Abstract:The use of solar photocatalysts to degrade organic pollutants is not only the most promising and efficient strategy to solve pollution problems today but also helps to alleviate the energy crisis. In this work, MoS2/SnS2 heterogeneous structure catalysts were prepared by a facile hydrothermal method, and the microstructures and morphologies of these catalysts were investigated using XRD, SEM, TEM, BET, XPS and EIS. Eventually, the optimal synthesis conditions of the catalysts were obtained as 180 °C for 14 h, with the molar ratio of molybdenum to tin atoms being 2:1 and the acidity and alkalinity of the solution adjusted by hydrochloric acid. TEM images of the composite catalysts synthesized under these conditions clearly show that the lamellar SnS2 grows on the surface of MoS2 at a smaller size; high-resolution TEM images show lattice stripe distances of 0.68 nm and 0.30 nm for the (002) plane of MoS2 and the (100) plane of SnS2, respectively. Thus, in terms of microstructure, it is confirmed that the MoS2 and SnS2 in the composite catalyst form a tight heterogeneous structure. The degradation efficiency of the best composite catalyst for methylene blue (MB) was 83.0%, which was 8.3 times higher than that of pure MoS2 and 16.6 times higher than that of pure SnS2. After four cycles, the degradation efficiency of the catalyst was 74.7%, indicating a relatively stable catalytic performance. The increase in activity could be attributed to the improved visible light absorption, the increase in active sites introduced at the exposed edges of MoS2 nanoparticles and the construction of heterojunctions opening up photogenerated carrier transfer pathways and effective charge separation and transfer. This unique heterostructure photocatalyst not only has excellent photocatalytic performance but also has good cycling stability, which provides a simple, convenient and low-cost method for the photocatalytic degradation of organic pollutants.

S defect-rich MoS 2 aerogel with hierarchical porous structure: Efficient photocatalysis and convenient reuse for removal of organic dyes

Designing 3d‐mos2sponge As Excellent Cocatalysts in Advanced Oxidation Processes for Pollutant Control

Efficient degradation of PPCPs by Mo<sub>1-x</sub>S<sub>2-y</sub> with S vacancy at phase-junction: Promoted by innergenerate-H<sub>2</sub>O<sub>2</sub>

3D MoS2@TiO2@poly(methyl Methacrylate) Nanocomposite with Enhanced Photocatalytic Activity.

A Novel 3D Nanofibrous Aerogel-Based MoS2@Co3S4 Heterojunction Photocatalyst for Water Remediation and Hydrogen Evolution under Simulated Solar Irradiation

Exfoliation of 2D materials by saponin in water: Aerogel adsorption / photodegradation organic dye

Flexible, Recoverable, and Efficient Photocatalysts: MoS2/TiO2 Heterojunctions Grown on Amorphous Carbon-Coated Carbon Textiles.

Hydrothermal Synthesis of MoS2/SnS2 Photocatalysts with Heterogeneous Structures Enhances Photocatalytic Activity

High efficiency photocatalysis for pollutant degradation with MoS2/C3N4 heterostructures

Ag3PO4 nanoparticles loaded on 3D flower-like spherical MoS2: a highly efficient hierarchical heterojunction photocatalyst

Data on Novel C Fibers@mose2 Nanoplates Core–shell Composite for Highly Efficient Solar-Driven Photocatalytically Degrading Environmental Pollutants

Layer-controlled Growth of MoS2 on Self-Assembled Flower-Like Bi2S3 for Enhanced Photocatalysis under Visible Light Irradiation

Facile synthesis of MOF-808/RGO-based 3D macroscopic aerogel for enhanced photoreduction CO2

3D Graphene Aerogels/sb2wo6 Hybrid with Enhanced Photocatalytic Activity under UV- and Visible-Light Irradiation

Adopting sulfur-atom sharing strategy to construct CoS2/MoS2 heterostructure on three-dimensional nitrogen-doped graphene aerogels: A novel photocatalyst for wastewater treatment

Surfactant-assisted hydrothermal synthesis of MoS2 micro-pompon structure with enhanced photocatalytic performance under visible light

Template-directed growth of sustainable carboxymethyl cellulose-based aerogels decorated with ZIF-67 for activation peroxymonosulfate degradation of organic dyes

Three-dimensional Reduced Graphene Oxide Aerogel Stabilizes Molybdenum Trioxide with Enhanced Photocatalytic Activity for Dye Degradation

Rational design 2D/3D MoS2/In2O3 composites for great boosting photocatalytic H2 production coupled with dye degradation

Three CoS/CoO microspheres and their mixed matrix membranes for the highly efficient photocatalytic degradation of methyl blue

Enhanced Photocatalytic Degradation of Cr (VI) and Organic Pollutants Using Novel 3D/2D MoS 2 /SnS 2 Heterostructures for Water Remediation