Abstract:Environmental compatibility requires low-emission burners for gas turbine power plants as well as for jet engines. In the Past, significant progress has been made developing low NOx and CO burners. Unfortunately, these burners often have a more pronounced tendency than conventional burner designs to produce combustion driven oscillations. The oscillations may be excited to such an extent that pronounced pulsation may possibly occur; this is associated with a risk of engine failure. The stability of a burner system can be investigated by means of a stability analysis under the assumption of acoustical behavior. The problem with all these algorithms is the transfer function of the flame. A new method is presented here to predict the dynamic flame behavior by means of a full Navier-Stokes simulation of the complex combustion process. The first step is to get a steady-state solution of a flame configuration. After that a transient simulation follows with a sudden change in the mass flow rate at the flame inlet. The time-dependent answer of the flame to this disturbance is then transformed into the frequency space by a Laplace Transformation. This leads, in turn, to the frequency response representing the dynamic behavior of the flame. In principle, this method can be adapted for both diffusion as well as premixed flame systems. However, due to the fact that diffusion flames are more controlled by the mixing process than by the chemical kinetic, the method has first been used for the prediction of the dynamic behavior of turbulent diffusion flames. The combustion has been modelled by a mixed-is-burnt model. The influence of the turbulence has been taken into account by a modified k-ε model and the turbulence influences the combustion rate by presumed probability density functions (pdf). The steady state as well as the transient results have been compared with experimental data for two different diffusion flame configurations. Although the burner configuration is relatively complex, the steady-state results collaborate very well with the experiments for velocity, temperature, and species distribution. The most important result is that the heat release that drives the oscillations can be modeled sufficiently accurately. The effect of using different pdf models has been discussed and the best model has been used for the transient calculations of the dynamic flame behavior. The results for the frequency response of the flame are very encouraging. The principal behavior of the flame—higher order time element with a delay time—can be predicted with sufficient precision. In addition, the qualitative results collaborate fairly well with the experiments.

Numerical analysis of the fractal-fractional diffusion model of ignition in the combustion process

Low Mach number lattice Boltzmann model for turbulent combustion: flow in confined geometries

Direct numerical simulations of rich premixed turbulent n-dodecane/air flames at diesel engine conditions

Extremely Low Order Time-Fractional Differential Equation and Application in Combustion Process

Quenching Study of Two-Dimensional Fractional Reaction–diffusion Equation from Combustion Process

Numerical Simulation for Combustion of Droplet with Volume of Fluid Formulation

Analysis of heat and mass transfer on nanofluid: An application of hybrid fractal-fractional derivative

NUMERICAL SIMULATIONS OF GAS DIFFUSION AND REACTION IN FRACTAL PORES DURING CHAR COMBUSTION

An operational matrix method for nonlinear variable-order time fractional reaction–diffusion equation involving Mittag-Leffler kernel

Combustion Model of Natural Gas Engine Ignited by Pilot Diesel Based on Fractal

A Combustion Kinetic Model Based on the Fast Chemistry Assumption: Application to Non-Sooty and Sooty Laminar Diffusion Flames

Analytical and Numerical Conceptions of Flame Propagation in Porous Media with a Generalization in Diffusion and Reaction Modeling

Numerical modeling of mixed convective nanofluid flow with fractal stochastic heat and mass transfer using finite differences

Numerical Predication of the Dynamic Behavior of Turbulent Diffusion Flames

Comprehensive Numerical Analysis of Time-Fractional Reaction–Diffusion Models with Applications to Chemical and Biological Phenomena

Analysis of fractionalized Brinkman flow in the presence of diffusion effect

Mathematical Model of Critical Condition for Friction Ignition

Analysis of Operator Splitting Errors for Near-Limit Flame Simulations.

A Forced Ignition Probability Analysis Method Using Kernel Formation Analysis with Turbulent Transport and Lagrangian Flame Particle Tracking

Numerical Simulations of Low Temperature Ignition Chemistry with Flow, Temperature, and Species Fluctuations in High Pressure Counterflow Flames

A Computational Numerical Algorithm for Thermal Characterization of Fractional Unsteady Free Convection Flow in an Open Cavity