Abstract:The synthesis of ethanol from CO2 electroreduction is a potential technology to produce green fuels. The profit of a plant to treat 10 000 kg CO2 per day is investigated. HYSYS simulations are used to accurately calculate the cost of product separation. It is concluded that existing catalysts can be profitable with the current renewable electricity cost of 2.0× 10−2 £ kWh−1. This research develops a technoeconomic analysis to study the profitability of ethanol production from CO2 electroreduction. A HYSYS simulation is used to calculate the separation costs, a challenge in previous models available in literature. The profitability of a 10 000 kg per day CO2 electroreduction plant to produce ethanol is studied. An optimization of the pressure swing adsorber and distillation tower, which greatly influence the total cost of the plant (≈20% of total cost), is carried out, obtaining a total cost of separation of £1.94× 106. The study demonstrates that reducing the voltage applied to values around 0.5 V, i.e., by increasing the pH up to 12 makes the process economically feasible with a current density over 15 mA cm−2. It also shows that the process is economically feasible using a current density of 5 mA cm−2 if the electricity cost from renewable sources drops to 2.0× 10−2 £ kWh−1. Finally, it is proved that if catalyst stability is not considered, some catalysts currently available in the literature can be used with a positive economic income. The results of this research show that the industrial electroreduction of ethanol can be feasible and can attract interest in the industrial adoption of the technology.

Cutting off the upstream and downstream costs for CO2 electroreduction by upcycling fermentation emissions into ethanol

Upcycling CO2 into Energy-Rich Long-Chain Compounds Via Electrochemical and Metabolic Engineering

A Technoeconomic Model Coupled with HYSYS to Analyze the Electroreduction of Carbon Dioxide to Ethanol

Economically viable CO2 electroreduction embedded within ethylene oxide manufacturing

Enhanced Electroreduction of CO 2 to Ethanol via Enriched Intermediates under High CO 2 Pressure

Scalable Electro‐Biosynthesis of Ectoine from Greenhouse Gases

Electrifying the future: the advances and opportunities of electrocatalytic carbon dioxide reduction in acid

Electroosmotic flow steers neutral products and enables concentrated ethanol electroproduction from CO2

Eliminating the need for anodic gas separation in CO2 electroreduction systems via liquid-to-liquid anodic upgrading

Electrochemical Conversion of CO 2 to Ethyl Formate in Ethanol

Electrolytic cell engineering and device optimization for electrosynthesis of e-biofuels via co-valorisation of bio-feedstocks and captured CO2

A novel tandem reactor design based on nano-Cu electrocatalysts and microbial biocatalysts for converting CO<sub>2</sub> into ethylene and acetate

Regulating Interfacial Hydrogen‐Bonding Networks by Implanting Cu Sites with Perfluorooctane to Accelerate CO2 Electroreduction to Ethanol

Efficient electrically powered CO2-to-ethanol via suppression of deoxygenation

Mitigating Carbonate Formation in CO2 Electrolysis

Acidic media enables oxygen-tolerant electrosynthesis of multicarbon products from simulated flue gas

Scalable and low-energy decoupled electrochemical CO2 capture

A coupled electrocatalytic system with reduced energy input for CO2 reduction and biomass valorization

Efficient CO2 Electroreduction to Ethanol by Cu3 Sn Catalyst

Coupling methanol oxidation with CO2 reduction: A feasible pathway to achieve carbon neutralization

Electron-Efficient Co-electrosynthesis of Formates from CO2 and Methanol Feedstocks