run-out distance can only be reliably applied to conduct post-failure back analyses, rather than accurate physical-based forward predictions. Therefore, it is important to quantify these uncertainties, and their effects, to improve the reliability of predictions. This paper proposes a run-out distance prediction methodology within a probabilistic framework to assess the exceedance probability of run-out distance for an individual landslide using a depth-integrated continuum method (Massflow) and a polynomial response surface method coupled with the first-order reliability method (RSM-FORM). The input parameters (i.e., friction angle and pore pressure ratio) are considered as random variables with reasonable probability density functions. The limit state function (LSF) is established based on a given threshold value of the run-out distance. The RSM is then adopted to establish a mathematical function that approximates the real LSF; and then, based on the fitted response surface, the FORM is employed to calculate the probability of the run-out distance exceeding the given threshold value. The 2015 Shenzhen landslide is considered as an example to illustrate the proposed methodology. The results show that our proposed methodology can successfully assess the exceedance probability of the run-out distance at different locations with acceptable computational errors. In addition, the computational efficiency is significantly improved compared to conventional Monte Carlo simulations. Moreover, according to the run-out distance-exceedance probability curve, the area potentially affected by the Shenzhen landslide can be classified into five categories (i.e., extremely high, high, medium, low, and extremely low) based on the different threshold values of exceedance probability (i.e., 50%, 10%, 1%, and 0.1%). The observed deposition area of the Shenzhen landslide lies within the extremely high and high hazard zones, demonstrating the feasibility of conducting landslide hazard zoning using the exceedance probability of the run-out distance. This study thus presents a practical procedure for enhancing the probabilistic run-out distance prediction of individual landslides and provides new ideas for conducting hazard zoning.

Analysis of the runout distance and impact force of an actual landslide considering the effect of single rigid barrier using an SPH approach

SPH-based Simulation of Flow Process of a Landslide at Hongao Landfill in China

Interaction Mechanisms between Natural Debris Flow and Rigid Barrier Deflectors: A New Perspective for Rational Design and Optimal Arrangement

Influence of Solid–fluid Interaction on Impact Dynamics Against Rigid Barrier: CFD–DEM Modelling

Assessment of barrier location effect on debris flow based on smoothed particle hydrodynamics (SPH) simulation on 3D terrains

Three-dimensional run-out analysis and prediction of flow-like landslides using smoothed particle hydrodynamics

Modelling the evolution of propagation and runout from a gravel–silty clay landslide to a debris flow in Shaziba, southwestern Hubei Province, China

Numerical Investigation of Impact Characteristics of Rigid Retaining Wall for Blocking Landslides: A Case Study of the Shum Wan Road Landslide

Run-out distance exceedance probability evaluation and hazard zoning of an individual landslide

Large Scale Physical Modelling Study of a Flexible Barrier under the Impact of Granular Flows

A coupled SPH–DEM–FEM approach for modeling of debris flow impacts on flexible barriers

Large-scale physical modelling study of a flexible barrier under the impact of granular flows

3D numerical simulation of debris-flow motion using SPH method incorporating non-Newtonian fluid behavior

Numerical modeling of landslide-generated impulse waves in mountain reservoirs using a coupled DEM-SPH method

Dynamic response of rock landslides and avalanche debris flows impacting flexible barriers based on shaking table tests

Dynamics of debris flow-induced impacting onto rigid barrier with material source erosion-entrainment process

Numerical Investigation on the Barrier Dam Risk Caused by Landslide-A Case Study on Caijiaba Landslide

Modeling Near-Field Impulsive Waves Generated by Deformable Landslide Using the HBP Model Based on the SPH Method

Numerical investigation of river blocking process of Gangda paleolandslide at the upstream reaches of the Jinsha River, Tibentan Plateau

A New Insight into the Dynamic Impact Between Geophysical Flow and Rigid Barrier

Run-out of the 2015 Shenzhen Landslide Using the Material Point Method with the Softening Model