Abstract:Oil-based drilling fluids (OBDFs) are extensively used in the drilling industry due to their superior performance in challenging drilling conditions. These fluids control wellbore stability, lubricate the drill bit, and transport drill cuttings to the surface. One important component of oil-based drilling fluids is the viscosifier, which provides rheological properties to enhance drilling operations. This study evaluates the effectiveness of Claytone-IMG 400, a novel rheological agent, in enhancing the performance of OBDFs under high-pressure and high-temperature (HPHT) conditions. A comparative analysis was conducted with a pre-existing organoclay (OC) to assess the improvements achieved by Claytone-IMG 400. The OCs were analyzed using X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), and particle size distribution (PSD) to identify their mineral and chemical compositions, morphologies, and particle sizes. The drilling fluid density, electrical stability, sagging tendency, rheological properties, viscoelastic properties, and filtration properties were studied to formulate a stable and high-performance drilling fluid. The results confirmed that the novel OC does not affect the drilling fluid density but enhances the emulsion stability with a 9% increment compared with the drilling fluid formulated with MC-TONE. The sagging experiments showed that Claytone-IMG 400 prevented the sagging issues in both static and dynamic conditions. Also, Claytone-IMG 400 improved the plastic viscosity (PV), yield point (YP), and apparent viscosity (AV). The PV, YP, and AV were improved by 30%, 38%, and 33% increments respectively compared with the drilling fluid formulated with MC-TONE. The YP/PV ratio increased with a 6% increment from 1.12 to 1.19. Moreover, the gel strength (GS) was significantly increased, and the filtration properties were enhanced. The filtration volume was reduced by 10% from 5.0 to 4.5 cm 3 , and the filter cake thickness had a 37.5% reduction from 2.60 to 1.89 mm. The novelty of this study is highlighted by the introduction and evaluation of Claytone-IMG 400 as a new rheological additive for safe, efficient, and cost-effective drilling operations. The results indicate that Claytone-IMG 400 significantly improves the stability and performance of OBDFs, thereby reducing wellbore instability and drilling-related problems.

Influencing of Cations on the Rheological Properties and Filtration of Iraqi Attapulgite

Studying the Effect of Geological Formation and Formation Water on Drilling Fluid Performance (Case Study)

Enhancing the properties of high-density oil well cement with Qusaiba kaolinite

Experimental study of hydrophilic additives on filter cake permeability and filtrate losses

Enhancement of Static and Dynamic Sag Performance of Water-Based Mud Using a Synthetic Clay

Effects of anionic additives on the rheological behavior of aqueous calcium montmorillonite suspensions

Analysis of Effects of Foreign Clay and Local Clay Additives on Viscosity of Water Based Drilling Mud

How the Solid/Liquid Ratio Affects the Cation Exchange Process and Porosity in the Case of Dioctahedral Smectite: Structural Analysis?

Preparation and Rheological Properties of Attapulgite Gel for Aqueous Suspensions

Influence of alkyl chain length in ionic liquid based drilling mud for rheology modification: a review

Physico-chemical and rheological characterization of water-based mud in the presence of polymers

Impact of Perlite on the Properties and Stability of Water-Based Mud in Elevated-Temperature Applications

Assessing the Rheological and Filtration Loss Control Potential of Selected Plant-Based Additives in Oil-Based Mud

The Effect of Biopolymer Chitosan on the Rheology and Stability of Na-Bentonite Drilling Mud

The filtration of aqueous clay mineral suspension in the presence of bitumen

Evaluation of filtration characteristics of bentonite-free water-based mud utilizing carboxymethylated tapioca starch

Investigating the efficacy of novel organoclay as a rheological additive for enhancing the performance of oil-based drilling fluids

Preparation and characterization of clay based ceramic porous membranes and their use for the removal of lead ions from synthetic wastewater with an insight into the removal mechanism

Evaluation of using micronized saudi calcite in ilmenite-weighted water-based drilling fluid

Effect of Amorphous Silica Produced from Pumice and Quartzite on the Flow Characteristics of Drilling Mud

Rheological Behavior of Clay Tailings in the Presence of Divalent Cations and Sodium Polyacrylate: Insights from Molecular Dynamics Simulations