Improving the Collision Tolerance of High-Speed Industrial Robots via Impact-Aware Path Planning and Series Clutched Actuation

Frederik Ostyn,Bram Vanderborght,Guillaume Crevecoeur
DOI: https://doi.org/10.1109/tro.2024.3475208
IF: 7.8
2024-10-25
IEEE Transactions on Robotics
Abstract:Robots are more often deployed in unstructured or unpredictable environments. Particularly collisions at high speed can severely damage the drivetrains and joint bearings of robots. In order to avoid such collisions, path planners exist that adapt the robot's original trajectory online if a collision hazard is detected. These methods require additional sensors such as cameras, are computationally costly and never flawless due to occlusions. Another approach is to incorporate a cost function that promotes collision tolerance while planning the initial trajectory. The resulting impact-aware path plan minimizes the chance of robot hardware damage if a collision would occur. Two algorithms are presented to assess collision tolerance in high-speed robots, taking into account factors such as robot pose, impact direction, and maximum intermittent loading of the gearboxes and bearings. The first algorithm is more general while the second assumes the presence of joint overload clutches that decouple upon impact. These algorithms are applied to plan an impact-aware path for a custom 6-axis series clutched actuated robot that serves as use case. Both for the case with and without clutches, a generic impact-aware plan is presented as well as at least one derived, heuristic alternative. Without clutches, trajectories that are perpendicular to the end effector flange were found to be desirable, as they allow the robot to mitigate the highest collision force without overloading the gearboxes or bearings. On the other hand, with clutches, trajectories that are parallel to the end effector flange were found to be more collision tolerant. The effect of impact direction was also experimentally validated using the custom 6-axis robot. Collisions at velocities up to 1.2 m/s were mitigated through the combination of impact-aware path planning and series clutched actuation.
robotics
What problem does this paper attempt to address?