From waste disposal to valuable material: Sulfonating polystyrene waste for heavy metal removal
Anh T.K. Tran,Thi Thuy Pham,Quoc Hung Nguyen,Nhung T.T. Hoang,Duy Tan Bui,Minh Ti Nguyen,Manh Khai Nguyen,Bart Van der Bruggen
DOI: https://doi.org/10.1016/j.jece.2020.104302
IF: 7.7
2020-10-01
Journal of Environmental Chemical Engineering
Abstract:The conversion of waste into reusable materials has been a focus of many researchers in recent years. Polystyrene waste converted into a cation exchange resin and used as absorbent of cadmium, copper and zinc had been concerned. In this study, the feasibility of sulfonating polystyrene waste was investigated by using sulfuric acid to form sulfonated functional groups on the polystyrene matrix and further used for heavy metal ions removal from wastewater. The modified ion exchange materials were characterized by FTIR, SEM, EDS, XRD and TGA. Batch mode experiments of heavy metal ion exchange were conducted to determine the kinetic parameters. The adsorption of zinc, copper and cadmium by the sulfonated polystyrene fitted with both the Langmuir and the Freundlich isotherm model; the maximum adsorption capacities were 4.09 mg Zn2+/g, 4.58 mg Cu2+/g and 4.04 mg Cd2+/g, respectively. Moreover, fixed-bed adsorption was investigated. When the flow rate decreased, the initial concentration, and the mass of sulfonated polystyrene increased, the adsorption capacity was observed to increase. A maximum adsorption capacity of 10.6 mg Zn2+/g was achieved at the influent concentration of 70 mg/L, sulfonated polystyrene mass of 30 g, and flow rate of 8.33 mL/min when operating with real zinc electroplating wastewater. The kinetic Thomas and Yoon-Nelson models well described the adsorption of Zn2+, Cu2+, and Cd2+ in continuous mode, with R2 value higher than 90 %. From these results, it can be concluded that this sulfonation process of polystyrene waste can be technically and environmentally feasible method for sustainable development.
engineering, chemical, environmental