Weiguo Cao,Wenjuan Li,Shuo Yu,Yun Zhang,Chi-Min Shu,Yifei Liu,Jingwen Luo,Lingtao Bu,Yingxin Tan
Abstract:<p>Explosion venting can effectively reduce the damage effect caused by accidental gas explosions during industrial production. Determining how to eliminate secondary disasters during an explosion is therefore a challenge that can be addressed through the application of explosion venting. This paper discussed the temperature effects and pressure characteristics of premixed hydrogen-air mixtures (PHAMs) in the safety design of vent devices. Tests were designed for the behaviours of hydrogen explosion venting under different bursting pressures. The variation in pressure was controlled by a pressure sensor on the inner wall of a spherical container, and the safety design was assessed theoretically. A high-speed photography device and infrared thermal imaging device were employed to capture the real-time flame field and temperature field during the hydrogen explosion venting process. A comparison of the dimensions of both fields revealed that the high-temperature area was smaller than the flame area. An evaluation of the dynamic hazard of hydrogen explosion venting was then performed based upon pressure characteristics and temperature effects. It was concluded that the prediction results of explosion venting diameter is crucial for industrial safety design.</p>
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: **How to evaluate the influence of temperature effects and pressure characteristics on the safety design of pressure relief devices by studying the explosion pressure relief process of premixed hydrogen - air mixtures (PHAMs) in spherical vessels, so as to reduce secondary disasters and improve safety in industrial production**.
Specifically, the paper focuses on the following aspects:
1. **Hazard analysis of explosion pressure relief**: Through experiments and theoretical calculations, the variation laws of the temperature field and pressure field during the hydrogen explosion pressure relief process under different bursting pressure conditions are explored.
2. **Safety design evaluation of pressure relief devices**: Based on experimental data, the applicability of existing industrial pressure relief standards (such as NFPA 68 and EN 14491) is evaluated, and the possibility of expanding these standards is explored.
3. **Dynamic hazard assessment**: Combining pressure characteristics and temperature effects, the dynamic hazards during the hydrogen explosion pressure relief process are evaluated, providing a reference basis for industrial safety design.
### Main content of the paper
#### 1. Introduction
The paper points out that with the increasingly wide application of hydrogen energy as a clean energy, the safety issue of hydrogen has become particularly important. Hydrogen has characteristics such as easy leakage, wide explosion range, low ignition energy, and fast flame propagation speed, which are prone to cause combustion and explosion accidents. Therefore, strengthening the basic research on hydrogen explosion pressure relief is crucial for reducing accident losses and ensuring the safety of personnel and property.
#### 2. Experimental methods
The experiment used a spherical vessel with an inner diameter of 0.34 meters, and the pressure relief function was achieved by changing the diameter and thickness of the rupture disc. The experimental conditions included room temperature of 20 - 30°C, humidity of 20% - 30%, and initial pressure of 1 atm. High - speed photography equipment and infrared thermal imaging equipment were used in the experiment to capture the changes in the flame field and temperature field respectively.
#### 3. Flame propagation and temperature effects
- **Flame size analysis**: Through high - speed photography and infrared thermal imaging technology, the size differences between the flame field and the temperature field were compared. The results show that the high - temperature area is smaller than the flame area, mainly because heat exchange occurs between the flame edge and the outside air.
- **Flame front distance and propagation speed**: The effects of hydrogen volume fraction, pressure relief conditions, and internal explosion pressure on flame propagation were studied. The results show that as the hydrogen volume fraction increases, the maximum flame front length gradually increases, while the maximum flame propagation speed first increases and then decreases.
- **Temperature field change**: Through the infrared thermal imaging equipment, the change of the temperature field during the pressure relief process was captured in real time. The results show that the high - temperature area mainly appears at a position more than 0.1 meters away from the pressure relief port, forming an approximately elliptical fireball.
#### 4. Influence of pressure characteristics on explosion pressure relief
- **Typical maximum pressure reduction value (Pred)**: Based on the experimental data, a curve graph of the explosion pressure changing with time was drawn. The results show that when the pressure in the container reaches the bursting pressure of the rupture disc, the pressure relief process begins. Eventually, due to insufficient fuel, the explosion pressure drops and enters the final stage of the pressure relief process.
- **Discussion on pressure relief safety design**: Based on the experimental data, the applicability of existing industrial pressure relief standards (such as NFPA 68 and EN 14491) was verified, and the possibility of expanding these standards was explored. An improved calculation formula for the pressure relief area was proposed to adapt to higher bursting pressures and smaller container volumes.
### Conclusion
Through the research on the explosion pressure relief process of premixed hydrogen - air mixtures in spherical vessels, the paper analyzed in detail the influence of temperature effects and pressure characteristics on the safety design of pressure relief devices. The research results provide an important theoretical basis for reducing secondary disasters and a reference for expanding the application range of existing industrial pressure relief standards.