Multi-objective design optimization of battery thermal management system for electric vehicles

Shaosen Su,Wei Li,Yongsheng Li,Akhil Garg,Liang Gao,Quan Zhou
DOI: https://doi.org/10.1016/j.applthermaleng.2021.117235
IF: 6.4
2021-09-01
Applied Thermal Engineering
Abstract:<p>Lithium batteries are commonly used as the primary power storage unit for electric vehicles, and their performance is sensitive to temperature. Thus, the battery thermal management system is crucially needed to allow the EVs to work safely and efficiently. This paper mainly focuses on the performance analysis and design optimization of the battery thermal management system with a U-shaped cooling channel. A Computational fluid dynamics model of a battery thermal management system is built to study the battery temperature distribution and pressure distribution. Through the establishment of the genetic programming model, sensitivity analysis and parameter interaction analysis are carried out to analyze the influence of cooling plate thickness, cooling plate wall thickness, inlet coolant temperature and flow velocity on the comprehensive performance of the battery thermal management system. A new surrogate-assisted multi-objective optimization scheme is proposed by introducing an integrated AI system that includes a surrogate battery model built with genetic programming (GP) and a design optimizer driven by the second-generation non-dominated sorting genetic algorithm (NSGA-II). Results show that the inlet coolant temperature has the most significant influence on the rise of battery temperature (59.87%) but has no influence on the pressure drop. The structural parameters of the cooling plate and the velocity of the inlet coolant have apparent effects on the uniformity of the battery temperature distribution and the pressure drop. The battery thermal management system achieves an ideal comprehensive performance when the thickness of the cooling plate is 4.50 mm, the thickness of the cooling plate wall is 1.49 mm, the inlet coolant temperature is 298.15 K, and the inlet coolant velocity is 0.29 m/s. Under such optimized parameter settings, the max temperature rise of the battery reduces from 7.72 K to 7.69 K, the standard deviation of the temperature distribution 2.54 K (a drop of 0.02 K), and the pressure drop decrease from 1022.1 Pa to 436.43 Pa (decrease by 57.3%). Such results have guiding significance for the design of the battery thermal management system with a U-shaped channel and the application of genetic programming in system performance analysis and optimization.</p>
energy & fuels,engineering, mechanical,thermodynamics,mechanics
What problem does this paper attempt to address?
### Problems Addressed by the Paper The paper primarily investigates the design optimization of Battery Thermal Management Systems (BTMS) for electric vehicles. Specifically, it focuses on liquid cooling systems with U-shaped cooling channels. The goal is to optimize the overall performance of the system while ensuring the effectiveness of the battery thermal management system. The specific problems the paper aims to address are as follows: 1. **Temperature Control**: - During charging and discharging, batteries generate a significant amount of heat. If not dissipated in time, this can lead to reduced battery life or even safety hazards such as thermal runaway, fires, and explosions. Therefore, a reliable battery thermal management system needs to be designed to ensure the battery pack operates within an appropriate temperature range. 2. **Geometric Parameter Optimization**: - By optimizing the geometric parameters of the cooling plate (such as cooling plate thickness, cooling plate wall thickness, inlet temperature, and flow rate), the uniformity of the battery temperature distribution can be improved, and pressure loss can be reduced, thereby achieving better thermal management performance. 3. **Multi-Objective Optimization Method**: - A new surrogate-assisted multi-objective optimization scheme is proposed, combining Genetic Programming (GP) to establish the battery model and using the Non-dominated Sorting Genetic Algorithm II (NSGA-II) for design optimization. The aim is to find an optimal design that balances temperature difference (TD), temperature standard deviation (TSD), and pressure loss (PD). 4. **Model Validation and Application**: - The effectiveness of the proposed optimization scheme is validated and applied to the actual design of battery thermal management systems to guide future designs and applications. Through the above research, the paper aims to provide an effective optimization scheme for battery thermal management systems to enhance the safety and efficiency of electric vehicle batteries.