Abstract:Nickel-based single crystal superalloys (Ni-SXs) are of great interests in aircraft industry due to their excellent high temperature creep strength deriving from the rigid gamma/gamma prime (gamma/gamma') micro-structure and the single crystal nature. The creep properties of Ni-SXs depend strongly on the degradation rate of the original rigid gamma/gamma' microstructure with the dislocation movements in the microstructure. Since the applied temperature and stress strongly affect the dislocation movements, the different creep mechanisms are displayed to Ni-SXs during low temperature (similar to 750 degrees C), mid-temperature (similar to 950 degrees C) and high temperature (similar to 1100 degrees C) creep. The creep deformation during low temperature creep is mainly caused by the shearing of gamma' phase by a limited number of dislocations, while high temperature creep mainly occurs to the accumulation of creep strains with the increased dislocation activities in gamma phase. To enhance the creep properties of alloy, a variety of strategies of the microstructural optimization need to be considered. One is to increase the volume fraction of gamma' phase to enhance the precipitation strengthening effects. But excessive amounts of gamma' phase are disadvantageous to low temperature strength of alloy. The coarsening of gamma' phase and the rafting process strongly correlates to dislocation movements. It is of importance to discuss the specific mechanisms of coarsening and rafting as well as their influence to the creep properties of alloy. The lattice misfit between the gamma and gamma' phase plays an important role in influencing the coarsening of gamma' phase and the creep properties of alloy. A proper lattice misfit helps to form the cubic gamma' phase which is advantageous to alloy. But a too large lattice misfit can promote the coarsening of gamma' phase that damages the structural stability of alloy at high temperatures. The increased additions of refractory elements in alloy promote the formation of topologically close-packed (TCP) phase. TCP phase facilitates the nucleation and propagation of micro-cracks around it that damages the creep properties of alloy. This review aims to summarize some aspects of microstructural evolution during creep of alloy with considering their effects to creep properties. To guide the design of Ni-SXs in future, some perspectives about the microstructural optimization are properly provided. (C) 2019 Elsevier B.V. All rights reserved.

Fast characterization framework for creep microstructure of a nickel-based SX superalloy with high-throughput experiments and deep learning methods

Quantitative models of high temperature creep microstructure-property correlation of a nickel-based single crystal superalloy with physical and statistical features

Inconsistent creep between dendrite core and interdendritic region under different degrees of elemental inhomogeneity in nickel-based single crystal superalloys

A Phase-Field Model for Creep Behavior in Nickel-Base Single-Crystal Superalloy: Coupled with Creep Damage

In Situ SEM Study of Creep Deformation Behavior of Nickel-Based Single-Crystal Superalloys

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Study of the Creep Behavior of Nickel-Based Single Crystal Superalloy Micro Specimens with Dimensional Effects

Transfer learning enables the rapid design of single crystal superalloys with superior creep resistances at ultrahigh temperature

Microstructural evolution and creep mechanisms in Ni-based single crystal superalloys: A review

The creep deformation of a new nickel-base alloy-by-design studied using synchrotron X-ray diffraction

Mapping the creep life of nickel-based SX superalloys in a large compositional space by a two-model linkage machine learning method

Modeling of creep in nickel-based superalloy based on microtwinning mechanism

Deep learning accelerates the development of Ni-based single crystal superalloys: A physical-constrained neural network for creep rupture life prediction

A Review of Composition Evolution in Ni-based Single Crystal Superalloys

Microstructure Evolution and Formation of Gradient Structures in Single Crystal Nickel-Based Superalloy by Surface Mechanical Creep-Feed Grinding Treatment

Competitive deformation induced by TCP precipitation and creep inconsistency on dendritic structures in a nickel-based single crystal superalloy crept at high temperatures

The Dependence of Stress and Strain Rate on the Deformation Behavior of a Ni‐based Single Crystal Superalloy at 1050°C

Creep behaviors and deformation mechanisms at intermediate temperatures in a novel γ‐γ' nickel‐based superalloy

Microstructural Rejuvenation in a Ni-based Single Crystal Superalloy

Microstructure Evolution and Dislocation Mechanism of a Third-Generation Single-Crystal Ni-Based Superalloy during Creep at 1170 °C

Multi-Scale Crystal Plasticity Model of Creep Responses in Nickel-Based Superalloys