Abstract:The cathodic product Li2CO3, due to its high decomposition potential, has hindered the practical application of rechargeable Li-CO2/O2 batteries. To overcome this bottleneck, a Pt/FeNC cathodic catalyst is fabricated by dispersing Pt nanoparticles (NPs) with a uniform size of 2.4 nm and 8.3 wt % loading amount into a porous microcube FeNC support for high-performance rechargeable Li-CO2/O2 batteries. The FeNC matrix is composed of numerous two-dimensional (2D) carbon nanosheets, which is derived from an Fe-doping zinc metal-organic framework (Zn-MOF). Importantly, using Pt/FeNC as the cathodic catalyst, the Li-CO2/O2 (VCO2/VO2 = 4:1) battery displays the lowest overpotential of 0.54 V and a long-term stability of 142 cycles, which is superior to batteries with FeNC (1.67 V, 47 cycles) and NC (1.87 V, 23 cycles) catalysts. The FeNC matrix and Pt NPs can exert a synergetic effect to decrease the decomposition potential of Li2CO3 and thus enhance the battery performance. In situ Fourier transform infrared (FTIR) spectroscopy further confirms that Li2CO3 can be completely decomposed under a low potential of 3.3 V using the Pt/FeNC catalyst. Impressively, Li2CO3 exhibits a film structure on the surface of the Pt/FeNC catalysts by scanning electron microscopy (SEM), and its size can be limited by the confined space between the carbon sheets in Pt/FeNC, which enlarges the better contacting interface. In addition, density functional theory (DFT) calculations reveal that the Pt and FeNC catalysts show a higher adsorption energy for Li2CO3 and Li2CO4 intermediates compared to the NC catalyst, and the possible discharge pathways are deeply investigated. The synergetic effect between the FeNC support and Pt active sites makes the Li-CO2/O2 battery achieve optimal performance.

Enhanced Stable and High Voltage of Li/SOCl 2 Battery Catalyzed by FePc Particulates Fixed on Activated Carbon Substrates

Three-Dimensional Ordered Fevo4 Nanocatalyst-Modified Separator Enables Suppressed Polysulfides Shuttling and Boosted Redox Conversion in Li-S Batteries

Chloride‐Reinforced Carbon Nanofiber Host As Effective Polysulfide Traps in Lithium–Sulfur Batteries

Stable and improved voltage plate of Li/SOCl2 battery using carbon electrodes with active carbon

Engineering Fe and V Coordinated Bimetallic Oxide Nanocatalyst Enables Enhanced Polysulfides Mediation for High Energy Density Li-S Battery.

Crystalline-amorphous heterostructure on the phosphatized P-CoS 2 /CNT for augmenting the catalytic conversion kinetics of Li-S batteries

Fe phthalocyanine supported by graphene nanosheet as catalyst in Li–air battery with the hybrid electrolyte

Efficient Fe3C-CF Cathode Catalyst Based on the Formation/Decomposition of Li2−xO2 for Li-O2 Batteries

Carbon microspheres with embedded FeP nanoparticles as a cathode electrocatalyst in Li-S batteries

Enhancing Sulfur Redox Conversion of Active Iron Sites by Modulation of Electronic Density for Advanced Lithium‐Sulfur Battery

Carbonized Bacterial Cellulose Decorated with ZIF-8 Derived Iron Single-Atom Catalyst Nanocages As a Cathode Host for Lithium-Sulfur Batteries

Pt Nanoparticles Confined in a 3D Porous FeNC Matrix as Efficient Catalysts for Rechargeable Li-CO2/O2 Batteries

Oxygen-Deficient Ferric Oxide As an Electrochemical Cathode Catalyst for High-Energy Lithium-Sulfur Batteries.

Enhancing the Reduction Kinetics of LiSF6 Batteries by Dispersed Cobalt Phthalocyanines on Porous Carbon.

Hypercrosslinked Polymerization Enabled N‐Doped Carbon Confined Fe 2 O 3 Facilitating Li Polysulfides Interface Conversion for Li–S Batteries

Anchoring Polysulfides and Accelerating Redox Reaction Enabled by Fe‐Based Compounds in Lithium–Sulfur Batteries

Confined Biomimetic Catalysts Boost LiNO 3 -Free Lithium-Sulfur Batteries via Enhanced LiTFSI Decomposition

Β-Feooh Interlayer with Abundant Oxygen Vacancy Toward Boosting Catalytic Effect for Lithium Sulfur Batteries

Transforming a Primary Li-SOCl2 Battery into a High-Power Rechargeable System via Molecular Catalysis

Enhanced Catalytic Conversion of Polysulfides Using Bimetallic Co7Fe3 for High-Performance Lithium-Sulfur Batteries

Design of filamentous conductive catalyst as separator coating for high-efficiency lithium-sulfur batteries